Came VER PLUS - VER10DMS 24V Garage Door Automation Kit User Manual

1. Introduzione

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Came VER PLUS - VER10DMS 24V Garage Door Automation Kit. This system is designed to automate sectional and up-and-over garage doors, offering enhanced convenience and security. Please read this manual thoroughly before proceeding with installation or operation to ensure proper functioning and safety.

2. Informazioni sulla sicurezza

Istruzioni importanti per la sicurezza:

• L'installazione deve essere eseguita da personale qualificato nel rispetto delle normative locali in materia di elettricità e sicurezza.
• Scollegare l'alimentazione prima di eseguire qualsiasi intervento di manutenzione o riparazione.
• Tenere bambini e animali domestici lontani dall'area della porta del garage, soprattutto durante il funzionamento.
• Do not operate the door if any part of the system is damaged or malfunctioning.
• Ensure all safety devices (e.g., photocells) are correctly installed and functioning.
• The emergency release mechanism should be accessible and understood by all users.
• This product is designed for garage door automation only. Do not use for other purposes.

3. Contenuto della confezione

Verifica che tutti i componenti elencati di seguito siano presenti nel tuo pacchetto:

• 1x 801MV-0010 VER10DMS Automation Unit: Complete with control panel and encoder for sectional and up-and-over doors.
• 1x AF43S Radio Frequency Board: Plug-in board for radio communication.
• 1x 806TS-0121 TOPD4RBS Transmitter: Rolling code, dual-frequency, quad-channel remote control (blue).
• 1x TOP-A433N Antenna: Tuned 433 MHz antenna.
• 1x Antenna Cable.

Immagine 1: Passoview of the Came VER PLUS - VER10DMS 24V Garage Door Automation Kit components.

4. Configurazione e installazione

The installation process requires careful attention to detail. It is recommended that installation be carried out by a professional.

4.1 Mounting the Automation Unit

• Fix the automation unit directly onto the transmission guide of your garage door. Ensure it is securely fastened and aligned.
• The system operates on 24V DC, ensuring enhanced safety and reliability.

4.2 collegamenti elettrici

• The electronic board features separate terminal blocks to facilitate easy and organized wiring.
• Connect the power supply, motor, and safety accessories according to the wiring diagram provided in the full technical manual (not included here).
• Install the AF43S radio frequency board into its designated slot on the control unit.
• Connect the TOP-A433N antenna using the provided antenna cable to optimize remote control signal reception.

4.3 Configurazione iniziale

• Use the external display buttons on the control unit to navigate through the installation and diagnostic phases.
• The system supports memorization of up to 250 different users. Refer to the full manual for programming user remotes.
• The integrated radio decoding supports Rolling code and Key Code (Twin) for secure communication.
• For RIO System 2.0 wireless safety accessories, use the 806SS-0040 accessory for management.
• CAME keypads can be managed via the R800 board, and transponder selectors can be connected using the R700 accessory.
• The system is prepared for the CAME KEY accessory and cloud connection via CAME Connect for advanced features.

5. Istruzioni per l'uso

5.1 Funzionamento standard

• To open or close the garage door, press the corresponding button on your 806TS-0121 TOPD4RBS remote transmitter.
• The door will move smoothly along the silent and reliable belt or chain sliding guides.
• Pressing the button again during operation will stop the door. A subsequent press will reverse its direction.

5.2 Operazione di emergenza

• In caso di mancanza di correntetage, the system is designed for emergency operation.
• Locate the external cord release mechanism. Pull the cord to disengage the motor and manually open or close the garage door. This mechanism is applicable to the door's handle-lock system.
• Ensure the emergency release is re-engaged once power is restored or manual operation is no longer needed.

6. Manutenzione

Regular maintenance ensures the longevity and safe operation of your garage door automation system.

• Mensile: Inspect the garage door's moving parts (springs, cables, rollers, hinges) for wear or damage. Ensure they are properly lubricated.
• Trimestrale: Check the functionality of safety features, such as photocells and the auto-reverse mechanism. The door should reverse if it encounters an obstruction.
• Annualmente: Have the system inspected by a qualified technician. Check all electrical connections for tightness and signs of corrosion.
• Keep the automation unit and guides clean and free from debris.
• Do not attempt to repair electrical components yourself. Contact a qualified technician.

7. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti incontrare. Per problemi più complessi, consulta un tecnico professionista.

8. Specifiche

9. Garanzia e supporto

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or visit the official Came websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Official Came Websito: www.come.com