1. Introduzione
This manual provides essential information for the safe installation, operation, and maintenance of your ET2 E42016-90BRZ LED Round Mirror. This mirror features an anodized bronze finish and integrated LED lighting, designed to enhance various interior spaces. Please read this manual thoroughly before proceeding with installation or use.
Immagine 1.1: anteriore view of the ET2 E42016-90BRZ LED Round Mirror with anodized bronze finish and illuminated LED edge.
2. Informazioni sulla sicurezza
AVVERTIMENTO: Per ridurre il rischio di scosse elettriche, incendi o lesioni personali, leggere e seguire attentamente tutte le istruzioni.
- Prima di procedere all'installazione o alla manutenzione, scollegare sempre l'alimentazione dall'interruttore principale.
- L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutte le normative elettriche locali.
- Do not install this product in areas with excessive moisture or direct water exposure unless specifically rated for such environments.
- Handle the mirror with care to prevent breakage. Wear appropriate safety gear, such as gloves and eye protection, during installation.
- Assicurarsi che la superficie di montaggio sia strutturalmente solida e in grado di sostenere il peso dello specchio (circa 16.36 libbre).
- Do not attempt to modify or disassemble the LED components. There are no user-serviceable parts inside.
3. Contenuto della confezione
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact customer support immediately.
- 1 x ET2 E42016-90BRZ LED Round Mirror
- 1 x Installation Hardware Kit (screws, anchors, mounting bracket)
- 1 x Manuale utente (questo documento)
4. Configurazione e installazione
This mirror is designed for wall-mounted installation and can be oriented horizontally or vertically. Professional installation is recommended due to electrical wiring requirements.
4.1 Strumenti necessari (non inclusi)
- Cacciavite con testa a croce
- Forare con punte adeguate
- Livello
- Nastro di misurazione
- Matita
- Spellafili
- Nastro isolante
4.2 Passaggi di installazione
- Spegni l'alimentazione: Locate the circuit breaker controlling the desired installation location and turn off the power. Verify power is off using a voltagetester.
- Determinare la posizione di montaggio: Choose a suitable location on the wall. Consider the mirror's dimensions (27.5"L x 27.5"W) and ensure there is adequate space and a power source.
- Segna punti di montaggio: Hold the mounting bracket against the wall at the desired height and use a level to ensure it is straight. Mark the screw hole locations with a pencil.
- Fori di perforazione: Drill pilot holes at the marked locations. Insert wall anchors if necessary (for drywall installation).
- Fissare la staffa di montaggio: Fissare la staffa di montaggio alla parete utilizzando le viti in dotazione. Assicurarsi che sia saldamente fissata.
- Collegamento elettrico: Carefully connect the mirror's electrical wires to the household wiring. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Use wire nuts and electrical tape to secure connections. Ensure all connections are tight and properly insulated.
- Montare lo specchio: Carefully lift the mirror and align its mounting points with the bracket. Secure the mirror to the bracket according to the specific design (e.g., sliding it onto the bracket, or securing with additional screws).
- Ripristina alimentazione: Once the mirror is securely mounted and all electrical connections are complete, restore power at the circuit breaker.
Image 4.1: Dimensional diagram of the mirror, indicating a 27.5-inch diameter and 1.5-inch depth.
5. Istruzioni per l'uso
The ET2 E42016-90BRZ LED Round Mirror features integrated LED lighting with adjustable brightness and color temperature. A touch sensor is typically located on the mirror surface for control.
5.1 Accensione/spegnimento
Locate the touch sensor icon on the mirror surface. A single tap will typically turn the LED lighting on or off.
5.2 Regolazione della luminosità e della temperatura del colore
If the mirror supports adjustable brightness and color temperature, these functions are usually controlled via the same touch sensor or a series of taps/holds:
- Luminosità: Press and hold the touch sensor to cycle through brightness levels. Release when the desired brightness is achieved.
- Temperatura del colore: Multiple taps on the touch sensor may cycle through different color temperature settings (e.g., warm white, neutral white, cool white). Refer to the specific functionality of your mirror model.
The mirror's LED provides 1540 lumens of light with a color temperature of 3000 Kelvin, ensuring clear and vibrant illumination.
6. Manutenzione
Proper care will ensure the longevity and appearance of your LED mirror.
6.1 Pulizia della superficie dello specchio
- Utilizzare un panno morbido e privo di lanugine e un detergente per vetri non abrasivo.
- Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the electrical components.
- Wipe the mirror surface gently until clean and streak-free.
6.2 Pulizia del telaio
- Wipe the anodized bronze frame with a soft, dry, or slightly damp stoffa.
- Evitare l'uso di prodotti chimici aggressivi, detergenti abrasivi o pagliette, poiché potrebbero danneggiare la finitura.
6.3 LED Longevity
The integrated LED lighting has a rated life of 50,000 hours and does not require bulb replacement. If the LED lighting malfunctions, contact customer support.
7. Risoluzione Dei Problemi
If you encounter issues with your ET2 LED mirror, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Le luci LED non si accendono. | No power supply; loose wiring; faulty touch sensor. | Check circuit breaker. Verify all electrical connections are secure. If problem persists, contact a qualified electrician or customer support. |
| Le luci LED tremolano. | Alimentazione instabile; cablaggio allentato. | Ensure stable power. Check wiring connections. Consult an electrician if flickering continues. |
| Il sensore touch non risponde. | Mirror surface is dirty; temporary electronic glitch. | Clean the mirror surface around the sensor. Turn off power at the breaker for 5 minutes, then restore to reset. |
| Lo specchio non è montato saldamente. | Installazione impropria. | Review installation steps. Ensure mounting hardware is correctly installed and tightened. Seek professional assistance if needed. |
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | E42016-90BRZ |
| Marca | ET2 |
| Forma | Girare |
| Dimensioni del prodotto | 27.5"L x 27.5"W (Diameter: 27.5 Inches) |
| Profondità | 1.5 pollici |
| Peso dell'articolo | 16.36 libbre |
| Materiale del telaio | Metal (Anodized Bronze Finish) |
| Tipo di montaggio | Montaggio a parete |
| Fonte di alimentazione | Elettrico con cavo |
| Voltage | 120 Volt |
| Cosatage | 22 watt |
| Tipo di lampadina | GUIDATO |
| Flusso luminoso | 1540 lumen |
| Temperatura del colore | 3000 gradi Celsius |
| Indice di resa cromatica (CRI) | 80 |
| Rated LED Life | 50,000 ore |
| Caratteristica speciale | Adjustable (Brightness/Color Temperature) |
| Codice UPC | 845094087519 |
9. Informazioni sulla garanzia
This ET2 LED Round Mirror is covered by a Garanzia del produttore di 5 anni. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please contact ET2 customer support.
10. Assistenza clienti
If you have any questions, require technical assistance, or need to report a problem with your ET2 LED Round Mirror, please contact ET2 customer support through their official website or the retailer from whom you purchased the product. Please have your model number (E42016-90BRZ) and proof of purchase ready when contacting support.