1. Prodotto finitoview
The INCLAKE License Plate Backup Camera is designed to enhance vehicle safety by providing a clear rear view. It features upgraded infrared night vision, a wide viewing angle, and a durable waterproof design for universal compatibility with various vehicle types.
Image 1: INCLAKE License Plate Backup Camera with integrated camera and LED lights.
2. Configurazione e installazione
This section outlines the steps for installing your backup camera. Ensure your vehicle's power is off before beginning installation.
2.1. Componenti finitiview
The package includes the license plate camera, power cable, and video extension cable. The camera is designed to fit standard American license plates.
Image 2: Wiring diagram for the backup camera system.
2.2. Istruzioni per il cablaggio
- Connetti alimentazione: Connect the red wire from the camera's power cable to the positive (+) terminal of your vehicle's reversing light (DC 12V). Connect the black wire to a ground-iron part of the vehicle.
- Collega video: Connect the yellow RCA connector from the camera to the video input of your monitor or navigation DVD player.
- Prolunga: Use the provided video extension cable to run the video signal from the camera to the front display unit.
- Compatibilità del segnale: Some monitors may require an additional trigger signal to display the reversing image. Refer to your monitor's manual for specific requirements.
2.3. Guida visiva all'installazione
The following video demonstrates the unboxing and installation process for a similar license plate backup camera, providing a visual aid for setup.
Video 1: Unboxing e conclusioneview of a License Plate Frame Backup Camera.
3. Istruzioni per l'uso
Understand the key features and how to operate your INCLAKE backup camera.
3.1. Visione notturna
The camera features 8 upgraded infrared (IR) lights, providing clearer and more comfortable images in dark environments, significantly improving night vision. Note that the IR LED lights are not visible to the human eye, which is normal operation.
Image 3: Display showing clear night vision from the camera.
Image 4: Illustration of improved night vision with IR lights.
3.2. Wide Viewangolo di ing
The camera offers a 170° wide viewing angle to eliminate blind spots and provide a comprehensive view behind your vehicle. The camera angle can be adjusted by approximately 45° by loosening a screw.
Immagine 5: Ampia viewing angle and adjustable camera lens.
3.3. Parking Guide Lines
The camera can display parking guide lines to assist with reversing. These lines can be toggled on or off by following the procedure shown in the diagram below.
Image 6: Procedure for switching view modes and parking guide lines.
4. Manutenzione
To ensure the longevity and optimal performance of your backup camera, follow these maintenance guidelines:
- Design impermeabile: The camera is IP68 waterproof, protecting it from strong water flow, rain, and car washes. No special waterproofing maintenance is required under normal conditions.
- Materiale durevole: Made of aluminum, the camera is designed to withstand sun exposure and rain. Regularly inspect for any physical damage.
- Pulizia: Pulire periodicamente l'obiettivo della fotocamera con un panno morbido eamp panno per garantire una pulizia chiara viewEvitare detergenti abrasivi.
Image 7: The camera is designed to be 100% waterproof.
5. Risoluzione Dei Problemi
If you encounter issues with your backup camera, refer to the following common solutions:
- Nessun segnale video: Ensure all connections are secure. Check if your radio/monitor supports the camera's signal type (CVBS). Some cameras default to AHD and require a wire to be cut to switch to CVBS.
- IR Lights Not Visible: The infrared (IR) LED lights are not visible to the human eye. If the camera is functioning and providing night vision, this is normal.
- Immagine sfocata o distorta: Check all cable connections for looseness or damage. Ensure the camera lens is clean and free from obstructions.
5.1. Resolving Signal Compatibility (AHD to CVBS)
If your radio or monitor only supports CVBS signals and the camera is defaulting to AHD, you may need to cut a specific wire to change the signal type. The following video demonstrates this procedure:
Video 2: Demonstration of changing the camera signal from AHD to CVBS by cutting the white wire.
6. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Marca | INCLAKE |
| Numero di modello | Backup Camera (B07VHHXFTR) |
| Dimensioni del pacco | 12.87 x 6.73 x 1.77 pollici |
| Peso dell'articolo | 1.59 libbre |
| Tecnologia di visualizzazione | GUIDATO |
| Altre caratteristiche del display | Senza fili |
| Colore | Red IR |
| Produttore | INCLAKE |
| Data prima disponibilità | 23 luglio 2019 |
| Dimensioni dello schermo | 0.33 pollici |
| Dispositivi compatibili | Monitor |
| Tipo di installazione | Montaggio in superficie |
| Voltage | 12 Volt |
| Tecnologia dei sensori ottici | CMOS |
| Tipo di lente | Grandangolo, fisso |
| Angolo reale di View | 170 gradi |
| Tipo di connettore | RCA |
| Dimensioni del sensore ottico | 0.33 pollici |
7. Garanzia e supporto
Warranty information for this product is not provided in the available product data. For support inquiries, please refer to the contact information provided by your retailer or the product manufacturer.