1. Introduzione e oltreview
The Cisco 561 Wireless Mono Headset is designed for professional use, offering clear audio and wireless freedom. This headset features DECT 6.0 technology for an extended operating range and is optimized for use with Cisco IP Phones, Cisco Jabber, and Webex devices. Its lightweight, over-the-head design ensures comfort during prolonged use, while the uni-directional microphone provides excellent voice clarity.
Image 1.1: The Cisco 561 Wireless Mono Headset, showcasing its sleek design and single earpiece.
2. Istruzioni per l'installazione
Follow these steps to set up your Cisco 561 Wireless Mono Headset and its standard base station.
- Disimballare i componenti: Carefully remove the headset, base station, power adapter, and any included cables from the packaging.
- Connetti alimentazione: Plug the power adapter into the base station and then into a power outlet. The base station's indicator lights should illuminate.
- Connetti al dispositivo:
- For Cisco IP Phones: Connect the base station to your Cisco IP Phone using the appropriate USB-A or RJ-9/AUX cable. Refer to your phone's manual for specific port locations.
- For Computers/Webex Devices: Connect the base station to your computer's USB-A port.
- Carica auricolare: Place the headset onto the base station's charging cradle. Ensure it is seated correctly. The charging indicator on the base or headset will show charging status. Allow the headset to fully charge before first use (approximately 2-3 hours for a full charge).
- Pair Headset (if not pre-paired): Most headsets are pre-paired. If pairing is required, consult the base station's specific pairing button and the headset's power button for instructions. Typically, you press and hold the pairing button on the base until an indicator light flashes, then power on the headset near the base.
Image 2.1: The Cisco 561 Headset placed on its standard base station, ready for charging and connection.
Video 2.1: An official video demonstrating the features and setup of the Cisco Headset 500 Series, which includes the 561 model.
3. Istruzioni per l'uso
Understand how to use your Cisco 561 Headset for calls and audio.
- Indossare l'auricolare: Adjust the headband for a comfortable fit over your head. Position the microphone boom approximately two finger-widths from the corner of your mouth for optimal voice pickup. The headset is monaural, meaning it covers one ear.
- Accensione/spegnimento: Press and hold the power button on the headset for a few seconds to turn it on or off. An audible prompt or indicator light will confirm the status.
- Risposta / chiusura delle chiamate: Press the Call Control button on the headset or base station to answer an incoming call or end an active call.
- Regolazione del volume: Use the volume up (+) and volume down (-) buttons on the headset or the volume dial on the base station to adjust listening volume.
- Disattivazione del microfono: Press the Mute button on the headset or base station to mute or unmute your microphone during a call. An indicator light on the microphone boom or base may show mute status.
- Out-of-Range Warning: If you move beyond the 300 ft operating range, you may hear an audible warning. Move closer to the base station to restore connection.
- Durata della batteria: The headset provides up to 9 hours of talk time on a full charge. Place it on the base station when not in use to keep it charged.
Image 3.1: A user wearing the Cisco 561 Headset, demonstrating its comfortable fit for communication.
4. Manutenzione
Una corretta manutenzione garantisce la longevità e le prestazioni ottimali delle cuffie.
- Pulizia: Use a soft, dry, anti-static cloth to clean the headset and base station. Do not use liquid cleaners or aerosols directly on the device.
- Magazzinaggio: When not in use, store the headset on its base station to keep it charged and protected. Avoid storing in extreme temperatures or direct sunlight.
- Cura della batteria: For best battery life, avoid fully discharging the headset frequently. Charge it regularly, even if not completely depleted.
- Cuscinetti auricolari: Periodically check ear cushions for wear and tear. Replacement cushions may be available from Cisco support.
5. Risoluzione Dei Problemi
If you encounter issues with your Cisco 561 Headset, refer to the following common problems and solutions.
| Problema | Possibile soluzione |
|---|---|
| Nessun suono dalle cuffie |
|
| Il microfono non funziona |
|
| L'auricolare non si accoppia |
|
| Limited wireless range |
|
| L'auricolare non si carica |
|
6. Specifiche
Key technical specifications for the Cisco 561 Wireless Mono Headset.
- Numero modello: CP-HS-WL-561-S-US
- Tecnologia di connettività: Senza fili
- Tecnologia wireless: DECT 6.0
- Distanza operativa wireless: Fino a 300 piedi (91 metri)
- Modalità audio: Mono
- Maximum Frequency Response: 48 kHz
- Posizionamento dell'orecchio: On Ear (Supra-aural)
- Fattore di forma: Over-The-Head, Monaural
- Tipo di microfono: Uni-Directional, Electret, Condenser
- Tipo di controllo: Call Control, Touch (on-ear controls)
- Controllo del rumore: Isolamento acustico
- Durata media della batteria: Fino a 9 ore di conversazione
- Dispositivi compatibili: Cisco IP Phones with USB-A and/or RJ-9/AUX ports (e.g., 6851/6871/6900/7800/8800 models), Cisco Jabber/Webex devices/computers with USB-A ports
- Peso dell'articolo: 16 once (circa 453 grammi)
- Materiale: Pelle (cuscinetti auricolari)
7. Garanzia e supporto
Your Cisco 561 Wireless Mono Headset comes with a limited warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Cisco websito.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Cisco customer support through their official channels. You can typically find support contact information on the Cisco websito o all'interno della confezione del prodotto.
Importante: Keep your proof of purchase and product serial number handy when contacting support.