TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Introduzione

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel pacco. Se alcuni articoli risultano mancanti o danneggiati, contatta il fornitore.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Adattatore di alimentazione
• Mouse USB
• Telecomando
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Guida rapida

Figura 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Informazioni sulla sicurezza

Per evitare lesioni o danni al dispositivo, osservare le seguenti precauzioni di sicurezza:

• Garantire l'alimentazione voltage sia corretto prima di collegare l'NVR.
• Non esporre l'NVR all'acqua o all'umidità.
• Evitare di posizionare l'NVR alla luce diretta del sole o vicino a fonti di calore.
• Install the NVR in a well-ventilated area to prevent overheating.
• Non aprire l'NVR casing. Affidare tutti gli interventi di manutenzione a personale qualificato.
• Utilizzare solo accessori specificati dal produttore.

3. Prodotto finitoview

NVR Front and Rear Panels

Figura 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Indicatori e controlli del pannello frontale:

• ENERGIA: Indicatore di alimentazione.
• STATO: Indicatore di stato del sistema.
• Tx/Rx: Data transmission/reception indicator.
• Pulsanti di controllo: For menu navigation and system control.
• Porta USB: For mouse or USB storage device connection.

Interfacce del pannello posteriore:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• INGRESSO/USCITA AUDIO: Per dispositivi audio esterni.
• Porta LAN: Connect to your network router/switch.
• Uscita HDMI: Connect to a monitor for high-resolution video output (up to 4K).
• Uscita VGA: Connect to a monitor for video output (up to 1080p).
• Potenza in ingresso (48 V): Collegare l'adattatore di alimentazione fornito.
• Interruttore di alimentazione: To turn the NVR on/off.

Caratteristiche principali

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Supporto dal vivo view, storage, and playback of connected cameras.

4. Impostazione

4.1 Installazione del disco rigido (facoltativa)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Svitare e rimuovere il coperchio superiore dell'NVR.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Fissare il disco rigido allo chassis dell'NVR utilizzando le viti fornite.
4. Riposizionare il coperchio superiore e fissarlo con le viti.

4.2 Collegamento delle telecamere

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Figura 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connessione a un display e a una rete

• Collegare un monitor alla porta di uscita HDMI o VGA dell'NVR.
• Collegare un mouse USB a una delle porte USB dell'NVR.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewcapacità di acquisizione.

4.4 Accensione

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Istruzioni per l'uso

5.1 Procedura guidata di configurazione iniziale

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Vivere View

Dopo la configurazione iniziale, l'NVR visualizzerà il live view delle telecamere collegate. È possibile passare dalla modalità a telecamera singola view e griglia multi-camera view using the on-screen controls or the remote control.

5.3 Registrazione

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Riproduzione

Accedi a foo registratotage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Accesso alla rete e remoto Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Manutenzione

6.1 Gestione del disco rigido

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Aggiornamenti firmware

Controllare il produttore website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Pulizia

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Risoluzione Dei Problemi

• Nessun potere:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Nessuna uscita video:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Le telecamere non visualizzano:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Nessuna registrazione:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Problemi di accesso remoto:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web impostazioni del browser.

8. Specifiche

9. Garanzia e supporto

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.