Introduzione
This manual provides comprehensive instructions for the YUNTENG YT-1288 Selfie Stick. This portable and extendable monopod is designed for smartphones and cameras, featuring an adjustable holder, a detachable Bluetooth remote control, and a 180-degree adjustable ball head for versatile shooting angles. It is an ideal tool for capturing self-portraits and group photos from various perspectives.
Contenuto della confezione
- YUNTENG YT-1288 Selfie Stick
- Telecomando Bluetooth staccabile
- Supporto per telefono regolabile
Impostare
1. Collegamento del dispositivo
The adjustable phone holder is compatible with most smartphones. Gently expand the holder and securely place your smartphone or camera with a 1/4 inch screw into the clamp. Ensure your device is firmly seated before use.

Image: The YUNTENG YT-1288 Selfie Stick with a smartphone securely mounted in the adjustable holder.
2. Associazione del telecomando Bluetooth
- Ensure the detachable Bluetooth remote control is charged (if applicable) and powered on.
- Sul tuo smartphone, vai alle impostazioni Bluetooth.
- Cercare available devices and select "YUNTENG" or "YT-1288" to pair.
- Una volta associato, il telecomando è pronto per l'uso.
Istruzioni per l'uso
1. Extending and Retracting the Monopod
To extend the selfie stick, unlock the sections by twisting them counter-clockwise, pull to the desired length (up to 125 cm), and then twist clockwise to lock them in place. To retract, reverse the process.
2. Regolazione dell'angolazione
The selfie stick features an adjustable ball head. Loosen the tightening screw near the phone holder to adjust your device to the desired angle (up to 180 degrees). Tighten the screw to secure the position.
Video: This demonstration shows how to extend the selfie stick, adjust the phone holder for 180-degree shooting, and detach the Bluetooth remote control.
3. Utilizzo del telecomando Bluetooth
Once paired, press the button on the detachable Bluetooth remote control to capture photos or start/stop video recording.
4. Using the Built-in Mirror
The integrated mirror assists in framing your shots when using the rear camera of your smartphone for higher quality selfies.
Manutenzione
- Keep the selfie stick clean and dry. Wipe with a soft, damp panno se necessario.
- Evitare di esporre il dispositivo a temperature estreme o alla luce solare diretta per periodi prolungati.
- Quando non lo usi, conserva il selfie stick in un luogo fresco e asciutto.
- Periodically check all screws and locking mechanisms to ensure they are secure.
Risoluzione dei problemi
Il telecomando non si associa
- Ensure the remote control has sufficient battery power.
- Assicurati che il Bluetooth sia attivato sul tuo smartphone.
- Prova a disaccoppiare e riassociare il dispositivo nelle impostazioni Bluetooth del telefono.
- Restart your smartphone and the remote control.
Phone Not Holding Securely
- Ensure the phone holder is fully expanded and your device is centered.
- Verify that the tightening screw for the ball head is securely fastened.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello | YUNTENG 1288 |
| Colore | Nero |
| Dispositivi compatibili | Telefono cellulare |
| Dimensioni piegate | 18 centimetri |
| Lunghezza massima | 125 centimetri |
| Tipo di controllo | Telecomando Bluetooth |
| Testa regolabile | 180-degree ball head |
| Resistenza all'acqua | Non resistente all'acqua |
| Modalità di scatto | Selfie, Portrait |
| Controllo dell'esposizione | Automatico |
| Registrazione audio | NO |
Garanzia e supporto
This product comes without a warranty as per manufacturer specifications. For any operational issues or inquiries, please refer to the troubleshooting section or contact your retailer for further assistance.