SupplySource 1SP56 Series

Instruction Manual for SupplySource AC/DC Adapter

Model: 1SP56 Series (Compatible with ION iSP56, ISP56RD, iSP56BK Plunge IPX7 Speakers)

Introduzione

This manual provides essential information for the safe and effective use of your SupplySource AC/DC Adapter. This adapter is designed as a replacement power supply and battery charger for various Ion Audio Plunge speaker models, including 1SP56, iSP56, ISP56RD, and iSP56BK Plunge IPX7.

Si prega di leggere attentamente il presente manuale prima di utilizzare il prodotto e di conservarlo per riferimento futuro.

Informazioni sulla sicurezza

Avvisi importanti sulla sicurezza:

  • Ensure the DC output and tip size of this AC adapter are compatible with your device before connecting. Incompatible connections can cause damage.
  • When using the adapter for extended periods, ensure adequate ventilation and maintain appropriate humidity levels. Avoid placing the adapter directly on skin products or flammable surfaces.
  • This product is manufactured with multiple smart features to safeguard against incorrect voltage (IV), short circuits (SC), and internal overheating (IO).
  • Non smontare, modificare o tentare di riparare l'adattatore. Per qualsiasi intervento di assistenza, rivolgersi a personale qualificato.
  • Keep the adapter away from water, excessive heat, and direct sunlight.
  • Unplug the adapter from the power outlet when not in use for prolonged periods.

Prodotto finitoview

The SupplySource AC/DC Adapter is a high-quality replacement power supply designed for reliable performance. It features a robust design and incorporates multiple safety protections.

SupplySource AC/DC Adapter with cable and plug

Figura 1: Davanti view of the SupplySource AC/DC Adapter, showing the main unit, power cable, and the specific connector type for compatible devices.

Diagram showing safety features of the adapter

Figura 2: Illustration highlighting the built-in safety electronics, including protections against overcharge, over voltage, short-circuit, over current, and over temperature.

Lato view of the adapter with cable length indicated

Figura 3: Lato profile of the adapter, demonstrating its compact size and indicating a cable length of approximately 4 feet.

Impostare

  1. Verifica compatibilità: Before connecting, confirm that your device (e.g., Ion Audio Plunge speaker) requires a 20W AC/DC adapter and that the connector tip matches the adapter's output plug.
  2. Connetti al dispositivo: Carefully insert the adapter's output plug into the charging port of your compatible device. Ensure a secure connection.
  3. Collegare alla presa di corrente: Plug the adapter's wall plug into a standard 100-240V AC electrical outlet.
  4. Accensione: Your device should now begin charging or receive power. Some devices may have an indicator light to confirm charging status.

Istruzioni per l'uso

The SupplySource AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable power supply for operating your device or charging its internal battery.

  • The adapter is designed for continuous use, but ensure proper ventilation to prevent heat buildup.
  • Disconnect the adapter from the power outlet and your device when not in use or during electrical storms.

Manutenzione

  • Pulizia: Disconnect the adapter from all power sources and devices before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
  • Magazzinaggio: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. When storing, coil the cable loosely; avoid tight coiling or sharp bends which can damage the wire.
  • Ispezione: Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires, cracked casing, or bent pins. If damage is observed, discontinue use immediately and replace the adapter.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
Il dispositivo non si carica/non si accende.
  • L'adattatore non è collegato correttamente alla presa.
  • L'adattatore non è collegato correttamente al dispositivo.
  • Incompatible adapter/device.
  • Presa di corrente difettosa.
  • Adattatore danneggiato.
  • Ensure adapter is fully inserted into a working power outlet.
  • Verify the adapter's plug is securely connected to your device's charging port.
  • Double-check device specifications for power requirements and connector type.
  • Test the outlet with another known working appliance.
  • Inspect the adapter for visible damage. If damaged, replace it.
L'adattatore risulta caldo durante l'uso.
  • Funzionamento normale (lieve calore).
  • Scarsa ventilazione.
  • Sovraccarico o problema interno.
  • Un leggero calore è normale.
  • Ensure the adapter is in a well-ventilated area, not covered by fabrics or in an enclosed space.
  • If excessively hot or emitting smoke/smell, unplug immediately and discontinue use.

Specifiche

CaratteristicaDettaglio
MarcaSupplySource
Dispositivi compatibiliIon Audio Plunge 1SP56, iSP56, ISP56RD, iSP56BK Plunge IPX7 Speakers
Ingresso volumetage Gamma100-240V AC
Gamma di frequenzaFrequenza 60 Hz
Cosatage20 Watt
Fonte di alimentazioneElettrico con cavo
MaterialeMetallo, Plastica
CertificazioniCE, FCC
Caratteristica specialeTravel (Compact Design)

Garanzia e supporto

This SupplySource AC/DC Adapter comes with a Garanzia di 24 mesi dalla data di acquisto, coprendo i difetti di fabbricazione e i difetti dei materiali in condizioni di normale utilizzo.

For technical support, warranty claims, or any inquiries regarding your product, please contact the seller directly through the platform where the purchase was made. The seller, "Power Supply Source," is best equipped to assist with product-specific questions and support.

© 2024 SupplySource. All rights reserved. Information in this manual is subject to change without notice.