XTUGA EW240 UHF 4-Channel Wireless Microphone System

1. Introduzione

Thank you for choosing the XTUGA EW240 UHF 4-Channel Wireless Microphone System. This professional wireless microphone system is designed to deliver clear and powerful audio performance for various applications, including family parties, stages, churches, and karaoke. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your system.

2. Informazioni importanti sulla sicurezza

• Leggere attentamente tutte le istruzioni prima di utilizzare il prodotto.
• Conservare questo manuale per riferimento futuro.
• Non esporre l'unità alla pioggia o all'umidità per evitare incendi o scosse elettriche.
• Assicurare una ventilazione adeguata e non ostruire le aperture di ventilazione.
• Utilizzare solo l'alimentatore fornito con l'unità.
• Non tentare di smontare o modificare l'unità. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.
• Smaltire le batterie secondo le normative locali.

3. Contenuto della confezione

Si prega di controllare il pacco per assicurarsi che siano presenti tutti gli articoli:

• 1 x 4-Channel Receiver
• 1 x Manuale utente
• 4 trasmettitori da tasca
• 4 microfoni Lavalier
• 4 microfoni per cuffie
• 1 adattatore di alimentazione da 110 V/220 V

4. Prodotto finitoview

4.1 Unità ricevente

The receiver is the central unit of the wireless microphone system, featuring a durable metal design and individual volume controls for each of its four channels. It includes four receiving antennas for stable signal reception and an LCD display for monitoring operating status.

4.2 Trasmettitori Bodypack

The system includes four bodypack transmitters, each designed for use with either a lavalier or headset microphone. These transmitters are compact, feature an LCD display for battery and operating status, and are powered by two 1.5V batteries, offering up to 8 hours of continuous use.

5. Istruzioni per l'installazione

5.1 Configurazione del ricevitore

1. Posizionamento: Place the receiver on a stable, flat surface, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation around the unit.
2. Connessione dell'antenna: Screw the four included antennas onto the ANT A, ANT B, ANT C, and ANT D connectors on the rear panel of the receiver. Position them vertically for optimal signal reception.



3. Collegamento elettrico: Connect the supplied power adapter to the DC 16V, 400mA input on the rear of the receiver, then plug it into a suitable power outlet.
4. Uscita audio: Collega il ricevitore al tuo mixer, amplifier, or sound system using either the 6.3cm (1/4 inch) mixed output or the individual 6.3cm (1/4 inch) outputs for each channel (OUT A, OUT B, OUT C, OUT D).

5.2 Impostazione del trasmettitore

1. Installazione della batteria: Open the battery compartment of each bodypack transmitter. Insert two 1.5V AA batteries, ensuring correct polarity. Close the compartment securely.
2. Connessione microfono: Plug the lavalier or headset microphone into the input jack on the bodypack transmitter.
3. Accensione: Turn on the power switch on the bodypack transmitter. The LCD display will illuminate, showing the channel and battery status.

6. Istruzioni per l'uso

1. Accensione del sistema: First, power on the receiver. Then, power on each bodypack transmitter.
2. Regolazione del volume: Use the individual volume control knobs on the receiver for each channel (CH 01, CH 02, CH 03, CH 04) to adjust the microphone levels. Start with the volume low and gradually increase it to avoid feedback.
3. Indicatori di segnale: The receiver's LCD display will show the active channel frequencies. The RF (Radio Frequency) and AF (Audio Frequency) indicators will light up when a signal is being received and audio is present, respectively.
4. Utilizzo: Position the lavalier microphone approximately 6-8 inches from your mouth, or wear the headset microphone comfortably. Speak clearly into the microphone.
5. Spegnimento: When finished, first turn off the bodypack transmitters, then power off the receiver. This helps prevent pops or thumps through your sound system.

7. Manutenzione

• Pulizia: Use a soft, dry cloth to clean the receiver and transmitters. Do not use liquid cleaners or solvents.
• Sostituzione della batteria: Replace batteries in the bodypack transmitters when the low battery indicator appears on the LCD display. Always use fresh, high-quality 1.5V AA batteries.
• Magazzinaggio: Store the system in a cool, dry place when not in use. Remove batteries from transmitters if storing for extended periods to prevent leakage.
• Cura dell'antenna: Handle antennas carefully. Avoid bending them excessively.

8. Risoluzione Dei Problemi

9. Specifiche

9.1 General System

• Numero di canali: 4 canali
• Stabilità: ± 0.006%
• Normal Deviation: ± 22kHz
• Rapporto segnale/rumore: <120 dB
• THD: <0.6%
• Risposta in frequenza: 50 Hz - 15 kHz
• Allineare: 65 metri

9.2 Ricevitore

• Sensibilità: > 80 dB
• Uscita audio: Balanced and Unbalanced (6.3cm mixed output, four 6.3cm individual outputs)
• Requisiti di alimentazione: AC 16 V, 400 mA
• Dimensioni: Dimensioni: 440 x 210 x 40 mm
• Peso: Circa 1.3 kg
• Materiale: Metallo

9.3 Wireless Microphone (Transmitter)

• Tipo di cartuccia: Dinamico
• Uscita RF: <10mW
• Normal Deviation: ± 22kHz
• Deviazione massima: ± 80kHz
• Batteria: 2 batterie AA da 1.5 V
• Durata della batteria: 8 ore

10. Garanzia e supporto

XTUGA products are designed for reliability and performance. For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official XTUGA websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.