Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On Instruction Manual

Introduzione

This manual provides essential information for the safe assembly, operation, and maintenance of your Disney Frozen 2 Fly Wheels 10" Junior Cruiser Ride-On. Please read all instructions carefully before assembly and use. Adult supervision is required at all times.

Informazioni sulla sicurezza

• È richiesta la supervisione di un adulto.
• Always ensure your child wears a helmet when operating the ride-on. (Helmet not included).
• This product contains small parts prior to assembly, posing a rischio di soffocamento to children under 3 years of age. Keep unassembled parts away from young children.
• Recommended for toddlers aged 2-4 years.
• Maximum weight limit: 35 lbs.
• Prima di ogni utilizzo, assicurarsi che tutte le parti siano ben fissate.
• Use on flat, level surfaces away from traffic, stairs, and steep inclines.

Contenuto della confezione

Verify all components are present before beginning assembly. Refer to the included printed instruction sheet for a detailed parts list.

• Main body/chassis
• Front wheel with pedals
• Ruote posteriori (2)
• Manubrio
• Stelo dell'asse
• Fasteners and caps
• Foglio di adesivi

Istruzioni di montaggio

Adult assembly is required. You will need a hammer and a screwdriver (not included) for assembly. Please follow the steps below carefully.

1. Installazione delle ruote posteriori

Insert the axle rod through the designated holes in the main body. Secure the rear wheels onto the axle rod, ensuring they are firmly in place. Use the provided caps and tap gently with a hammer if needed to secure.

2. Installazione dei pedali

Attach the pedals to the front wheel assembly. Ensure they fit snugly and are securely fastened. Tap into place with a hammer if necessary.

3. Costruzione del telaio

Connect the front fork assembly (with the front wheel and pedals) to the main body of the ride-on. Align the components and secure them using the provided screws. Do not overtighten.

4. Attaching Handlebars

Place the handlebars onto the steering column. Secure them with the appropriate fasteners, ensuring they are stable and allow for smooth steering. Do not overtighten.

5. Applicazione degli adesivi

Personalize your ride-on by applying the Frozen 2 character graphics stickers as desired. Ensure surfaces are clean and dry before application for best adhesion.

Immagine: Lato view of the assembled Disney Frozen 2 Fly Wheels 10 inch Junior Cruiser Ride-On.

Istruzioni per l'uso

The Disney Frozen 2 Fly Wheels Junior Cruiser is designed for young riders to enjoy. Its low center of gravity and easy-grip handlebars provide stability and control.

• equitazione: Children can propel the ride-on by pedaling with their feet or by pushing off the ground.
• Effetti sonori: Press the push button located on the handlebars to activate exhilarating sounds and tunes.

Manutenzione

• Regularly inspect all fasteners and connections to ensure they are tight and secure.
• Clean the ride-on with a damp panno e sapone neutro. Evitare prodotti chimici aggressivi.
• Store the ride-on in a dry place away from direct sunlight to prevent material degradation.

Risoluzione dei problemi

• Parti sciolte: If any parts become loose, re-tighten them immediately.
• Sound effects not working: Controllare che le batterie siano installate correttamente e abbiano una carica sufficiente. Sostituire le batterie se necessario.
• Difficulty steering/pedaling: Ensure all assembly steps were followed correctly and no parts are obstructed.

Specifiche

• Dimensioni del prodotto: 23.7 a L x 14.92 in W x 14.8 in H
• Peso dell'articolo: 5.04 libbre
• Numero modello articolo: 600251-2
• Età consigliata dal produttore: 24 mesi - 5 anni
• Limite di peso: 35 libbre
• Dimensioni ruota anteriore: 10 pollici

Immagine: Diagramma delle dimensioni del prodotto.

Assistenza clienti

For missing or broken parts, or any other inquiries, please contact customer service.

• Schylling Customer Service: Numero di telefono: 800-541-2929