Wayne Dalton 372310 Garage Door Remote 3973C 372MHz 3 Button Instruction Manual

1. Introduzione

This manual provides instructions for the Wayne Dalton 372310 (Model 3973C) 3-button garage door remote control. This remote operates on a 372 MHz frequency and is designed for use with compatible Wayne Dalton garage door opener systems. Please read these instructions carefully before attempting to set up or operate your new remote control.

2. Compatibilità

The Wayne Dalton 372310 (3973C) remote control is compatible with Wayne Dalton garage door opener models that operate on a Frequenza 372 MHz. This includes, but is not limited to, the following models:

• Wayne Dalton Classic Drive: 3014, 3018, 3018DLX, 3514, 3522, 3522DLX
• Wayne Dalton Quantum: 3214, 3314, 3316, 3414
• Wayne Dalton iDrive: All models 3660-372, 3661-372, 3662-372, 3663-372, 3760-372, 3751-372, 3651-372, 3750-372, 3790-372, 3790-Z
• Wayne Dalton Prodrive: 3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B, 3220C-Z, 3221C-Z, 3222C-Z, 3224C-Z, 3320B-Z, 3322B-Z, 3324B-Z
• Wayne Dalton Doormaster: BDOR-2000 models using 372 Mhz with a yellow antenna wire

Please verify your existing garage door opener's frequency and model number to ensure compatibility.

3. Configurazione e programmazione

To program your new Wayne Dalton 372310 remote control to your garage door opener, follow these steps:

1. Individua il pulsante Impara: On your Wayne Dalton garage door opener motor head unit, locate the "Learn" button. The location may vary depending on your specific opener model. Refer to your garage door opener's manual if you cannot find it.
2. Attiva la modalità di apprendimento: Press and immediately release the "Learn" button on the garage door opener. The indicator light on the opener should illuminate, signaling that the opener is in programming mode. You typically have about 30 seconds to complete the next step.
3. Programmare il telecomando: Within the 30-second window, press and hold the desired button on your new Wayne Dalton 372310 remote control.
4. Conferma programmazione: Release the remote button once the garage door opener's light flashes or the opener activates (moves the door). This indicates successful programming.
5. Prova il telecomando: Press the programmed button on your remote control to ensure it operates the garage door correctly.

This image shows the front of the remote control with its three distinct buttons for operation.

If the remote does not work after following these steps, repeat the process. Ensure you are within range of the opener when programming.

4. Utilizzo del telecomando

Once programmed, operating your Wayne Dalton 372310 remote control is straightforward:

• Apertura/Chiusura della Porta: Press the programmed button on the remote control once. The garage door will begin to open or close.
• Fermare la porta: Premere nuovamente il pulsante programmato mentre la porta è in movimento per fermarla.
• Inversione della porta: If the door is stopped mid-cycle, pressing the button again will reverse its direction.

Ensure a clear line of sight between the remote and the garage door opener for optimal performance. Avoid pressing the button multiple times rapidly, as this may confuse the opener's signal.

5. Maintenance and Battery Replacement

The Wayne Dalton 372310 remote control requires a battery for operation. If the remote's range decreases or it stops responding, the battery may need replacement.

Passaggi per la sostituzione della batteria:

1. Aprire il C remotoasing: Carefully locate the seam on the remote control casing. Use a small flathead screwdriver or a coin to gently pry open the two halves of the remote.
2. Identificare il tipo di batteria: Note the type and orientation of the existing battery. The remote typically uses a 12V A23 battery or similar.
3. Rimuovere la vecchia batteria: Rimuovere con attenzione la vecchia batteria dal suo vano.
4. Inserire una nuova batteria: Insert a new battery of the same type, ensuring the positive (+) and negative (-) terminals are correctly aligned as indicated in the battery compartment.
5. Chiudi la Casing: Allineare le due metà del telecomando casing e premerli saldamente insieme finché non scattano saldamente in posizione.

This image displays the internal components of the remote, highlighting the battery compartment where the battery is installed.

Smaltire le vecchie batterie in modo responsabile secondo le normative locali.

6. Risoluzione Dei Problemi

Se riscontri problemi con il telecomando, consulta la seguente guida alla risoluzione dei problemi:

7. Specifiche

• Modello: 3973C
• Numero parte: 372310 (also known as 300643, 312962, 3BTM, 3BTM-0372, 3BTM-0372U, 3BTM-0372F, 3BTM-0372A, 327310, 302083)
• Frequenza: 372 MHz
• Pulsanti: 3
• Tipo di batteria: 12V A23 (or equivalent)
• Produttore: 3973C

The back of the remote control, featuring the belt clip and identification labels including the model number 3973C.

8. Informazioni sulla garanzia

This product is typically covered by a manufacturer's limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary. Please refer to the original product packaging or contact the seller/manufacturer for specific warranty details. Keep your purchase receipt as proof of purchase.

9. Assistenza clienti

For further assistance, technical support, or to inquire about replacement parts, please contact the retailer or the manufacturer directly. Have your product model number (3973C) and purchase information ready when contacting support.