Clore Automotive Jump-N-Carry JNC550A Jump Starter with Air Compressor User Manual

Introduzione

The Clore Automotive Jump-N-Carry JNC550A is a multi-function jump start system designed for reliable vehicle starting and tire inflation. It features exclusive Clore PROFORMER battery technology, engineered to deliver high peak amps, extended cranking power, and a long service life. This unit also includes an integrated air compressor for tire maintenance and USB output for charging small electronic devices.

Cosa c'è nella scatola

Image: The JNC550A unit, a JNC350 Charging Cable, and an ESA1 12V Cable are included in the box.

• (1) JNC550A Jump Starter: The main unit with integrated air compressor and power outputs.
• (1) JNC350 Charging Cable: For recharging the internal battery of the jump starter.
• (1) ESA1 12V Cable: For connecting to a 12V power source.

Impostare

Carica iniziale

Before first use, fully charge the JNC550A unit. Connect the provided JNC350 Charging Cable to the unit's charging port and plug it into a standard wall outlet. The unit features an automatic charging system. Monitor the digital display for battery status. A full charge ensures optimal performance and extends battery life.

Master ON/OFF Switch

Immagine: Un dettaglio view of the JNC550A control panel, highlighting the master ON/OFF switch, digital display, and various ports.

Locate the master ON/OFF switch on the unit's control panel. This switch disables the unit during storage and transport to prevent accidental discharge or operation. Ensure the unit is in the 'OFF' position when not in use or when being transported.

Istruzioni per l'uso

Avviamento con salto di un veicolo

Image: The JNC550A jump starter positioned on a vehicle's engine bay, with its heavy-duty clamps connected to the car battery terminals.

1. Ensure the JNC550A's master ON/OFF switch is in the 'OFF' position.
2. Collegare il positivo rosso (+) clamp to the positive (+) terminal of the vehicle's discharged battery.
3. Collegare il negativo nero (-) clamp to a solid, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines.
4. Turn the JNC550A's master ON/OFF switch to the 'ON' position.
5. Tentare di avviare il veicolo. Se il veicolo non si avvia immediatamente, attendere qualche minuto prima di riprovare.
6. Once the vehicle starts, turn the JNC550A's master ON/OFF switch to the 'OFF' position.
7. Scollegare il negativo nero (-) clamp prima, poi il rosso positivo (+) clamp.
8. Conservare il clamps securely in their designated holders on the unit.

Utilizzo del compressore d'aria

Image: The JNC550A unit placed next to a car tire, with the air hose attached to the tire's valve stem for inflation.

1. Ensure the JNC550A's master ON/OFF switch is in the 'ON' position.
2. Uncoil the air hose from the unit.
3. Securely attach the air hose chuck to the valve stem of the tire or inflatable item.
4. Accendere l'interruttore del compressore d'aria.
5. Monitor the integrated air gauge for the desired pressure.
6. Once the desired pressure is reached, turn off the air compressor switch.
7. Disconnect the air hose chuck from the valve stem and recoil the hose.

Charging Electronic Devices (USB Output)

The JNC550A features a 5V/2.4A USB output port for charging small electronic devices such as smartphones and tablets.

1. Ensure the JNC550A's master ON/OFF switch is in the 'ON' position.
2. Plug your device's USB charging cable into the USB output port on the JNC550A.
3. Collega l'altra estremità del cavo al tuo dispositivo elettronico.
4. Il dispositivo dovrebbe iniziare a caricarsi.

Using the LED Task Light

The unit includes an LED task light for illumination in low-light conditions, which can also function as a roadside warning light.

1. Ensure the JNC550A's master ON/OFF switch is in the 'ON' position.
2. Press the light button to turn on the LED task light.
3. Press the button again to cycle through different light modes, including an emergency flashing capability.
4. Press the button a final time to turn off the light.

Manutenzione

To ensure the longevity and optimal performance of your JNC550A, regular maintenance is recommended:

• Ricarica: Recharge the unit after each use, especially after jump starting or extended air compressor use. For prolonged storage, recharge the unit every 30-60 days to maintain the internal battery's health.
• Pulizia: Keep the unit clean and free of dirt, dust, and moisture. Use a dry cloth to wipe down the exterior.
• Cavo e Clamp Ispezione: Periodically inspect the heavy-duty cables and clampper eventuali segni di danni, corrosione o usura. Sostituire se necessario.
• Magazzinaggio: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the master ON/OFF switch is in the 'OFF' position during storage.

Risoluzione dei problemi

Specifiche

Image: The JNC550A unit with its approximate dimensions indicated.

• Modello: JNC550A
• Picco Amps: 1100 Amps
• Avviamento Amps: 325 Amps
• Tipo di batteria: 18Ah Clore PROformer (Sealed, non-spillable lead acid)
• Voltage: 12 Volt (CC)
• Compressore d'aria: 120 PSI with 24-inch braided air hose and air gauge
• Uscita USB: 5V/2.4A
• Dimensioni del prodotto: 8"P x 12"L x 12.8"A
• Peso dell'articolo: 22.9 libbre
• Esterno: Drop-resistant housing with rubberized base
• Tipo di adattamento automobilistico: Vestibilità universale

Video ufficiale del prodotto

Garanzia e supporto

For warranty information, technical support, or service inquiries regarding your Clore Automotive Jump-N-Carry JNC550A, please refer to the documentation included with your product or visit the official Clore Automotive website. Ensure you have your model number (JNC550A) and purchase details available when contacting support.