Lutron Caseta 3 Way Smart Dimmer Light Switch Kit Instruction Manual

Prodotto finitoview

The Lutron Caseta 3 Way Smart Dimmer Light Switch Kit provides convenient smart lighting control for your home. This system integrates seamlessly into smart home environments, offering automated light adjustment for various settings. Control your lights from anywhere using the included Pico remote or through a smartphone when connected to the Lutron Caseta Smart Hub (sold separately).

This kit is designed for easy installation and broad compatibility, supporting up to 600-Watt for incandescent or halogen bulbs and 150-Watt for dimmable LEDs, with no neutral wire required.

Image: The Lutron Caseta 3 Way Smart Dimmer Light Switch Kit, showing the dimmer, Pico remote, and wallplate bracket.

Cosa c'è nella scatola:

• (1) Caseta Smart Dimmer Switch
• (1) Pico remote
• (1) Wallplate Bracket

Note: Claro Wallplate and Lutron Caseta Smart Hub (L-BDG2-WH) are sold separately.

Configurazione e installazione

Before beginning installation, ensure power is turned off at the circuit breaker to prevent electric shock. This kit is designed for DIY-friendly 3-way installations, allowing you to add a second switch location without running new wires.

Precauzioni di sicurezza:

• AVVERTENZA: RISCHIO DI SCOSSA. Può provocare lesioni gravi o morte. Spegnere l'alimentazione tramite l'interruttore o il fusibile prima dell'installazione.

Fasi di installazione:

1. Spegni l'alimentazione: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify power is off using a voltagetester.
2. Rimuovere l'interruttore esistente: Carefully remove the wallplate and mounting screws from the existing switch. Gently pull the switch away from the wall box.
3. Identificare i fili:
   • Identify the ground wire (bare copper or green wire).
   • Identify the common wire (connected to a screw of a different color, not green, or labeled "common"). Tag questo filo con nastro isolante per una facile identificazione.
   • Note the remaining traveler wires.
4. Scollegare i fili: Disconnect all wires from the existing switch by loosening screws and unhooking wires.
5. Install Caseta Dimmer (Location 1):
   • Connect the green dimmer wire to the bare copper or green ground wire in the wall box using a wire connector.
   • Connect one of the remaining dimmer wires to the tagged common wire using a second wire connector.
   • Connect the last dimmer wire to both remaining wall box wires (travelers) using a third wire connector.
   • Carefully tuck all wires back into the wall box.
   • Align the Caseta wireless dimmer with the wall box and mount it using the screws provided with the dimmer.
6. Install Pico Remote (Location 2):
   • At the second switch location, remove the existing switch and disconnect all wires. Cap off all wires in the wall box using wire connectors.
   • Remove the plastic insert from the back of the Pico remote control.
   • Slide the Pico remote control onto the wallplate bracket.
   • Secure the wallplate bracket to the wall box by inserting the provided mounting screws through the holes in the bracket and into the wall box.

Image: Kit components including the Caseta Smart Dimmer Switch, Pico Remote, and Pico Wallplate Bracket.

Istruzioni per l'uso

Once installed, the Lutron Caseta dimmer and Pico remote offer intuitive control over your lighting.

Caseta Smart Dimmer Operation:

Immagine: dettagliata view of the Caseta Smart Dimmer, highlighting its buttons and their functions.

• Pulsante in alto: Turns lights ON to full brightness.
• Frecce su/giù: Tap to dim or brighten lights incrementally.
• LED: Indica il livello di luminosità attuale.
• Pulsante in basso: Spegne le luci.
• Optimal Dimming Range: Can be set with button press programming (refer to advanced settings in the full user guide).

Pico Wireless Remote Operation:

Immagine: dettagliata view of the Pico Wireless Remote, highlighting its buttons and their functions.

• Pulsante in alto: Turns lights ON.
• Frecce su/giù: Tap to dim or brighten lights.
• Pulsante centrale: Define a favorite light level; tap to activate.
• Pulsante in basso: Spegne le luci.
• Indicatore LED: Flashes when a button is pressed.

Pairing Pico Remote with Dimmer:

To pair the Pico remote control with the in-wall dimmer:

1. Press and hold the OFF button on the in-wall dimmer for 6 seconds until the LEDs on the dimmer start blinking.
2. While the dimmer LEDs are blinking, press and hold the OFF button on the Pico remote control for 6 seconds until the light you are controlling flashes three times.
3. The Pico remote is now paired and can control the dimmer from its mounted location or as a handheld remote.

Image: Illustration of a 3-way lighting setup, demonstrating how the Caseta Smart Dimmer and Wireless Pico Paddle Remote work together to control lights from two locations.

The Pico remote has a 10-year typical battery life.

Smart Home Integration (with Smart Hub):

For expanded control and smart home features, connect your Caseta devices to the Lutron Caseta Smart Hub (L-BDG2-WH, sold separately). This unlocks advanced functionalities:

• Smartphone/App Control
• Voice Control (Works with Alexa, Apple HomeKit, Google Home, Ring, Sonos, and more)
• Schedules (e.g., turn lights on at sunset)
• Scenes (custom lighting presets)
• Smart Away (randomly turns lights on/off when you're away)
• Multi-Home Control
• Thermostat Integration
• Integrazione musicale
• Timer per il conto alla rovescia

Image: Visual representation of the various benefits and integrations offered by the Lutron Hub, including app control, voice control, and scheduling.

Manutenzione

The Lutron Caseta dimmer and Pico remote are designed for reliable, long-term performance with minimal maintenance.

• Pulizia: Clean the dimmer and remote surfaces with a soft, damp panno. Evitare l'uso di detergenti abrasivi, solventi o prodotti chimici aggressivi, poiché possono danneggiare la finitura.
• Sostituzione della batteria (telecomando Pico): The Pico remote uses a standard coin-cell battery (CR2032). If the remote's indicator LED does not light up when a button is pressed, or if control becomes unreliable, replace the battery. To replace, gently pry open the back cover of the remote.
• Aggiornamenti del firmware: If using with a Lutron Caseta Smart Hub, ensure your system's firmware is kept up-to-date through the Lutron app for optimal performance and security.

Risoluzione dei problemi

Se riscontri problemi con il tuo sistema Lutron Caseta, prova a seguire i seguenti passaggi per la risoluzione dei problemi:

Specifiche

Garanzia e supporto

Lutron products are UL Listed and 100 percent end of line tested before they ship, ensuring quality and reliability.

Per informazioni dettagliate sulla garanzia, fare riferimento al documento ufficiale sulla garanzia:

Lutron Caseta Warranty (PDF)

For additional support, installation walkthroughs, and technical assistance, you can contact Lutron directly:

• Supporto tecnico: 1-800-LUTRON1 (available 24/7)
• Guida utente online: Lutron Caseta User Guide (PDF)
• Visit the Lutron Store: Lutron Amazon Store