Cabletech UCH0198-2 Full Motion TV Wall Mount Instruction Manual

1. Introduzione

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Cabletech UCH0198-2 Full Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed to securely hold flat-panel or curved LED televisions ranging from 32 to 55 inches, with a maximum weight capacity of 35 kg (77 lbs).

2. Informazioni importanti sulla sicurezza

• Capacità di peso: Non superare la capacità di peso massima di 35 kg (77 libbre). Il superamento di questo limite può causare gravi lesioni o danni materiali.
• Dimensioni dello schermo: This mount is designed for TVs between 32 and 55 inches. While some larger TVs may fit VESA patterns, ensure they do not exceed the weight limit.
• Compatibilità VESA: Verify your TV's VESA mounting pattern is compatible with the mount's supported patterns (75x75, 100x100, 100x150, 150x100, 150x150, 200x100, 100x200, 300x200, 300x300, 400x200, 400x300, 400x400).
• Struttura della parete: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. For wood stud installation, ensure studs are solid. For concrete or brick walls, use appropriate anchors (not always included). Consult a professional installer if unsure about your wall's integrity.
• Utensili: Utilizzare strumenti adeguati per l'installazione. Indossare sempre occhiali protettivi.
• Montaggio: Do not attempt to install this product alone if the TV is heavy. Two or more people are recommended for safe installation.
• Bambini: Tenere lontani i bambini durante l'installazione. Le piccole parti potrebbero rappresentare un rischio di soffocamento.
• Danno: Non installare se qualche componente risulta mancante o danneggiato. Contattare l'assistenza clienti per la sostituzione dei componenti.

3. Contenuto della confezione

Please check to ensure all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Montaggio piastra a parete
• Bracci per supporto TV (2x)
• Kit di montaggio (viti varie, rondelle, distanziali per TV e parete)
• Wall Anchors (for concrete/brick, if included)
• Livello
• Manuale di istruzioni

Figura 1: Fronte view of the wall mount components.

4. Specifiche del prodotto

5. Configurazione e installazione

Before you begin, ensure you have all necessary tools and have read the safety information. Two people are recommended for installation.

5.1 Strumenti necessari (non inclusi)

• Matita
• Stud Finder (per pareti con montanti in legno)
• Drill with appropriate drill bits (e.g., 10mm for concrete, 5.5mm for wood studs)
• Chiave a bussola o chiave regolabile
• Cacciavite con testa Phillips
• Nastro di misurazione
• Occhiali di sicurezza

5.2 Fissaggio delle staffe TV al televisore

1. Posizionare con cautela il televisore a faccia in giù su una superficie morbida e pulita per evitare di danneggiare lo schermo.
2. Identifica i fori di montaggio VESA sul retro del televisore.
3. Select the correct diameter and length screws from the hardware kit that fit your TV's mounting holes. Use washers and spacers if necessary to ensure the screws do not penetrate too deeply or leave the bracket loose.
4. Attach the two vertical TV bracket arms to the back of your TV using the selected screws. Ensure the hooks on the bracket arms are facing upwards (or towards the top of the TV) and are level with each other. Do not overtighten.

5.3 Mounting the Wall Plate to the Wall

Figure 2: Cabletech UCH0198-2 wall mount in extended position.

1. Determinare la posizione di montaggio: Decide on the desired height for your TV. Mark the center point on the wall.
2. Individuare i montanti (per pareti con montanti in legno): Use a stud finder to locate the edges and center of two adjacent wood studs. The wall plate must be mounted to at least two studs for secure installation.
3. Posizione piastra a muro: Hold the wall plate against the wall at your desired height and center. Use a level to ensure it is perfectly horizontal. Mark the drilling locations through the holes on the wall plate.
4. Praticare i fori pilota:
   • Per Montanti in legno: Drill pilot holes using a 5.5mm drill bit to a depth of approximately 60mm.
   • Per Pareti in cemento/mattoni solidi: Drill pilot holes using a 10mm drill bit to a depth of approximately 60mm. Insert the concrete anchors into the drilled holes until they are flush with the wall surface.
5. Fissare la piastra a muro: Align the wall plate with the drilled holes. Secure it to the wall using the lag bolts and washers provided in the hardware kit. Tighten all bolts firmly, but do not overtighten.

5.4 Appendere la TV

1. With assistance, carefully lift the TV (with brackets attached) and hook the TV bracket arms onto the wall plate.
2. Ensure the TV is securely seated on the wall plate. The safety screws or locking mechanisms on the bottom of the TV bracket arms should be engaged to prevent accidental dislodging.
3. Verificare delicatamente la stabilità del televisore montato prima di riposizionarloasincompletamente.

6. Istruzioni per l'uso (Regolazioni)

Your Cabletech UCH0198-2 mount offers various adjustments for optimal viewing.

6.1 Extending and Retracting the TV

Figure 3: Wall mount extended, showing adjustable distance from wall.

• Gently pull or push the TV to extend it away from the wall (up to 400mm) or retract it closer to the wall (minimum 78mm).
• Assicurarsi che i cavi non vengano schiacciati o tirati durante il movimento.

6.2 Tilting the TV

• The mount allows for a tilt range of 0° to -20° (downwards).
• Loosen the tilt adjustment knobs or bolts on the TV bracket arms.
• Regolare l'inclinazione del televisore all'angolazione desiderata.
• Retighten the knobs/bolts to secure the TV in position.

6.3 Swiveling the TV (Horizontal Adjustment)

• The articulating arm allows you to swivel the TV horizontally to achieve various viewangoli di inclinazione.
• Gently push or pull the side of the TV to rotate it left or right.
• The mount also features a small horizontal level adjustment of +3° to -3° to correct for minor leveling issues after installation. This is typically adjusted by loosening specific bolts on the TV plate, leveling, and retightening. Refer to the detailed diagrams for specific adjustment points.

6.4 Gestione dei cavi

• The mount includes a cable winder or clips to help organize and route cables along the articulating arm.
• Secure cables to prevent them from dangling or getting caught during TV movement. Ensure enough slack is provided for full range of motion.

7. Manutenzione

• Pulizia: Pulire il supporto con un panno morbido e asciutto. Non utilizzare detergenti abrasivi o solventi.
• Controlli periodici: Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati e sicuri. Serrarli nuovamente se necessario.
• Movimento: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with painted surfaces.

8. Risoluzione Dei Problemi

9. Garanzia e assistenza clienti

This Cabletech UCH0198-2 TV Wall Mount comes with a manufacturer's warranty of 2 anni dalla data di acquisto.

For warranty claims, technical assistance, or if you have any questions regarding the installation or operation of your product, please contact Cabletech customer support through your retailer or the official Cabletech website. Please have your model number (UCH0198-2) and proof of purchase ready when contacting support.