Manuale di istruzioni per l'altoparlante compatto amplificato QSC CP8 da 8 pollici

1. Introduzione

The QSC CP8 8-Inch Compact Powered Loudspeaker is designed for high performance, superior quality, and lasting reliability. This ultra-compact and highly portable loudspeaker features a 1000-Watt peak power Class-D amplifier module, matching transducers, and advanced DSP for exceptional sound quality. It is suitable for various applications including main PA, stage monitor, or instrument amplificazione.

2. Caratteristiche principali

• Compact and powerful performance; Light weight and highly portable.
• 1000 Watt peak power Class-D ampmodulo lificatore.
• Easily selected contours for commonly-used applications.
• Advanced DSP with Intrinsic Correction for superior sound quality and speaker protection.
• Directivity Matched Transition (DMT) for consistent frequency response across the entire coverage area.
• Professional appearance looks great in any application.
• Use for main PA, stage monitor, or instrument amplifier with the option to elevate the speaker via the 35 mm pole socket.

3. Impostazione

Before operating your QSC CP8 loudspeaker, ensure it is placed on a stable surface or mounted securely. The speaker can be used in various orientations: floor standing, as a stage monitor, or mounted on a speaker pole.

Figura 1: Fronte view of the QSC CP8 loudspeaker, showcasingrazie al suo design compatto e alla griglia protettiva.

Figure 2: Rear panel of the QSC CP8 loudspeaker, detailing the input/output connections, gain controls, and DSP contour settings.

3.1 Collegamento dell'alimentazione

1. Assicurarsi che l'interruttore di alimentazione sul pannello posteriore sia in posizione "OFF".
2. Connect the provided power cord to the AC inlet on the rear panel.
3. Collegare l'altra estremità del cavo di alimentazione a una presa di corrente CA adatta.

3.2 Collegamenti audio

1. Connect your audio source (mixer, microphone, instrument, etc.) to the 'MIC/LINE' or 'LINE' input jacks on the rear panel.
2. Use the 'MIX OUT' XLR connector to send a mixed signal to another CP8 loudspeaker or a subwoofer.

4. Istruzioni per l'uso

4.1 Accensione/Spegnimento

1. To power on, flip the power switch on the rear panel to the 'ON' position. The power LED on the front of the speaker will illuminate.
2. Per spegnere, portare l'interruttore di alimentazione in posizione "OFF".

4.2 Adjusting Volume and Gain

• Use the 'GAIN A+B' and 'GAIN C' knobs on the rear panel to adjust the input level for each channel. Start with the gain set low and gradually increase it to avoid distortion.
• The 'LIMITER' LED indicates when the internal limiter is active. Reduce the input gain if this LED is frequently lit.

4.3 DSP Contours

The CP8 features selectable DSP contours to optimize sound for different applications:

• PREDEFINITO: General purpose setting.
• BALLARE: Enhanced bass response for music playback.
• SOTTOTITOLI ESTERNI: Optimized for use with an external subwoofer.
• MONITOR DA PAVIMENTO: Reduces low-frequency build-up for stage monitoraggio.
• DISCORSO: Migliora la chiarezza vocale.

Select the appropriate contour using the switch on the rear panel.

4.4 Connettività Bluetooth

The QSC CP8 supports Bluetooth for wireless audio streaming. Refer to the detailed instructions in the full user manual for pairing procedures with your device.

5. Manutenzione

• Pulizia: Use a soft, dry cloth to clean the exterior of the loudspeaker. Avoid using abrasive cleaners or solvents.
• Magazzinaggio: Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Gestione: Always use the integrated handles when moving the loudspeaker. Avoid dropping or subjecting the unit to severe impacts.

6. Risoluzione Dei Problemi

• Nessun suono: Check all power and audio connections. Ensure the gain controls are set appropriately and the audio source is active. Verify the correct DSP contour is selected.
• Suono distorto: Reduce the input gain. If the 'LIMITER' LED is constantly lit, the input signal is too high. Check the audio source for distortion.
• Problemi di alimentazione: Assicurarsi che il cavo di alimentazione sia collegato saldamente e che la presa di corrente funzioni.

7. Specifiche

8. Cosa c'è nella scatola

• QSC CP8 8-Inch Compact Powered Loudspeaker
• Manuale d'uso
• Cavo di alimentazione

9. Garanzia e supporto

The QSC CP8 8-Inch Compact Powered Loudspeaker is protected by a global 3-year warranty with product registration. For detailed warranty information, technical support, or service inquiries, please visit the official QSC websito o contattare il loro servizio clienti.

Per ulteriori risorse e informazioni sul prodotto, visitare il sito Negozio QSC su Amazon.