Flamaker 4-Piece Outdoor Patio Bistro Set

Informazioni importanti sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni prima del montaggio e dell'uso. Conservare il manuale per riferimento futuro.

• Do not exceed the maximum weight capacity of 330 pounds per seating unit.
• Exercise caution around sharp edges during the assembly process.
• This furniture is not heat-resistant. Avoid placing hot items directly on surfaces without protection.
• Assicurarsi che tutti i bulloni e le viti siano ben serrati prima dell'uso. Controllare periodicamente e serrare nuovamente se necessario.
• Posizionare i mobili su una superficie piana e stabile per evitare che si ribaltino.

Contenuto della confezione

Verificare che tutti i componenti elencati di seguito siano presenti prima di iniziare il montaggio. Se qualche componente risulta mancante o danneggiato, contattare l'assistenza clienti.

Immagine: Oltreview of all components and hardware for assembly.

Elenco dei componenti:

• 1 x Loveseat Frame
• 2 x Single Chair Frames
• 1 x struttura per tavolino da caffè
• 1 x piano in vetro temperato
• Textilene Fabric for Loveseat Seat and Back
• Textilene Fabric for Single Chair Seats and Backs (2 sets)

Elenco hardware:

• Bulloni (varie dimensioni)
• Rondelle
• Noci
• Allen Wrench (Assembly Tool)
• Suction Cups for Glass Tabletop
• Screw Full Covers

Istruzioni di montaggio

Follow these steps carefully to assemble your Flamaker 4-Piece Outdoor Patio Bistro Set. It is recommended to assemble on a soft, clean surface to prevent scratches.

Step 1: Assemble the Single Chairs

1. Attach the backrest frame to the seat frame using the provided bolts and washers. Do not fully tighten yet.
2. Connect the armrests to the assembled seat and backrest. Ensure all holes align.
3. Once all components are loosely connected, place the chair on a flat surface and gradually tighten all bolts evenly.
4. Install the screw full covers over exposed bolt heads for a finished look and protection.

Image: Step-by-step assembly for a single chair.

Step 2: Assemble the Loveseat

1. Attach the two backrest sections to the loveseat seat frame using the appropriate bolts and washers.
2. Connect the side armrest frames to the main loveseat structure.
3. Ensure all parts are aligned, then place the loveseat on a flat surface and tighten all bolts securely and evenly.
4. Apply screw full covers to all exposed bolt heads.

Image: Step-by-step assembly for the loveseat.

Fase 3: assemblare il tavolino da caffè

1. Attach the four legs to the table frame using the provided hardware. Do not fully tighten.
2. Ensure the frame is stable and level, then tighten all bolts.
3. Place the suction cups into the designated holes on the table frame.
4. Carefully place the tempered glass tabletop onto the suction cups, ensuring it is centered and secure.

Image: Step-by-step assembly for the coffee table.

Cura e manutenzione

Proper care will extend the life and appearance of your patio set.

• Pulizia: Cancella con pubblicitàamp cloth for general cleaning. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
• Tessuto in textilene: The breathable Textilene material is easy to clean. Simply wipe it down with a damp stoffa.
• Powder-Coated Steel Frame: The powder-coated finish helps resist rust. Clean with a damp panno. Evitare detergenti abrasivi o prodotti chimici aggressivi che potrebbero danneggiare la finitura.
• Piano in vetro: Pulire con un normale detergente per vetri e un panno morbido.
• Stoccaggio stagionale: During harsh weather conditions (heavy rain, snow, extreme cold), it is recommended to store the furniture indoors or cover it with a protective outdoor furniture cover to prevent damage and prolong its lifespan.
• Ispezione regolare: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability and safety.

Risoluzione dei problemi

Se si verificano problemi durante il montaggio o l'uso, fare riferimento alle seguenti soluzioni comuni:

• Tavolo/sedie traballanti: Ensure all bolts are fully and evenly tightened. Sometimes, loosening all bolts slightly, placing the furniture on a flat surface, and then tightening them in a cross-pattern can help level the unit. Check that all protective feet are properly installed.
• Difficoltà nell'allineamento dei fori: Do not fully tighten any bolts until all components are loosely assembled. This allows for minor adjustments. If a hole is severely misaligned, check if a part is oriented incorrectly.
• Parti mancanti o danneggiate: If any parts are missing or damaged upon arrival, do not proceed with assembly. Contact Flamaker customer support immediately for assistance.
• Graffi sul pavimento: The chairs feature a bending design for easy movement. Ensure you lift the chairs rather than dragging them to prevent scratches on your floor or patio surface.

Specifiche

Image: Dimensions of the Flamaker 4-Piece Outdoor Patio Bistro Set components.

Garanzia e supporto

For warranty information, please refer to the documentation included with your product packaging or contact Flamaker customer support directly. Flamaker offers various protection plans for extended coverage, which can be found on the product's purchase page.

If you require assistance with assembly, missing parts, or have any questions regarding your Flamaker 4-Piece Outdoor Patio Bistro Set, please contact Flamaker customer service. You can often find contact details on the manufacturer's websito o tramite il tuo rivenditore.

For additional product information and to explore other Flamaker products, visit the official Flamaker Store online.