KING KB ECO2S Garage Heater 15000W/240V Instruction Manual

1. Introduzione

The KING KB ECO2S Garage Heater is designed to provide efficient and controlled heating for garages and similar large spaces. This unit features an integrated ECO2S electronic thermostat with remote control, offering energy-efficient 2-stage heating and an Eco mode that automatically adjusts wattage. It also includes fan-only and timer modes, along with an auto-memory feature to retain settings after power interruptions. Constructed with spiral steel elements and a high CFM fan, it ensures even air distribution and prolonged heater life. A universal wall/ceiling bracket is included for flexible installation.

Immagine: Frontale view of the KING KB ECO2S Garage Heater, highlighting the control panel and heating elements.

2. Informazioni importanti sulla sicurezza

WARNING: Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Scollegare sempre l'alimentazione prima di effettuare interventi di manutenzione o pulizia sul riscaldatore.
• Questo riscaldatore è caldo quando è in uso. Per evitare ustioni, non lasciare che la pelle nuda tocchi superfici calde.
• Tenere materiali combustibili, come mobili, cuscini, biancheria da letto, carta, vestiti e tende ad almeno 3 piedi (0.9 m) dalla parte anteriore della stufa e tenerli lontani dai lati e dalla parte posteriore.
• Non utilizzare all'aperto.
• Questo riscaldatore non è destinato all'uso in bagni, aree lavanderia e simili luoghi interni.
• Non far passare il cavo sotto la moquette. Non coprire il cavo con tappeti, passatoie o rivestimenti simili. Disporre il cavo lontano dall'area di passaggio e dove non ci si possa inciampare.
• Collegare sempre i riscaldatori direttamente a una presa a muro/presa. Non utilizzare mai con una prolunga o una presa di corrente riposizionabile (presa/multipresa).
• This heater is for 240V applications only. Ensure proper wiring and circuit breaker capacity.
• L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto di tutte le normative elettriche locali e nazionali.

3. Contenuto della confezione

The KING KB ECO2S Garage Heater package includes the following items:

• Unità di riscaldamento per garage KING KB ECO2S
• Staffa di montaggio universale a parete/soffitto
• Telecomando palmare
• Remote Control Wall Holder
• Installation Hardware (lag bolts, nuts, etc.)
• Heavy-duty pigtail (for electrical connection)

Image: KING KB ECO2S Garage Heater shown with its included mounting bracket and remote control.

4. Configurazione e installazione

4.1 Montaggio del riscaldatore

The universal bracket allows for wall or ceiling mounting. Ensure the mounting surface can support the heater's weight (approximately 48 pounds) and is structurally sound. Use the provided lag bolts to secure the bracket to framing members.

• Attach the bracket to the heater using the large knobs on the sides.
• Adjust the heater's angle using the smaller knobs on the bracket. The heater can be tilted to four different positions to direct heat as needed.

Image: Diagram illustrating recommended garage coverage based on heater wattage. The 15000W model heats up to 1,500 sq ft.

4.2 Collegamento elettrico

ATTENZIONE: l'installazione elettrica deve essere eseguita da un elettricista autorizzato, nel rispetto di tutti i codici elettrici locali e nazionali.

• Ensure power is disconnected at the circuit breaker before beginning any wiring.
• Remove the access panel on the heater by loosening the Phillips screw.
• Remove the knockout on the side of the heater where the wiring will enter.
• Install the provided grommet with integral strain relief into the knockout hole.
• Connect the heavy-duty pigtail wires to the terminal block inside the heater:
  • Black wire to L1 lug.
  • Red wire to L2 lug.
  • Green wire to the grounding screw.
• Ensure all wires are securely tightened and that no insulation is under the terminals.
• Tighten the strain relief nut to secure the pigtail and prevent damage to the wiring.
• Close the access panel and secure it with the Phillips screw.
• This 15000W, 240V unit requires a minimum of 8 AWG copper wire and a 40 Amp interruttore.

Immagine: Posteriore view of the heater with the wiring access panel open, showing the terminal block for electrical connections.

4.3 Impostazione del termostato

On the back of the heater, there is a toggle switch to select between the built-in thermostat and an external thermostat.

• Set the switch to "I" for the built-in thermostat (recommended for most users).
• Set the switch to "II" if you are using an external thermostat wired by an electrician.
• Incorrect setting of this switch will prevent normal operation.

4.4 Installation Video Reference

The following video demonstrates the wiring and mounting process for a similar garage heater. While the model shown is 6000W, the general installation principles apply to the KING KB ECO2S heater.

5. Istruzioni per l'uso

The heater features an intuitive control panel and a remote control for convenient operation.

5.1 Pannello di controllo

Upon plugging in the unit, it will beep, indicating power and correct voltage. The control panel features a digital display and several buttons:

• Pulsante di accensione: Accende/Spegne l'unità.
• Pulsante Modalità: Cycles through different heating modes:
  • Basso: Operates at a lower wattage.
  • Modalità ecologica: Automatically uses the lowest wattage needed to heat the room, optimizing energy efficiency.
  • Solo fan: Fa circolare l'aria senza riscaldare.
  • Alto: Operates at maximum wattage for rapid heating.
• Pulsanti su/giù: Regolare l'impostazione della temperatura desiderata.
• Pulsante Timer: Sets a timer for the heater to run for a predetermined length of time, after which it will automatically shut off.

Immagine: Frontale view of the heater, showing the adjustable louvers for directing airflow.

5.2 telecomando

The compact remote control provides full functionality from a distance, allowing you to adjust settings without directly accessing the unit.

• Pulsante di accensione: Accende/Spegne l'unità.
• Pulsante Modalità: Cycles through heating modes (Low, Eco, Fan Only, High).
• Temperatura su/giù: Regola la temperatura desiderata.
• Pulsante Timer: Imposta il timer di funzionamento.

The remote control is a convenient feature, especially when the heater is mounted high or in a hard-to-reach location.

6. Manutenzione

WARNING: Always disconnect power at the main service panel before attempting any maintenance or cleaning.

• Pulizia: Pulire periodicamente l'esterno del riscaldatore con un panno morbido eamp panno. Non usare detergenti abrasivi o solventi.
• Rimozione della polvere: Use a vacuum cleaner with a brush attachment to remove dust from the grilles and heating elements. Ensure the heater is completely cool before cleaning.
• Ispezione: Regularly inspect the power cord and plug for any signs of damage. If damaged, do not use the heater and contact a qualified electrician for repair.
• Lubrificazione: The unit features a permanently lubricated motor and does not require additional lubrication.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

For warranty information, please refer to the documentation included with your product or visit the official KING website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact KING customer service.

Le informazioni di contatto possono essere trovate in genere sul sito web del produttore websito o nella confezione del prodotto.