Zerone TPA3116D2 Digital AmpManuale dell'utente della scheda lifier

1. Prodotto finitoview

The Zerone TPA3116D2 is a high-power 2.1 channel digital audio amplifier board designed for various audio applications. It features two TPA3116D2 amplifier chips, providing a total output of 80W x 2 for stereo channels and 100W for the subwoofer channel. This module operates on a DC 12-26V power supply and offers adjustable volume, bass, and stereo controls for a customized audio experience.

2 Caratteristiche

• Dual TPA3116D2 Chips: Integrates two TPA3116D2 digital amplifier chips for stable and reliable performance.
• Uscita canale 2.1: Provides 80W x 2 (stereo) + 100W (subwoofer) high-power output.
• Ampio volumetage Gamma: Compatible with DC 12-26V power input.
• Elevato rapporto segnale-rumore: Achieves 100 decibels signal-to-noise ratio for clear audio quality.
• Controlli regolabili: Independent volume, bass, and stereo (treble) adjustment knobs.
• Costruzione durevole: Built with premium materials for practical and long-lasting use.

Immagine 2.1: Passoview del amplifier board highlighting the dual TPA3116D2 chips.

3. Informazioni sulla sicurezza

• Garantire l'alimentazione voltage is within the specified DC 12-26V range. Exceeding this range can damage the device.
• Always disconnect power before making any connections or disconnections to prevent electrical shock or damage.
• Evitare di esporre il amppannello lifier all'umidità, all'acqua o alle temperature estreme.
• Do not touch the components on the board while it is powered on, especially the heatsink, as it may become hot.
• Tenere il dispositivo lontano dalla portata dei bambini.
• Assicurare una ventilazione adeguata attorno all' amplifier board during operation.

4. Contenuto della confezione

Si prega di controllare il contenuto della confezione al momento della ricezione. La confezione standard include:

• Zerone TPA3116D2 Digital Amplifier Board (1 unit)
• (Note: Additional cables or power supply may not be included and must be purchased separately.)

5. Diagramma del prodotto e componenti

Familiarize yourself with the various components and connection points on the ampbordo dell'allevatore.

Immagine 5.1: In alto view del ampbordo dell'allevatore.

• 1. POWER Input: DC 12-26V power supply connection.
• 2. INGRESSO: Audio signal input (e.g., from a smartphone, PC, or MP3 player).
• 3. VOL (Volume): Manopola di controllo del volume principale.
• 4. BASSO: Bass frequency adjustment knob.
• 5. STERE (Stereo/Treble): Stereo channel (treble) adjustment knob.
• 6. +OUTL-: Left channel speaker output terminals.
• 7. +OUTR-: Right channel speaker output terminals.
• 8. +BASS-: Subwoofer speaker output terminals.

Immagine 5.2: In basso view del amplifier board, showing mounting points and solder pads.

6. Istruzioni per l'installazione

Segui questi passaggi per impostare correttamente il tuo ampscheda di supporto:

1. Collegamento dell'alimentazione: Connect a DC 12-26V power supply to the "POWER" input terminals. Ensure correct polarity (+ to + and - to -). A power supply with sufficient current capacity (e.g., 5A or higher for full power) is recommended.
2. Connessione ingresso audio: Connect your audio source (e.g., smartphone, PC, MP3 player) to the "INPUT" jack using an appropriate audio cable.
3. Collegamenti degli altoparlanti:
   • Connect your left speaker to the "+OUTL-" terminals.
   • Connect your right speaker to the "+OUTR-" terminals.
   • Connect your subwoofer to the "+BASS-" terminals.
   Ensure all speaker connections have correct polarity (+ to + and - to -) to avoid phase issues and ensure optimal sound quality.
4. Initial Knob Settings: Before powering on, set the VOL, BASS, and STERE knobs to their minimum positions to prevent sudden loud sounds.
5. Accensione: Once all connections are secure, connect the power supply to a wall outlet. The board should power on.

7. Istruzioni per l'uso

After successful setup, follow these steps to operate the amplificatore:

1. Regola volume: Slowly turn the "VOL" knob clockwise to increase the master volume to your desired listening level.
2. Regola i bassi: Use the "BASS" knob to increase or decrease the low-frequency output for the subwoofer and main channels.
3. Adjust Stereo (Treble): Use the "STERE" knob to adjust the high-frequency output for the left and right stereo channels.
4. Spegni: Per disattivare il amplifier, disconnect the power supply. It is recommended to turn the volume down before powering off.

Image 7.1: Control knobs for volume, bass, and stereo adjustment.

8. Manutenzione

Una corretta manutenzione garantisce la longevità e le prestazioni ottimali del tuo ampscheda di supporto:

• Pulizia: Use a soft, dry cloth to gently wipe the surface of the board. Do not use liquid cleaners or solvents.
• Rimozione della polvere: Periodically use compressed air to remove dust from components and heatsinks to maintain proper cooling.
• Magazzinaggio: When not in use for extended periods, store the board in a dry, cool environment, away from direct sunlight and moisture.
• Ispezione: Periodically inspect connections for looseness or corrosion.

9. Risoluzione Dei Problemi

Se riscontri problemi con il tuo amplifier board, refer to the following troubleshooting guide:

10. Specifiche

11. Garanzia e supporto

Specific warranty information for this product is not provided in the available documentation. For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer, Zerone, directly through their official support channels. Please retain your proof of purchase for any warranty-related inquiries.

Spesso puoi trovare le informazioni di contatto sul sito del rivenditore website or by searching for "Zerone official support" online.