Avaya J100 Wireless Module (700512402) User Manual

1. Introduzione

The Avaya J100 Wireless Module (model 700512402) is an optional hardware accessory designed to enhance the connectivity of compatible Avaya J129, J179, and K155 IP Phones. This module provides seamless Wi-Fi and Bluetooth capabilities, allowing for greater flexibility in phone placement and headset usage.

This manual provides essential information for the proper installation, operation, and maintenance of your J100 Wireless Module. Please read these instructions carefully before proceeding with installation or use.

Image 1: Avaya J100 Wireless Module. This image displays the compact design of the module, showing its connectors and casing.

2. Informazioni sulla sicurezza

• Always disconnect the IP Phone from its power source before installing or removing the J100 Wireless Module.
• Handle the module with care to avoid damage to its electronic components.
• Non esporre il modulo a umidità, temperature estreme o luce solare diretta.
• Ensure proper ventilation around the IP Phone after installation.
• Only use the module with compatible Avaya IP Phones as specified.

3. Contenuto della confezione

Verifica che il pacco contenga i seguenti articoli:

• Avaya J100 Wireless Module (700512402)
• Quick Start Guide or Documentation (if included)

If any items are missing or damaged, please contact your vendor or Avaya support.

4. Configurazione e installazione

Follow these steps to install the Avaya J100 Wireless Module into your compatible Avaya IP Phone:

1. Spegni il telefono: Disconnect the power cable from your Avaya J129, J179, or K155 IP Phone.
2. Individuare lo slot del modulo: Identify the designated slot for the wireless module on the back or side of your IP Phone. This slot is typically covered by a removable panel.
3. Rimuovi la copertura: Carefully remove the cover panel from the module slot. This may involve gently prying it off or unscrewing a small screw, depending on your phone model.
4. Inserisci modulo: Align the Avaya J100 Wireless Module with the slot and gently insert it until it is fully seated. Ensure the connectors are properly aligned to avoid damage.
5. Secure Module (if applicable): If your phone model requires it, secure the module with any screws that were removed from the cover panel.
6. Sostituisci la copertura: Reattach the cover panel to the module slot.
7. Power On Phone: Reconnect the power cable to your IP Phone. The phone will power on and automatically detect the newly installed J100 Wireless Module.

Once the phone powers on, it should recognize the module, and you will be able to configure Wi-Fi and Bluetooth settings through the phone's menu.

5. Istruzioni per l'uso

5.1. Connettività Wi-Fi

To connect your Avaya IP Phone to a Wi-Fi network:

1. Access the phone's menu and navigate to the "Settings" or "Network" options.
2. Select "Wi-Fi" or "Wireless Settings."
3. Enable Wi-Fi if it is not already active.
4. The phone will scan for available Wi-Fi networks. Select your desired network from the list.
5. Enter the Wi-Fi password (if required) using the phone's keypad.
6. Confirm the connection. The phone should now be connected to the Wi-Fi network.

5.2. Connettività Bluetooth

To pair a Bluetooth headset or other device with your Avaya IP Phone:

1. Ensure your Bluetooth device is in pairing mode (refer to your device's manual for instructions).
2. On your Avaya IP Phone, navigate to the "Settings" or "Bluetooth" menu.
3. Enable Bluetooth if it is not already active.
4. The phone will scan for nearby Bluetooth devices. Select your device from the list.
5. If prompted, enter the pairing code (usually "0000" or "1234" for headsets, or as specified by your device).
6. Confirm the pairing. Once paired, your Bluetooth device should be ready for use with the phone.

Nota: Some Bluetooth headsets may enter a power-saving mode when not in use, which could lead to a slight delay in call alerts. This is normal behavior for certain devices.

6. Manutenzione

• Pulizia: Use a soft, dry cloth to clean the exterior of the module and the phone. Do not use liquid cleaners or aerosols.
• Magazzinaggio: If removing the module for extended periods, store it in a cool, dry place, away from direct sunlight and extreme temperatures.
• Aggiornamenti del firmware: Ensure your Avaya IP Phone's firmware is up to date, as this can improve module performance and compatibility. Refer to your phone's documentation or Avaya support for firmware update procedures.

7. Risoluzione Dei Problemi

8. Specifiche

• Numero modello: 700512402
• Marca: Avaya
• Dispositivi compatibili: Avaya J129, Avaya J179, Avaya K155 IP Phones
• Interfaccia hardware: Bluetooth, Ethernet (via phone connection)
• Protocollo di collegamento dati: Bluetooth, Ethernet (via phone connection)
• Velocità di trasferimento dati: Up to 100 Megabits Per Second (via Ethernet, module provides wireless)
• Peso dell'articolo: Circa 1.13 once (32 grammi)
• Dimensioni della confezione: Circa 4.96 x 3.11 x 1.73 pollici
• Primo disponibile: 18 luglio 2019

9. Garanzia e supporto

For warranty information, please refer to the documentation provided with your original Avaya IP Phone or contact your authorized Avaya reseller. Avaya provides technical support for its products. For assistance, visit the official Avaya support websito o contattare il loro servizio clienti.

You can find more information and support resources on the official Avaya websito: www.avaya.com/support