1. Introduzione
The IK Multimedia AXE I/O is a premium 2-in 5-out USB audio interface designed for guitarists and musicians seeking high-quality recording and advanced tone-shaping capabilities. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your AXE I/O interface, ensuring optimal performance and creative workflow.
Figura 1: Fronte view of the IK Multimedia AXE I/O Audio Interface.
2. Informazioni sulla sicurezza
Please read and follow all safety instructions to prevent damage to the device or personal injury.
- Non esporre l'unità a pioggia, umidità o temperature estreme.
- Evitare di posizionare l'unità vicino a fonti di calore o alla luce diretta del sole.
- Utilizzare solo l'alimentatore specificato dal produttore.
- Non aprire l'unità casing; affidare ogni intervento di manutenzione a personale qualificato.
- Tenere l'unità lontana da forti campi elettromagnetici.
3. Contenuto della confezione
Verificare che tutti gli articoli siano presenti nella scatola:
- IK Multimedia AXE I/O Audio Interface
- Cavo da USB-A a USB-C
- External Power Supply (9V DC, 1.7A)
- Registration Card / Quick Start Guide
- Software Bundle Download Instructions (AmpliTube 5 SE, TONEX SE, Ableton Live 10 Lite)
4. Hardware finitoview
4.1 Controlli del pannello frontale
Figura 2: dettagliata view of the AXE I/O front panel controls.
- Input 1 & 2 Gain Knobs: Adjust input level for connected instruments or microphones.
- Z-TONE Control: Continuously variable impedance control for guitar inputs, allowing fine-tuning of tone.
- Active/Passive Pickup Selector: Optimizes input impedance for active or passive guitar pickups.
- JFET/PURE Preamp Interruttore: Selects between a warm JFET preamp or a transparent PURE preamp.
- Pulsante di alimentazione phantom 48V: Attiva l'alimentazione phantom per i microfoni a condensatore.
- Manopola preimpostata: Assignable knob for quick recall of software presets.
- Display sintonizzatore: Integrated guitar tuner.
- Manopola di monitoraggio: Blends direct input signal with DAW playback for zero-latency monitoring.
- Headphones Output & Level Knob: Stereo headphone output with dedicated volume control.
- Manopola del volume principale: Controlla il livello di uscita complessivo dei monitor da studio.
- Amp Fuori: Dedicated output for re-amping through external amplificatori.
4.2 Collegamenti del pannello posteriore
Figura 3: dettagliata view of the AXE I/O rear panel connections.
- Power Switch & DC Input: On/Off switch and connection for the external power supply.
- Ingresso/uscita MIDI: 5-pin DIN connectors for MIDI devices.
- Porta USB 2.0: Collega l'interfaccia al computer.
- External Control Inputs (Switch/Pedal 1 & 2): Connect expression pedals or footswitches for real-time control.
- Line Outputs (1/L, 2/R, 3, 4): Balanced TRS outputs for connecting to studio monitors or other audio equipment.
- Mic/Line Inputs (1 & 2): Combo XLR/TRS inputs for microphones or line-level sources.
5. Impostazione
5.1 Requisiti di sistema
Ensure your computer meets the following minimum requirements:
- Per Mac: macOS 10.11 or later, Intel Core 2 Duo or later, 4 GB RAM (8 GB recommended).
- Per PC: Windows 7, 8, 10, or 11 (64-bit), Intel Core 2 Duo or AMD Athlon 64 X2 or later, 4 GB RAM (8 GB recommended).
- Porta USB disponibile.
5.2 Installazione del software
Register your product and download the necessary software and drivers from the IK Multimedia website. This includes the AXE I/O control panel, AmpliTube 5 SE, TONEX SE, and Ableton Live 10 Lite.
Figura 4: Screenshot del AmpliTube 5 SE software interface.
Figure 5: Screenshot of the TONEX SE software interface.
5.3 Connessione hardware
- Connect the AXE I/O to your computer using the provided USB cable.
- Connect the external power supply to the DC input and plug it into a power outlet.
- Connect your guitar or bass to Input 1 or 2 on the front panel.
- Connect your studio monitors to Line Outputs 1/L and 2/R on the rear panel.
- Plug in headphones to the front panel headphone output for private monitoring.
6. Istruzioni per l'uso
6.1 Registrazione di base
To record your instrument or vocals:
- Ensure the AXE I/O is connected and recognized by your DAW.
- Select the appropriate input (Input 1 or 2) in your DAW.
- Adjust the input gain using the corresponding knob on the front panel until the input level is healthy but not clipping.
- Use the Monitor knob to blend your direct signal with the DAW playback for zero-latency monitoring.
6.2 Z-TONE Control and Preamp Selezione
The Z-TONE control allows you to fine-tune the impedance of your guitar input, affecting the tone and feel of your instrument. Experiment with the knob to find the sweet spot for your guitar and playing style. The Active/Passive switch optimizes the input for different pickup types, while the JFET/PURE switch offers distinct preamp sonorizzazioni.
6.3 Ri-Amping Functionality
Il dedicato Amp Out allows you to send a previously recorded dry guitar signal from your DAW to an external amplifier or stompbox for re-amping. This provides flexibility to experiment with different amp tones after the initial recording.
6.4 MIDI and External Control
Connect MIDI keyboards, controllers, or other MIDI-compatible devices to the MIDI In/Out ports. The two external control inputs can be configured via the AXE I/O control panel to control various parameters within your DAW or software effects using expression pedals or footswitches.
Figure 6: Screenshot of the AXE I/O control software for I/O configuration and external controls.
7. Manutenzione
To ensure the longevity and optimal performance of your AXE I/O:
- Clean the unit with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Mantenere l'unità libera da polvere e detriti.
- Conservare l'unità in un luogo fresco e asciutto quando non viene utilizzata.
- Regularly check cable connections for wear and tear.
8. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna uscita audio | Incorrect audio device selection in DAW; cables not connected properly; volume knobs turned down. | Verify AXE I/O is selected as input/output in DAW; check all cable connections; ensure Master and Headphone volume knobs are up. |
| Taglio del segnale in ingresso | Il guadagno in ingresso è troppo alto. | Reduce the corresponding Input Gain knob until the CLIP indicator no longer lights up. |
| No phantom power for mic | 48V button not engaged. | Press the 48V button on the front panel to activate phantom power. |
| Alta latenza | Buffer size in DAW is too high. | Reduce the buffer size in your DAW's audio settings. |
9. Specifiche
- Tecnologia di connettività: USB
- Numero di canali: 2
- S . massimoample Tariffa: 192 kHz
- Ingresso audio: USB
- Dispositivi compatibili: Personal Computer (Mac/PC)
- Software supportato: AmpliTube 5 SE, TONEX SE, Mac/PC drivers
- Peso dell'articolo: 4 libbre
10. Garanzia e supporto
The IK Multimedia AXE I/O comes with a Garanzia del produttore di 1 anno. For technical support, product registration, or further assistance, please visit the official IK Multimedia websito o fare riferimento alle informazioni di contatto fornite sulla confezione del prodotto.
Official product videos:
AXE I/O 2-channel audio interface with guitar tone shaping
Video 1: Un overview of the AXE I/O audio interface highlighting its guitar tone shaping features.
AXE I/O 2-channel audio interface with guitar tone shaping, amp output and software recording bundle
Video 2: A detailed look at the AXE I/O's features, including amp output and bundled software.