1. Introduzione
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 x Manuale utente
- Staffe di montaggio e viti
3. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | HOS-401WBT |
| Tipo di altoparlante | Esterno / Interno |
| Potenza in uscita | 200 Watt (100 W per altoparlante) |
| Diametro del woofer | 4 pollici |
| Diametro del tweeter | 1 pollici |
| Connettività | Bluetooth, Wired (Passive speaker connection) |
| Portata Bluetooth | Fino a 20.12 metri (66 piedi) |
| Livello di resistenza all'acqua | IP66 (resistente all'acqua) |
| Materiale | Acrilonitrile Butadiene Stirene (ABS) |
| Dimensioni del prodotto (L x P x A) | 8.62" x 5.67" x 6.62" (219 mm x 144 mm x 159 mm) |
| Ingresso volumetage | 12 Volt |
| Modalità di uscita audio | Stereo |
4. Impostazione
4.1 Montaggio degli altoparlanti
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- Rimuovi parentesi: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- Posizionamento del segno: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- Installare le staffe: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- Attach Speakers: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.
4.2 Cablaggio degli altoparlanti
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- Collegamento elettrico: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.
5. Funzionamento
5.1 Associazione Bluetooth
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- Attiva Bluetooth: Attiva il Bluetooth sul tuo smartphone o tablet.
- Cercare Dispositivo: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- Collegare: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.
5.2 Riproduzione audio
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- Controllo del volume: Regola il volume direttamente dal tuo dispositivo connesso.
- Qualità del suono: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. Manutenzione
- Pulizia: Utilizzare un panno morbido e asciutto per pulire le superfici degli altoparlanti. Evitare detergenti abrasivi o solventi.
- Protezione dalle intemperie: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- Magazzinaggio: Se si conservano gli altoparlanti per un periodo prolungato, scollegarli dall'alimentazione e conservarli in un luogo fresco e asciutto.
7. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun potere | Adattatore di alimentazione non collegato o presa difettosa. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| Nessun suono | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| Disconnessione Bluetooth | Device out of range or interference. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| Suono distorto | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. Garanzia e supporto
All Herdio speaker products come with a Garanzia limitata di 1 anno against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
Per domande o supporto, contattateci a: support@herdiotech.com