Monoprice 133833 Immersive Satellite Speakers User Manual

1. Introduzione

Grazie per l'acquistoasing the Monoprice 133833 Immersive Satellite Speakers. These speakers are designed to enhance your home cinema experience by providing multi-dimensional sound, fully compatible with standard and Dolby Atmos receivers. This manual provides essential information for the safe and optimal use of your new speakers.

2. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di utilizzare questo prodotto. Conservare il presente manuale per riferimento futuro.

• Sicurezza elettrica: Do not expose the speakers to water or moisture. Ensure all connections are secure before powering on your audio system.
• Posizionamento: Place speakers on a stable, level surface to prevent tipping. Avoid placing near heat sources or in direct sunlight.
• Ventilazione: Ensure adequate airflow around the speakers. Do not block ventilation openings.
• Pulizia: Scollegare l'alimentazione prima di pulire. Utilizzare un panno morbido e asciutto. Non utilizzare detergenti liquidi o spray.
• Manutenzione: Non tentare di riparare questo prodotto da soli. Affidare qualsiasi intervento di assistenza a personale qualificato.
• Livelli del volume: L'esposizione prolungata a livelli di volume elevati può causare danni permanenti all'udito. Prestare attenzione quando si regola il volume.

3. Contenuto della confezione

Please ensure all items are present and in good condition. If any items are missing or damaged, contact Monoprice customer support.

• 2x Monoprice 133833 Immersive Satellite Speakers
• 1x Manuale utente (questo documento)

4. Caratteristiche del prodotto

The Monoprice 133833 speakers are designed with advanced features for an enhanced audio experience:

• Suono coinvolgente: Upward-firing drivers project sound towards the ceiling, which then reflects down into the listening area, creating a 3D audio space. This design is fully compatible with Dolby Atmos enabled receivers and audio tracks.
• Dimensioni compatte: Each speaker measures approximately 11.4 x 26.7 x 13.5 cm (4.5 x 10.5 x 5.3 inches) and weighs about 2.26 kg (5 lbs), making them suitable for various room setups.
• Driver di alta qualità: Features a 3/4-inch aluminum dome tweeter and a 3-inch polypropylene woofer for clear highs and rich lows. An additional 3-inch polypropylene driver is used for the immersive height channel.
• Gestione della potenza: Capable of handling up to 100 watts of input power.
• Connettività: Equipped with binding post connectors for secure and reliable speaker wire connections.

Figura 4.1: Fronte view of a Monoprice 133833 Immersive Satellite Speaker, showing the main drivers and the upward-firing driver on top.

5. Impostazione

5.1 Posizionamento degli altoparlanti

For optimal immersive sound, place the speakers on top of your front left and right main speakers, or on a stable surface at the front of your listening area. Ensure the upward-firing drivers are unobstructed and facing the ceiling. The ceiling should be flat and reflective for the best effect.

Figure 5.1: A pair of Monoprice 133833 Immersive Satellite Speakers, designed for placement on existing speakers or stands.

5.2 Collegamento degli altoparlanti

These speakers connect to your AV receiver's height channels (e.g., Front Height, Top Front, or Dolby Atmos Enabled Speaker outputs) using standard speaker wire. Each speaker features two sets of binding posts: one for the main drivers and one for the upward-firing immersive driver.

1. Identify the speaker wire terminals on your AV receiver for the height channels.
2. Prepare your speaker wires by stripping approximately 1/2 inch (1.2 cm) of insulation from the ends.
3. Connect the positive (+) terminal of the speaker to the positive (+) terminal of the corresponding height channel on your receiver.
4. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the corresponding height channel on your receiver.
5. Ensure all connections are tight and that there are no stray wire strands that could cause a short circuit.

Figure 5.2: Rear panel of the speaker, illustrating the dual binding post connections for the main and immersive drivers.

Note on Impedance: The speakers have an impedance of 8 Ohms. Ensure your receiver is compatible with this impedance. If your receiver has settings for speaker impedance, select the appropriate setting.

6. Istruzioni per l'uso

Once connected, operate the speakers through your AV receiver. Refer to your receiver's manual for specific instructions on configuring height channels and Dolby Atmos settings.

• Configurazione del ricevitore: Access your AV receiver's setup menu. Configure the speaker setup to include "Dolby Atmos Enabled Speakers" or "Front Height" speakers, depending on your receiver's options.
• Calibrazione: Use your receiver's automatic room calibration system (e.g., Audyssey, MCACC, YPAO) to optimize sound levels and delays for your listening environment.
• Source Material: For the full immersive experience, use audio content encoded with Dolby Atmos or DTS:X. The speakers will also enhance standard surround sound formats.

7. Manutenzione

Questi altoparlanti richiedono una manutenzione minima per garantire prestazioni durature.

• Pulizia: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
• griglie: Se necessario, è possibile rimuovere con cautela le griglie degli altoparlanti per pulirle. Utilizzare una spazzola morbida o un aspirapolvere con spazzola per rimuovere la polvere.
• Ambiente: Avoid exposing the speakers to extreme temperatures, humidity, or direct sunlight, which can degrade materials over time.

Figura 7.1: lato view of the speaker with its protective grille installed.

8. Risoluzione Dei Problemi

If you experience issues with your speakers, refer to the following troubleshooting guide:

9. Specifiche

Detailed technical specifications for the Monoprice 133833 Immersive Satellite Speakers:

10. Garanzia e supporto

Monoprice stands behind its products with comprehensive warranty and support services.

• Garanzia di sostituzione di 1 anni: This product is covered by a 1-year replacement warranty from the date of purchase.
• Garanzia soddisfatti o rimborsati entro 30 giorni: If you are not completely satisfied with your purchase, you may return it within 30 days for a full refund.
• Assistenza clienti: For technical assistance, warranty claims, or other inquiries, please visit the official Monoprice websito o contattare il loro servizio clienti.