1. Introduzione
Thank you for choosing the Artemide Tolomeo Table Lamp Micro. This manual provides essential information for the safe and efficient use of your new lamp. The Tolomeo Micro is designed with a fully adjustable, articulated anodized aluminum arm and body, featuring die-cast aluminum joints and tension control knobs for precise positioning. Its monochromatic matte finish complements various interior styles.
Si prega di leggere attentamente il presente manuale prima dell'installazione e dell'uso e di conservarlo per riferimento futuro.
2. Informazioni sulla sicurezza
Observe the following safety precautions to prevent injury or damage to the lamp:
- Garantire l'alimentazione voltage corrisponde alla lamp's requirements (120V).
- Scollegare sempre lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- Non superare il limite massimo di wattage specified for the bulb (100W max). Use only E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamps.
- Avoid touching the bulb directly after use, as it may be hot.
- Non azionare il lamp con un cavo o una spina danneggiati. In caso di danni, contattare personale di assistenza qualificato.
- Mantieni la lamp away from water or other liquids. Do not use in damp o luoghi umidi.
- Assicurare lamp la base è posizionata su una superficie stabile e piana per evitare il ribaltamento.
- Questo lamp è progettato esclusivamente per uso interno.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti nella confezione:
- Artemide Tolomeo Table Lamp Micro (Articulated Arm, Head, Base)
- Cavo di alimentazione
- Lampadina non inclusa.
4. Impostazione
4.1 Disimballaggio e posizionamento
Carefully remove all components from the packaging. Place the lamp base on a flat, stable surface. Ensure there is sufficient space for the articulated arm to extend and adjust without obstruction.
Image: Two Artemide Tolomeo Table Lamps, illustrating the adjustable arm and stable base design.
4.2 Installazione della lampadina
- Assicurare lamp è scollegato dalla presa di corrente.
- Gently unscrew the lamp head to access the bulb socket.
- Insert an E26 (medium base) A19 compatible bulb, ensuring it does not exceed 100W.
- Al diavolo la lamp head back into place securely.
Immagine: Primo piano della lamp head, indicating the area for bulb installation.
4.3 Collegamento di alimentazione
Plug the power cable into a standard 120V electrical outlet. Ensure the cable is not pinched or routed in a way that could cause a tripping hazard.
5. Istruzioni per l'uso
5.1 Accensione/Spegnimento
The Artemide Tolomeo Table Lamp Micro features a touch switch for convenient operation. Locate the touch-sensitive area on the lamp (typically on the base or head, refer to product specifics if available). A single touch will turn the lamp acceso o spento.
5.2 Regolazione della Lamp
Il lamp's articulated arm and head offer extensive adjustability:
- Regolazione del braccio: Gently move the articulated aluminum arm to position the light source as desired. The tension control knobs at the joints allow for smooth movement and stable positioning.
- Rotazione dell'ombra: Il lamp head can rotate 360 degrees, allowing you to direct light precisely where needed.
Image: Artemide Tolomeo Table Lamps in an extended position, highlighting the adjustable arm functionality.
6. Manutenzione
6.1 Pulizia
Scollegare sempre la lamp prima della pulizia.
- Wipe the aluminum surfaces with a soft, dry cloth.
- Per i segni ostinati, utilizzare una punta leggermenteamp cloth with a mild, non-abrasive cleaner. Dry immediately.
- Non utilizzare prodotti chimici aggressivi, detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura.
6.2 Sostituzione della lampadina
Refer to section 4.2 for detailed bulb installation instructions. Ensure the lamp sia scollegato e che la lampadina si sia raffreddata prima di tentare di sostituirla.
6.3 Regolazione della tensione
If the articulated arm feels too loose or too stiff, the tension control knobs at the joints can be adjusted. Turn them clockwise to increase tension or counter-clockwise to decrease tension, finding a comfortable balance for movement and stability.
7. Risoluzione Dei Problemi
Se riscontri problemi con il tuo lamp, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Lamp non si accende. |
|
|
| Sfarfallio di luce. |
|
|
| Il braccio non mantiene la posizione. |
|
|
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Artemide |
| Modello | Tolomeo Table Lamp Micro |
| Numero di parte | 784862011120 |
| Dimensions (Max) | 50.81"P x 30.75"L x 17.52"A |
| Peso dell'articolo | 3 libbre |
| Materiale | Cast Aluminum, Metal |
| Tipo di finitura | Finitura opaca |
| Base della lampadina | E26 (Base media) |
| Max Wattage | 100 Watt |
| Tipo di sorgente luminosa | CFL, Incandescent, LED compatible |
| Tipo di interruttore | Tocco |
| Caratteristica speciale | Adjustable Arm, 360-degree Shade Rotation |
| Fonte di alimentazione | Elettrico con cavo |
| Uso interno/esterno | Al chiuso |
9. Garanzia e supporto
Artemide products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Artemide websito.
For technical support, replacement parts, or any inquiries not covered in this manual, please contact Artemide customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's websito.