Elitech LogEt 8 BLE Bluetooth Wireless Data Logger User Manual

1. Prodotto finitoview

The Elitech LogEt 8 BLE is a Bluetooth wireless multi-use PDF data logger designed for monitoring temperature in various life science applications. It features a USB port for direct data download and PDF report generation, and Bluetooth connectivity for remote management via the Elitech App.

Caratteristiche principali:

• Tecnologia Bluetooth senza fili: Enables one-click pairing and remote programming/management via the Elitech App within meters.
• Ampio intervallo di misurazione della temperatura: -22℉ to 158℉ (-30℃ to 70℃) with an accuracy of ±0.9℉ (±0.5℃).
• Compatibilità con le app mobili: Free Elitech App for iOS and Android devices facilitates remote logger management and cold chain monitoring.
• Multi-use Capability: Designed for repeated use over approximately 2 years under room temperature conditions.
• Sincronizzazione automatica dei dati: Automatically uploads all recorded data to your account when connected to the Elitech APP.
• High Recording Capacity: Stores up to 16,000 recording points.

Figura 1: Fronte view of the LogEt 8 BLE data logger with labeled components.

2. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nella confezione al momento del disimballaggio:

• 1 x LogEt 8 BLE Data Logger
• 1 x Manuale utente
• 1 certificato di calibrazione

Figure 2: Contents included in the LogEt 8 BLE package.

3. Componenti del dispositivo

Familiarize yourself with the main components of the LogEt 8 BLE data logger:

• Porta USB: Located at the top, protected by a removable cap. Used for direct connection to a computer for data download and configuration.
• Schermo LCD: Displays current temperature, alarm status, recording status, and battery level.
• Pulsante Start: Initiates data recording.
• Pulsante STOP: Halts data recording.
• Embedded Temperature Sensor: Internal sensor for accurate temperature measurement.

4. Impostazione

4.1 Configurazione iniziale

1. Disimballare il dispositivo: Carefully remove the LogEt 8 BLE from its packaging.
2. Ispezionare per danni: Check the device for any visible damage. If damaged, contact customer support.
3. Attivazione della batteria: The device comes with a pre-installed lithium metal battery. No initial activation is typically required.

4.2 Software Installation (Elitech App)

To fully utilize the LogEt 8 BLE's features, download the Elitech App on your mobile device:

• Cercare "Elitech" in the Apple App Store (for iOS) or Google Play Store (for Android).
• Download and install the official Elitech App.
• Crea un account o accedi se ne hai già uno.

4.3 Connessione tramite Bluetooth

Una volta installata l'app:

1. Assicurati che il Bluetooth sia abilitato sul tuo dispositivo mobile.
2. Open the Elitech App.
3. The app will scan for nearby Elitech data loggers. Select your LogEt 8 BLE from the list to pair.
4. Follow any on-screen prompts for one-click pairing.

4.4 Programming the Logger

Before starting a recording, configure the logger's parameters using the Elitech App or by connecting directly to a computer via USB:

• Via Elitech App: Within the app, navigate to the settings for your connected LogEt 8 BLE. You can set parameters such as sampling interval, alarm thresholds, start delay, and recording duration.
• Via USB (PC Software): Remove the protective cap to expose the USB port. Connect the logger to a computer. Use the Elitech data management software (downloadable from the Elitech website) to configure settings.

Figure 3: Default parameters sticker on the side of the device.

5. Istruzioni per l'uso

5.1 Avvio di una registrazione

To begin data logging:

• Premere e tenere premuto il tasto INIZIO button for approximately 3 seconds until the "REC" indicator appears on the LCD screen.
• If a start delay was configured, the logger will begin recording after the specified delay.

5.2 Interruzione di una registrazione

To end data logging:

• Premere e tenere premuto il tasto FERMARE button for approximately 3 seconds until the "END" indicator appears on the LCD screen.
• Alternatively, connect the logger to the Elitech App or PC software and select the option to stop recording.

5.3 Data Download and Report Generation

After recording, data can be retrieved and analyzed:

• Tramite USB: Remove the USB cap and plug the logger into a computer's USB port. The logger will automatically generate a PDF report and a CSV data file. Questi files can be accessed directly from the logger's virtual drive.
• Via Elitech App: Connect the logger to the Elitech App via Bluetooth. The app will automatically sync and upload all data to your account. You can then view graphs, export data, or generate reports directly from the app.

Figure 4: LogEt 8 BLE with USB port exposed and key specifications.

6. Manutenzione

6.1 Informazioni sulla batteria

The LogEt 8 BLE is powered by a non-rechargeable lithium metal battery. The battery is designed to last for approximately 2 years under normal operating conditions. The battery is contained within the equipment and is not user-serviceable. Attempting to replace the battery may damage the device and void the warranty.

6.2 Pulizia

Per pulire il dispositivo:

• Pulisci l'esterno con un panno morbido e asciutto.
• Non utilizzare detergenti abrasivi, solventi o immergere il dispositivo in acqua.

6.3 Conservazione

When not in use, store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Risoluzione Dei Problemi

If you encounter issues with your LogEt 8 BLE, refer to the following common problems and solutions:

• Il dispositivo non si accende: Check battery level on the LCD. If the battery is depleted, the device may need replacement as the battery is not user-serviceable.
• Impossibile connettersi tramite Bluetooth: Ensure Bluetooth is enabled on your mobile device and the Elitech App is open. Make sure the logger is within range. Restart both the logger and your mobile device.
• Nessun dato registrato: Verify that recording was properly started (check for "REC" on LCD). Ensure the logger's memory is not full.
• PDF report not generated: Ensure the logger is connected to a computer's USB port correctly. Try a different USB port or computer. Ensure the USB cap is fully removed.
• Letture imprecise: Ensure the logger's sensor is not obstructed and is placed in an environment suitable for its operating range.

For further assistance, contact Elitech customer support.

8. Specifiche

9. Garanzia e supporto

9.1 Informazioni sulla garanzia

Elitech products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included in your package or visit the official Elitech website for specific warranty terms and conditions applicable to the LogEt 8 BLE.

9.2 Assistenza clienti

For technical support, troubleshooting assistance, or warranty claims, please contact Elitech customer service:

• Websito: Visita www.elitechus.com for FAQs, software downloads, and contact information.
• E-mail/Telefono: Refer to the Elitech websito o sulla confezione del prodotto per i dettagli di contatto più aggiornati.