Introduzione
Thank you for choosing the Makerfire 7.4V 600mAh 2S Lipo Battery. This high-performance lithium polymer battery is designed for micro FPV racing drones and quadcopters, offering a reliable power source with an XT30 connector. Please read this manual thoroughly before using the battery to ensure safe operation and optimal performance.
Importanti istruzioni di sicurezza
Lithium Polymer (LiPo) batteries are powerful and require careful handling. Failure to follow these safety guidelines can result in fire, personal injury, and property damage.
- Ricarica: Always use a LiPo-compatible balance charger. Never charge unattended. Charge on a non-flammable surface away from combustible materials. Ensure charging current and voltage settings match the battery specifications (7.4V, 2S, 600mAh).
- Scaricamento: Do not over-discharge the battery. Stop use immediately if the voltage drops below 3.0V per cell (6.0V for a 2S battery). Over-discharging can permanently damage the battery.
- Magazzinaggio: Store LiPo batteries at room temperature in a fireproof container, away from direct sunlight, heat sources, and flammable materials. For long-term storage, charge or discharge the battery to a storage voltage of 3.8V per cell (7.6V for a 2S battery).
- Danni fisici: Inspect the battery for any signs of damage (swelling, punctures, leaks, bent connectors) before each use. Do not use a damaged battery.
- Temperatura: Non esporre la batteria a temperature estreme. Evitare di caricarla o scaricarla a temperature inferiori a 0 °C (32 °F) o superiori a 45 °C (113 °F).
- Disposizione: Dispose of LiPo batteries responsibly according to local regulations. Never dispose of them in regular trash or by incineration.
- Bambini: Tenere le batterie fuori dalla portata dei bambini.
Caratteristiche del prodotto
- Alta capacità: 600mAh for extended flight times.
- Voltage: 7.4V (2S) for consistent power delivery.
- Tasso di scarico: 50C continuous / 100C burst for demanding applications.
- Connettore: XT30 plug for secure and efficient power connection.
- Balancer Connector: JST-XHR for precise cell balancing during charging.
- Design leggero: Optimized for micro FPV racing drones.
Specifiche
Image: Makerfire 7.4V 600mAh 2S Lipo Battery with XT30 Plug, showing its overall design and connectors.
| Caratteristica | Dettaglio |
|---|---|
| Capacità della batteria | 600 mAh |
| Volume batteriatage | 7.4V (2 secondi) |
| Tasso di scarico | 50C (Continuous) / 100C (Burst) |
| Tipo di connettore | Spina XT30 |
| Configurazione delle celle | 2S1P |
| Connettore bilanciatore | JST-XHR |
| Peso | Circa 33.28 g (1.17 oz) |
| Dimensioni (L x P x A) | 62 mm x 16 mm x 14 mm (2.44 x 0.63 x 0.55 pollici) |
| Wire Gauge | 18AWG Silicone Wire |
Image: Detailed dimensions of the Makerfire 7.4V 600mAh 2S Lipo Battery, showing length, width, and height measurements.
Image: The Makerfire 7.4V 600mAh 2S Lipo Battery being weighed on a digital scale, displaying approximately 33.28 grams.
Impostare
1. Ricarica iniziale
Before first use, fully charge the battery using a compatible LiPo balance charger. Ensure the charger is set to the correct voltage (7.4V or 2S) and capacity (600mAh) for this battery. Always monitor the charging process.
Immagine: Primo piano view of the battery's components, highlighting the 18AWG Silicone Wire, XT30 Plug, and JST-XHR balancer connector.
2. Installation in Device
Carefully connect the XT30 plug of the battery to the corresponding connector on your micro FPV racing drone or quadcopter. Ensure the JST-XHR balance lead is not pinched or damaged during installation. Secure the battery within the device to prevent movement during operation.
Image: Diagram illustrating the compatibility of the 600mAh 2S Lipo Battery with several micro FPV drones and quadcopters.
Istruzioni per l'uso
- Controllo pre-volo: Controllare sempre il vol. della batteriatage before each flight to ensure it is fully charged and healthy.
- Connessione: Connect the battery to your device's power input. Ensure a firm connection.
- Monitoraggio: During operation, monitor the battery voltage, especially if your device has telemetry. Stop flying when the battery reaches its minimum safe voltage (6.0V for 2S) to prevent over-discharge.
- Disconnessione: After use, disconnect the battery from the device.
Manutenzione e stoccaggio
- Ispezione regolare: Periodically inspect the battery for any signs of swelling, damage to the casing, or connector issues.
- Pulizia: Keep the battery and connectors clean and free from dirt or debris.
- Stoccaggio a lungo termine: If storing the battery for more than a few days, charge or discharge it to a storage voltage of 3.8V per cell (7.6V for a 2S battery). This helps prolong battery life.
- Ambiente di archiviazione: Store batteries in a cool, dry place, ideally in a fireproof LiPo bag or container, away from direct sunlight and extreme temperatures.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Batteria non in carica | Incorrect charger settings; damaged charger or battery; poor connection. | Verify charger settings (LiPo, 2S, 7.4V, 600mAh); check all connections; inspect battery for damage. If damaged, discontinue use. |
| Tempi di volo brevi | Battery degradation; over-discharge; high power consumption by device. | Ensure battery is fully charged; avoid over-discharging; consider device power draw. Replace battery if degradation is significant. |
| Gonfiore della batteria | Overcharging; over-discharging; physical damage; internal short circuit. | Interrompere immediatamente l'uso. Swelling indicates a dangerous condition. Safely dispose of the battery. |
Garanzia e supporto
For warranty information or technical support regarding your Makerfire 7.4V 600mAh 2S Lipo Battery, please contact Makerfire customer service through their official website or the retailer from whom you purchased the product. Please have your purchase details and product model information ready.