Manuale di istruzioni della ventola di raffreddamento AMD Wraith Prism LED RGB

Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AMD Wraith Prism LED RGB Cooler Fan. Designed for optimal thermal performance and customizable aesthetics, this cooler is compatible with various AMD processor sockets. Please read this manual thoroughly before installation to ensure proper setup and functionality.

Caratteristiche del prodotto

Official Genuine AMD Branded Product
Aluminum heat sink with copper core base for efficient heat dissipation
Direct Contact Heat pipes for enhanced thermal transfer
Pre-applied thermal paste for convenient installation
Switchable Overclock Fan profile for performance adjustment
Integrated LED RGB lighting for customizable aesthetics

Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

AMD Wraith Prism LED RGB Cooler Fan
RGB cables (for motherboard connection and USB header)

Immagine: in alto view of the AMD Wraith Prism LED RGB Cooler Fan, showing the fan blades and AMD logo.

AMD Wraith Prism Cooler Fan bottom view with copper heat pipes

Immagine: In basso view of the AMD Wraith Prism LED RGB Cooler Fan, highlighting the copper heat pipes and aluminum fins.

Compatibilità

The AMD Wraith Prism LED RGB Cooler Fan supports the following motherboard sockets:

AM2
AM3
AM3+
AM4

It is compatible with desktop systems.

Configurazione e installazione

Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU cooler mounting instructions if necessary.

Preparare la scheda madre: Ensure the CPU is correctly seated in its socket. The Wraith Prism cooler comes with pre-applied thermal paste, so no additional paste is typically needed unless you choose to replace it.
Posizionare il dispositivo di raffreddamento: Align the cooler's retention clips with the mounting brackets on your motherboard. The cooler can be oriented to allow the AMD logo to be readable from the top-left, or as preferred.
Fissare il frigorifero: Attach one side of the cooler's retention clip to the motherboard bracket. Apply gentle, even pressure to the opposite side of the cooler while pushing down the second retention clip until it locks into place. Ensure the cooler is firmly seated and does not wobble.
Connect the Fan Power: Connect the 4-pin fan power cable from the cooler to the CPU_FAN header on your motherboard.
Adjust Fan Speed Switch: Locate the H/L (High/Low) fan speed switch on the side of the cooler. Set it to 'H' for higher maximum RPMs and increased cooling performance, or 'L' for quieter operation. This should be done before installing other components that might obstruct access.
Connect RGB Cables:
- For motherboard RGB control: Connect the 4-pin RGB cable to a compatible 4-pin 12V RGB header on your motherboard.
- For software RGB control (via AMD/Cooler Master software): Connect the USB 2.0 header cable to an available USB 2.0 header on your motherboard. Do not connect both the 4-pin RGB and USB 2.0 cables simultaneously for RGB control, as this can cause conflicts. Choose one method.

Video: Unboxing and initial handling of the AMD Wraith Prism cooler, showing its components and pre-applied thermal paste.

Operazione

Once installed and connected, the AMD Wraith Prism cooler will automatically begin operating when your system powers on. The fan speed will adjust based on CPU temperature, managed by your motherboard's fan control settings or the selected fan profile (H/L switch).

Controllo dell'illuminazione RGB

The Wraith Prism features customizable RGB lighting. You have two primary options for controlling the lighting:

Software della scheda madre: If you connected the 4-pin RGB cable to your motherboard, you can use your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to synchronize and control the cooler's lighting with other system components.
AMD/Cooler Master Software: If you connected the USB 2.0 header cable, you can download and install the AMD Wraith Prism software (developed by Cooler Master) from the official AMD website. This software provides granular control over the cooler's RGB effects, including the fan, outer ring, and AMD logo. Note that using this software typically means the motherboard's RGB control will be overridden or disabled for the cooler.

Importante: Do not connect both the 4-pin RGB cable and the USB 2.0 header cable for RGB control simultaneously. Choose one method to avoid potential conflicts or damage.

Video: Demonstration of the AMD Wraith Prism cooler's RGB lighting effects within a PC build, showcasing various color changes and patterns.

Video: Primo piano view of the AMD Wraith Prism fan's RGB lighting in operation, highlighting the vibrant colors and smooth transitions.

Manutenzione

Regular maintenance helps ensure optimal performance and longevity of your cooler.

Rimozione della polvere: Periodically clean dust from the fan blades and heatsink fins using compressed air or a soft brush. Ensure the system is powered off before cleaning.
Pasta termica: The pre-applied thermal paste is designed for long-term use. If you need to remove and re-install the cooler, it is recommended to clean off the old thermal paste from both the CPU and cooler base and apply new thermal paste.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
Temperature elevate della CPU	Improper cooler installation, insufficient thermal paste, dust buildup, fan speed set too low.	Re-seat the cooler to ensure proper contact with the CPU. Check if thermal paste is adequately applied (re-apply if necessary). Clean dust from the heatsink and fan. Ensure the H/L switch is set to 'H' for higher performance. Verify fan speed settings in BIOS/UEFI or motherboard software.
La ventola non gira	Fan power cable disconnected, faulty fan.	Check the 4-pin fan power cable connection to the CPU_FAN header. Se disponibile, testare la ventola su un altro connettore.
Illuminazione RGB non funzionante	Incorrect RGB cable connection, software conflict, incompatible motherboard header.	Ensure only ONE RGB control cable (4-pin RGB or USB 2.0) is connected. Verify the 4-pin RGB cable is connected to a 12V RGB header (not 5V ARGB). Install or update the appropriate RGB control software (motherboard or AMD/Cooler Master). Controllare che non vi siano collegamenti allentati.
Rumore eccessivo	Fan speed too high, dust buildup, loose fan.	Adjust fan speed settings in BIOS/UEFI or software. Pulisci la polvere dalla ventola e dal dissipatore di calore. Assicurarsi che la ventola sia montata saldamente. Set the H/L switch to 'L' for quieter operation if performance allows.

Specifiche

Caratteristica	Dettaglio
Marca	Degenerazione maculare
Numero di modello	AM4 (Often used as a model identifier for stock coolers, refers to socket compatibility)
Socket supportati	AM2, AM3, AM3+, AM4
Metodo di raffreddamento	Air Cooling (Heatsink with Fan)
Materiale del dissipatore di calore	Aluminum, Copper (Copper core base, aluminum fins)
Tipo di connettore di alimentazione	4-Pin (PWM)
Voltage	12 Volt
Cosatage	105W (TDP)
Massima velocità di rotazione	1800 giri al minuto
Livello di rumore	30 decibel (massimo)
Dimensioni del prodotto	9.45 cm L x 27.17 cm P x 0.98 cm A (Note: Dimensions may vary slightly or represent packaging. Please refer to official AMD documentation for precise measurements.)

Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale AMD webo contattare il servizio clienti AMD. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Official AMD Support: www.amd.com/en/support

AMD Wraith Prism