1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your EMANER Model 7042-WH Dual-Head LED Security Light. Please read this manual thoroughly before installation and retain it for future reference.
Davanti view of the EMANER Dual-Head LED Security Light, highlighting its two rotatable light heads and motion sensor. A 120V warning label is visible.
2. Informazioni sulla sicurezza
AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione dal fusibile o dall'interruttore automatico prima dell'installazione o della manutenzione. Tutti i collegamenti elettrici devono essere conformi alle normative elettriche locali e nazionali.
- Assicurarsi che l'alimentazione sia a 120 V CA.
- Non installare vicino a materiali combustibili.
- This product is designed for outdoor use and is IP65 waterproof rated.
- In caso di dubbi sulla procedura di installazione, consultare un elettricista qualificato.
- Non guardare direttamente la sorgente luminosa a LED quando è accesa.
3. Prodotto finitoview e componenti
The EMANER Model 7042-WH is a dual-head LED security light featuring a rotatable design and multiple intelligent control modes. Key components include:
- Teste luminose girevoli: Two adjustable LED light panels.
- PIR sensore di movimento: Sensore a infrarossi passivi per il rilevamento del movimento.
- Manopole di controllo: For adjusting time delay and sensitivity.
- Hardware di montaggio: Includes mounting strap, screws, and wire nuts.
A diagram providing precise measurements of the security light's length, width, height, and the dimensions of the rotatable light heads and PIR motion sensor.
4. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Marca | EMANERO |
| Numero di modello | 7042-WH |
| Colore | White Fixture |
| Materiale | ABS Plastic + Aluminum internal |
| Tipo di sorgente luminosa | GUIDATO |
| Cosatage | 28 Watt |
| Luminosità | 2800 lumen |
| Temperatura del colore | Bianco diurno 5000K |
| Voltage | 120 Volt |
| Livello di resistenza all'acqua | IP65 impermeabile |
| Angolo di rilevamento | 180 gradi |
| Distanza di rilevamento | 20-70 feet (adjustable) |
| Tipo di montaggio | Wall mount, Eave/Soffit mount |
| Dimensioni del prodotto | 9 cm L x 7.4 cm P x 6.4 cm A |
| Peso dell'articolo | 1.74 libbre |
5. Configurazione e installazione
This LED security light is designed for easy installation. Follow these steps carefully:
5.1 Preinstallazione
- Spegnere l'alimentazione: Disconnect power at the circuit breaker or fuse box before beginning installation.
- Select mounting location: Choose a wall or eave/soffit location that provides the desired coverage and is within reach of existing wiring. Recommended mounting height is 6.5-12 feet.
- Contenuto della confezione: Ensure all components are present: light fixture, mounting strap, screws, and wire nuts.
5.2 Cablaggio e montaggio
- Attach the mounting strap to your existing electrical outlet box using the provided screws.
- Collegare i cavi elettrici:
- Collegare il nero Cavo (sotto tensione) dall'apparecchio al nero Cavo (sotto tensione) proveniente dalla scatola di derivazione.
- Collegare il bianco Cavo (neutro) dall'apparecchio al bianco Cavo (neutro) dalla scatola di derivazione.
- Collegare il green/bare copper (Terra) filo dall'apparecchio al green/bare copper Cavo (di terra) dalla scatola di derivazione.
- Inserire con cura i fili nella scatola della presa.
- Align the light fixture with the mounting strap and secure it with the decorative cover and fixture mounting screw.
- Regola le teste luminose e il sensore di movimento secondo l'angolazione desiderata.
Diagram for installing the security light, detailing wire connections, mounting strap, back plate, and attaching the light head and sensor.
Illustrations showing two common installation methods: mounting the light under an eave or soffit, and mounting it directly onto a wall.
6. Modalità operative e impostazioni
The security light features a control panel with dials for TIME and SENSITIVITY, and a slide switch for selecting operating modes. All modes operate only at night or in dark environments, automatically turning off at dawn.
An infographic explaining the various operating modes: TEST, AUTO, Motion Sensor, 6 Hours, and Dusk to Dawn (PC) modes, along with their respective time delay and sensitivity settings.
6.1 Pannello di controllo Sopraview
Dettagliato view of the control panel, showing the 'TIME' dial (5S, 3MIN, TEST) and 'SENSITIVITY' dial (+/-) for adjusting light duration and motion detection range.
- Quadrante TIME: Adjusts how long the light stays on after motion is detected (5 seconds to 3 minutes). The 'TEST' setting is for initial setup.
- SENSIBILITÀ Quadrante: Adjusts the motion sensor's detection range (Low to High sensitivity, 20-70 feet).
- Interruttore a scorrimento della modalità: Selects between AUTO, OFF (Motion Sensor), 6H (6 Hours), and PC (Dusk to Dawn Stay On) modes.
An illustration demonstrating the motion sensor's 120-degree sensing angle and adjustable detection distance of 20-39 feet (6-12 meters) from a mounting height of 6.5-12 feet.
Modalità operative 6.2
- Modalità TEST: (Slide switch to 'TEST' on TIME dial) This mode is for testing after installation. When connected to AC power, the light will turn on for 5 seconds based on the time delay setting.
- AUTO Dim Light Mode: (Slide switch to 'AUTO') The security light turns on with dim light at dusk. When motion is detected, it switches to 100% brightness. After no motion is detected for the set time delay (5 seconds to 3 minutes), it returns to dim light. Automatically turns off at dawn.
- Motion On/Off Mode: (Slide switch to 'OFF') The security flood light only turns on at 100% brightness when motion is activated. It automatically turns off when no motion is detected for the set time delay. Automatically turns off at dawn.
- 6 Hours Mode: (Slide switch to '6H') The flood light turns on at 100% brightness and stays on for 6 hours. After 6 hours, it automatically switches to 'AUTO Dim Light Mode'. Automatically turns off at dawn.
- Dusk to Dawn Stay On Mode (PC Mode): (Slide switch to 'PC') The motion security light turns on with bright light (100% brightness) and stays on all night. It automatically turns off in the daytime.
7. Manutenzione
Regular maintenance ensures optimal performance and longevity of your EMANER LED Security Light.
- Pulizia: Pulire periodicamente le teste delle luci e la lente del sensore di movimento con un panno morbido e asciutto.amp panno. Non usare detergenti abrasivi o solventi.
- Ispezione: Ispezionare annualmente il cablaggio e il montaggio per verificare la presenza di segni di usura, danni o collegamenti allentati.
- Nessuna parte riparabile dall'utente: The LED light source is non-removable and not user-serviceable. Do not attempt to open the light heads.
8. Risoluzione Dei Problemi
If you encounter issues with your security light, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende di notte. | 1. L'alimentazione è disattivata. 2. Photocell sensor is detecting ambient light. 3. Problema di cablaggio. | 1. Controllare l'interruttore/fusibile. 2. Ensure the sensor is not obstructed or exposed to other light sources. 3. Verify all wiring connections are secure. |
| La luce rimane costantemente accesa. | 1. Mode set to 'PC' (Dusk to Dawn Stay On). 2. Constant motion detected. 3. Wiring error. | 1. Change mode to 'AUTO' or 'OFF'. 2. Adjust sensor sensitivity or angle to avoid constant triggers. 3. Ricontrollare il cablaggio. |
| Light flashes or cycles on/off rapidly. | 1. Intermittent power supply. 2. Sensor interference. 3. Faulty unit. | 1. Check power connections. 2. Ensure no objects are moving within the sensor's range. 3. Contatta l'assistenza clienti se i problemi persistono. |
| Il sensore di movimento non rileva. | 1. Sensibilità impostata troppo bassa. 2. Sensor obstructed or misaligned. 3. Temperature too high (reduces PIR effectiveness). | 1. Increase SENSITIVITY setting. 2. Clear obstructions and adjust sensor angle. 3. This is normal behavior in very hot weather. |
9. Informazioni sulla garanzia
The EMANER Model 7042-WH LED Security Light comes with a Garanzia del produttore di 2 anniLa presente garanzia copre i difetti di materiali e fabbricazione in condizioni di normale utilizzo. Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.
10. Assistenza clienti
For technical assistance, warranty claims, or any questions regarding your EMANER product, please contact EMANER customer service. You can typically find contact information on the product packaging or through the retailer where the product was purchased.
Alternatively, you may visit the official EMANER brand store online or use the 'Ask a question' feature on the product's retail page.