Manuale utente del supporto da parete per TV Mount-It! No Stud

1. Prodotto finitoview

The Mount-It! No Stud TV Wall Mount (Model MI-376) offers a revolutionary way to hang your television without the need for drilling into wall studs. This innovative TV hanger is designed for most 40-80 inch televisions, supporting weights up to 110 lbs. Its unique design allows for easy installation directly onto drywall, functioning much like a picture frame hanger. The mount features universal VESA pattern compatibility, including 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, and 600x400. It boasts a low-profile tilting design, keeping your TV close to the wall (1.2 inches away) while offering -5 or 0 degree tilt options for optimal viewing angles. The spring-loaded locks ensure quick and secure TV attachment and detachment.

Figura 1.1: The Mount-It! No Stud TV Wall Mount, showing the main wall plate, TV brackets, and included spacers.

2. Informazioni sulla sicurezza

WARNING: Failure to read and follow all instructions may result in property damage, personal injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified installer or Mount-It! customer support.

• Capacità di peso: Do not exceed the maximum weight capacity of 110 lbs (50 kg). This mount is designed for televisions between 40 and 80 inches. Exceeding the weight limit may result in instability causing possible injury.
• Tipo di parete: This mount is specifically designed for drywall installation. Do not install on plaster, concrete, brick, or other wall types without appropriate alternative hardware and professional consultation.
• Strumenti di installazione: Use only the tools specified in the installation guide. Ensure all nails are fully hammered into the wall plate for secure attachment.
• Bambini: Keep children away from the installation area during setup. Do not allow children to play with the mount or attached television.
• Ispezione regolare: Periodically check that the mount and TV are securely attached and that all fasteners are tight.

3. Contenuto della confezione

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! customer service for assistance.

Figura 3.1: All hardware included with the Mount-It! No Stud TV Wall Mount, including the wall mount, TV bracket, various screws, nails, and spacers.

Componenti inclusi:

• Piastra per montaggio a parete
• TV Bracket (Horizontal Mounting Plate)
• Various Screws (M-A, M-B, M-C, M-D, M-F, M-G)
• Nails for Drywall Installation
• Spacers (2 different sizes for tilt adjustment)
• Wall Anchors and Fasteners (for alternative mounting, if needed)
• Spring-loaded release cord

4. Istruzioni per l'installazione

Follow these steps carefully to install your Mount-It! No Stud TV Wall Mount. It is recommended to have a second person assist with hanging the TV.

4.1. Mount Wall Plate to Drywall

1. Position the Wall Mount: Hold the wall mount plate against the desired location on your drywall. Ensure it is at the correct height for your TV.

Figura 4.1.1: A person positioning the wall mount plate on the drywall, preparing to secure it.
2. Nail in One End: While maintaining your hand on the center base of the mount, nail in one end of the wall mount plate. This will temporarily secure it.


Figura 4.1.2: Close-up of a nail being hammered into the wall mount plate, securing it to the drywall. This mount requires no drilling into studs.

3. Livellare il monte: Use a level (not included) to ensure the wall mount plate is perfectly horizontal. Adjust as needed.


Figura 4.1.3: A person using a spirit level to ensure the wall mount is perfectly horizontal before fully securing it.

4. Secure Remaining Nails: Once leveled, hammer in the nail on the opposite end of the wall mount. Then, proceed to hammer in all remaining nails along the wall plate. Some nails may require more applied force to fully seat. Ensure all nails are flush with the mount.

Figura 4.1.4: A person hammering the remaining nails into the wall mount plate to fully secure it to the drywall. The mount is now ready for the TV.

Nota: This mount is designed for drywall installation and does not require drilling into studs. It hangs like a picture frame using multiple nails for secure support.



Figura 4.1.5: An illustration highlighting that no drilling or wall studs are required for the installation of this TV mount, emphasizing its ease of use.

4.2. Attach TV Bracket to Television

1. Fasten VESA Bracket: Place your TV face down on a soft, clean surface. Attach the horizontal TV bracket to the back of your TV using the appropriate screws from the included hardware kit. This mount fits VESA spacing 100mm, 200mm, 300mm, 400mm, and 600mm.


Figura 4.2.1: A person fastening the VESA bracket to the back of a television using a screwdriver, ensuring it aligns with the TV's VESA mounting holes.

2. Select Desired Spacers (for Tilt): If you desire a tilt angle for your TV, attach the appropriate spacers to the lower VESA holes on your TV. The mount includes two sets of spacers: one for a 0-degree tilt (flush with the wall) and another for a -5-degree tilt.


Figura 4.2.2: A person selecting and attaching the desired spacers to the lower VESA holes on the TV, which will determine the tilt angle of the mounted television.

4.3. Hang Television on Wall Mount

1. Unlatch Spring Lock: Before hanging the TV, pull the cord hanging from the wall mount to unlatch the spring lock mechanism. This prepares the mount to receive the TV bracket.


Figura 4.3.1: A person pulling the cord from the wall mount to unlatch the spring lock, which is necessary before hanging the television.

2. Appendere la TV: With assistance, carefully lift the television and align the TV bracket with the wall mount. Gently lower the TV so the bracket hooks onto the wall mount.


Figura 4.3.2: Two individuals carefully lifting and hanging the television onto the installed wall mount, ensuring the TV bracket engages correctly with the mount.

3. Mettere in sicurezza la TV: Once the TV is properly seated on the mount, pull the cord again to re-latch the spring lock. This will securely hold the TV in place.

Figura 4.3.3: A person pulling the cord to re-engage the spring lock, securing the television firmly to the wall mount.

Guida video all'installazione:

5. Istruzioni per l'uso

Once installed, the Mount-It! No Stud TV Wall Mount offers simple operation for viewing and maintenance.

5.1. Regolazione dell'angolo di inclinazione

The tilt angle of your television is determined by the spacers used during installation. You can choose between a 0-degree tilt (TV flush with the wall) or a -5-degree tilt (TV angled slightly downwards). To change the tilt, you will need to unmount the TV, replace the spacers on the lower VESA holes, and then remount the TV.

Figura 5.1.1: Illustration showing the two available tilt settings (0° and -5°) and the corresponding spacers used to achieve them.

5.2. Quick Release Mechanism

The mount features a spring-loaded quick release mechanism. To temporarily unmount your TV (e.g., for cable access or moving), simply pull the hanging cord to unlatch the spring lock. This allows the TV to be lifted off the wall mount. To re-secure, place the TV back on the mount and pull the cord again to re-latch the spring lock.

Figura 5.2.1: Diagram illustrating the spring lock and quick release feature, which allows for easy and secure mounting or unmounting of the TV.

6. Manutenzione

To ensure the longevity and safe operation of your Mount-It! No Stud TV Wall Mount, periodic maintenance is recommended:

• Controllare i dispositivi di fissaggio: Every 6-12 months, visually inspect all nails and screws to ensure they remain tight and secure. If any appear loose, gently re-tighten them.
• Superfici pulite: Use a soft, dry cloth to wipe down the mount and TV bracket to remove dust and debris. Avoid abrasive cleaners or solvents.
• Ispezionare per danni: Check for any signs of wear, corrosion, or damage to the mount components. If any damage is observed, discontinue use and contact Mount-It! customer support.

7. Risoluzione Dei Problemi

If you encounter issues with your Mount-It! No Stud TV Wall Mount, refer to the following common problems and solutions:

If the problem persists, please contact Mount-It! customer support for further assistance.

8. Specifiche

9. Garanzia e supporto

Specific warranty details for the Mount-It! No Stud TV Wall Mount (Model MI-376) are not provided in this manual. For warranty information, product support, or to inquire about replacement parts, please contact Mount-It! directly through their official websito o canali di servizio clienti.

You can visit the official Mount-It! store on Amazon for more information: Mount-It! Amazon Store