BOYA RX8Pro Professional Wireless Dual Receiver User Manual

1. Introduzione

The BOYA RX8Pro is a professional UHF dual-channel wireless receiver designed for use with DSLR cameras, mirrorless cameras, and video cameras. It offers reliable audio reception for various professional recording scenarios, including interviews and field recordings. This receiver is built with an all-metal construction for durability and features an intuitive interface for ease of use.

2. Prodotto finitoview

Figura 1: Davanti view of the BOYA RX8Pro Wireless Dual Receiver. It features two flexible antennas, a display screen showing channel information, and control buttons. The BOYA logo is visible at the bottom.

Caratteristiche principali:

• Dual-channel receiver for simultaneous operation of two transmitters.
• 48 selectable UHF channels for interference-free operation.
• 3.5mm locking mini-jack output for secure connection to cameras.
• 3.5mm headphone output for real-time audio monitoring.
• All-metal construction for robust durability.
• LCD display for channel and battery status indication.
• Alimentato da due batterie AA.

3. Guida all'installazione

3.1. Installazione della batteria

1. Locate the battery compartment on the rear of the RX8Pro receiver.
2. Far scorrere per aprire il coperchio della batteria.
3. Inserire due batterie AA, assicurandosi della corretta polarità (+/-).
4. Chiudere bene il coperchio della batteria.

3.2. Montaggio del ricevitore

The RX8Pro includes a detachable shoemount adapter for easy attachment to a camera's hot shoe or cold shoe mount.

1. Attach the shoemount adapter to the bottom of the receiver.
2. Slide the receiver with the shoemount into your camera's hot shoe.
3. Tighten the locking wheel on the shoemount to secure the receiver.
4. Alternatively, use the belt clip for attaching to clothing or a belt.

3.3. Collegamento alla fotocamera

Use the provided cables to connect the receiver to your recording device.

• Per fotocamere DSLR/mirrorless: Use the locking 3.5mm to 3.5mm cable. Connect one end to the RX8Pro's "OUTPUT" jack and the other end to your camera's microphone input.
• For Professional Camcorders/Mixers: Use the locking 3.5mm mini-jack to XLR cable. Connect the 3.5mm end to the RX8Pro's "OUTPUT" jack and the XLR end to your device's XLR input.

4. Istruzioni per l'uso

4.1. Accensione/Spegnimento

Locate the power switch on the side panel of the receiver. Slide it to the "ON" position to power on the device. Slide it to "OFF" to power down.

4.2. Selezione del canale

The RX8Pro features 48 selectable UHF channels. Ensure the receiver and transmitter (sold separately) are set to the same channel to establish a connection.

1. Press the "SET" button to enter the channel selection mode.
2. Use the "+" or "-" buttons to cycle through available channels.
3. Press "SET" again to confirm your selection.
4. Observe the "LINK" indicator on the receiver; it should illuminate when a successful connection with a transmitter is established.

4.3. Monitoraggio audio

Connect headphones to the 3.5mm headphone output jack on the receiver to monitor audio in real-time. This allows you to verify audio quality and levels during recording.

4.4. Output Level Adjustment

Adjust the output level of the receiver to match the input sensitivity of your camera or recording device. Refer to your camera's manual for optimal audio input settings.

5. Manutenzione

• Keep the receiver dry. Do not expose it to water or excessive humidity.
• Pulisci il dispositivo con un panno morbido e asciutto. Evita l'uso di prodotti chimici aggressivi o detergenti abrasivi.
• Rimuovere le batterie se il dispositivo non verrà utilizzato per un periodo prolungato per evitare perdite.
• Conservare il ricevitore in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.

6. Risoluzione Dei Problemi

7. Specifiche

8. Cosa c'è nella scatola

• 1 x RX8Pro Professional Wireless Dual Receiver
• 1 x clip per cintura
• 1 x Locking 3.5mm Mini-Jack to XLR Cable
• 1 x Locking 3.5mm to 3.5mm Cable
• 1 x Detachable Shoemount Adapter
• Manuale dell'utente (questo documento)

9. Garanzia e supporto

Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale BOYA webo contattare il distributore locale. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

BOYA Official Websito: www.boya-mic.com