Introduzione
This manual provides essential instructions for the Pyle Wireless Handheld Microphone, designed for use with Pyle Models PWMA120BM and PWMA1216BM (Old Version). Please read this guide thoroughly to ensure proper setup, operation, and maintenance of your device. Retain this manual for future reference.
Image of the Pyle Wireless Handheld Microphone, showcasing its design and grille.
Contenuto della confezione:
- Microfono palmare wireless
Impostare
1. Installazione della batteria
- Locate the battery compartment on the microphone handle. This is typically at the bottom, accessible by unscrewing or sliding a cover.
- Aprire il vano batteria.
- Insert the required batteries (e.g., 2x AA batteries, refer to the compartment for specific type) ensuring correct polarity (+/-) as indicated inside the compartment.
- Chiudere saldamente il vano batteria.
2. Connecting to Receiver
- Ensure your compatible Pyle receiver (models PWMA120BM or PWMA1216BM) is powered on and properly connected to your audio system.
- Turn on the wireless handheld microphone using its power switch, usually located on the microphone body.
- The microphone and receiver are designed to automatically establish a connection on the 50 MHz frequency.
- If a connection is not established, refer to your specific receiver's instruction manual for detailed pairing or frequency synchronization procedures.
Istruzioni per l'uso
Accensione/spegnimento
- To power on the microphone, slide the power switch to the "ON" position.
- To power off the microphone, slide the power switch to the "OFF" position.
Utilizzo del microfono
- For optimal sound pickup and clarity, hold the microphone approximately 2 to 6 inches (5-15 cm) from your mouth.
- Avoid covering the microphone grille with your hand, as this can significantly affect sound quality and cause feedback.
- Monitor the audio output from your receiver or connected sound system to adjust volume levels as needed for your environment.
Manutenzione
Pulizia
- Wipe the exterior of the microphone body with a soft, dry cloth.
- Do not use liquid cleaners, abrasive chemicals, or solvents, as these can damage the finish or internal components.
- For the microphone grille, use a soft brush to gently remove any dust or debris.
Magazzinaggio
- When the microphone will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
- Store the microphone in a dry, cool place, away from direct sunlight, high humidity, and extreme temperatures.
Risoluzione dei problemi
Nessuna uscita audio
- Controlla la potenza: Ensure both the wireless microphone and the compatible Pyle receiver are powered on.
- Batterie: Verify that the batteries in the microphone are correctly installed and have sufficient charge. Replace them if necessary.
- Connessione: Confirm that the microphone is properly connected or paired with the receiver. Refer to the receiver's manual for specific pairing instructions if automatic connection fails.
- Volume: Check the volume settings on your receiver and any connected audio system. Ensure they are not muted or set too low.
Poor Sound Quality / Interference
- Distanza: Ensure the microphone is within the recommended operational range of the receiver. Excessive distance can lead to signal degradation.
- Ostruzioni: Minimize physical obstructions (e.g., walls, large metal objects) between the microphone and receiver, as these can block the wireless signal.
- Interferenza: Move away from other electronic devices that may operate on similar frequencies or cause electromagnetic interference (e.g., Wi-Fi routers, cordless phones, other wireless systems).
- Livello della batteria: Low battery levels can affect the microphone's performance and signal strength. Replace batteries if they are weak.
Specifiche
| Marca | Pilo |
| Tecnologia di connettività | RF (radiofrequenza) |
| Tipo di connettore | Senza fili (RF) |
| Caratteristica speciale | Funzionamento senza fili |
| Componenti inclusi | Microfono |
| Modello polare | Unidirezionale |
| Peso dell'articolo | 0.4 libbre (circa 181 grammi) |
| Fattore di forma del microfono | Portatile |
| Dimensioni articolo (L x P x A) | 5 x 5 x 5 pollici (circa 12.7 x 12.7 x 12.7 cm) |
| Fonte di alimentazione | Alimentato a batteria |
| Signal-to-Noise Ratio | 78 dB |
| Numero di canali | 1 |
| Gamma di frequenza | 50 MHz |
| Produttore | Pilo |
| Codice UPC | 842893112015 |
Garanzia e supporto
Pyle products typically come with a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the official Pyle website or the documentation included with your original purchase.
For technical support, service inquiries, or to register your product, please visit the official Pyle USA website or contact their customer service department directly. Keep your purchase receipt or proof of purchase for any warranty claims.
Spesso puoi trovare risorse di supporto, FAQ e informazioni di contatto su Pile USA websito.