Manuale di istruzioni Pro timer luce LED a canale singolo NICREW

1. Prodotto finitoview

The NICREW Single Channel LED Light Timer Pro is a digital dimmer designed to control 16-30VDC LED lights. It offers three operating modes, including ramp-up/dim-down functions, and supports up to six programmable time points for creating custom lighting cycles. The device features an internal memory to retain settings during power outages.

Image 1: The NICREW Single Channel LED Light Timer Pro, showing the main unit with its input and output cables.

Image 2: A hand holding the compact NICREW Single Channel LED Light Timer Pro, illustrating its size and button layout.

Image 3: The product packaging for the NICREW Single Channel LED Light Timer Pro, displaying the timer unit and included DC plug adapters.

2. Configurazione e installazione

2.1 Compatibilità

This timer is compatible with 16-30VDC LED lights only. It supports up to 4A (maximum 96 watts at 24VDC) and uses standard 2.5mm x 5.5mm or 2.1mm x 5.5mm barrel connectors. Please verify your LED lighting manufacturer's specifications for compatibility.

Image 4: DC Plug Adapters (A: 2.5mm female to 2.1mm male, B: 2.1mm female to 2.5mm male) for ensuring compatibility with various barrel plug sizes.

2.2 Connessione

1. Connect your LED light to the male DC jack on the timer.
2. Connect your power transformer to the female DC plug on the timer.

Image 5: Diagram illustrating the connection process for 2.1mm x 5.5mm and 2.5mm x 5.5mm barrel plugs, including the use of DC plug adapters.

2.3 First Time Setup / Reset

To reset the timer for the first time or after a power cycle, press the IMPOSTATO pulsante (icona dell'ingranaggio) e il ENERGIA button (power icon) simultaneously. Hold them down for 3 seconds until the display resets.

3. Istruzioni per l'uso

3.1 Impostazione dell'ora corrente

1. Premere e tenere premuto il tasto IMPOSTATO button (gear icon) for 3 seconds. The hour digits will begin to flash.
2. Premere il tasto ORA + pulsante per regolare l'ora.
3. Premere il tasto MINUTO - pulsante per regolare i minuti.
4. Premere IMPOSTATO di nuovo per confermare l'ora.

3.2 Choosing an Operating Mode (F1-F3)

The timer offers three modes:

• F1: Straight ON/OFF Mode - Simple on/off functionality without dimming.
• F2: Ramp Mode (15 minutes ramp/oscura) - Gradual increase or decrease in light intensity over 15 minutes.
• F3: Ramp Mode (30 minutes ramp/oscura) - Gradual increase or decrease in light intensity over 30 minutes.

Per selezionare una modalità:

1. Dopo aver impostato l'ora corrente, premere il tasto IMPOSTATO button (gear icon) again. The display will show 'F1', 'F2', or 'F3'.
2. Utilizzare il ORA + or MINUTO - buttons to cycle through the modes.
3. Premere IMPOSTATO per confermare la selezione.

3.3 Programming Time Points (L-01 to L-06)

The timer supports up to 6 separate programming time points (L-01 to L-06) to create custom dawn and dusk effects.

1. After selecting the operating mode, press IMPOSTATO. The display will briefly show 'L-01' and then flash '--:--'.
2. Premere il tasto ENERGIA button (power icon) to activate the L-01 time point.
3. Utilizzare il ORA + E MINUTO - buttons to set your desired time for L-01.
4. Premere IMPOSTATO again to set the light intensity for L-01. The display will show 'L.000' (or similar, indicating intensity).
5. Utilizzare il ORA + or MINUTO - buttons to set the desired light intensity (from 1% to 100%).
6. Premere IMPOSTATO to move to the next time point (L-02). Repeat steps 2-5 for L-02, L-03, and L-04.
7. To skip L-05 and L-06, simply press IMPOSTATO repeatedly until the display returns to the current time.

Image 6: A graph illustrating a programming example for the F2 Ramp Mode, showing light intensity changes over six time points throughout the day.

3.4 Accensione/spegnimento manuale

To manually turn the light on or off, press the ENERGIA button (power icon). When the light is manually turned off, the display will show 'OFF'.

3.5 Adjusting Light Intensity (Manual Mode Only)

When the light is manually turned on (display shows 'ON'), you can adjust its intensity:

1. Premere il tasto ORA + or MINUTO - buttons to directly set the brightness level.
2. Premere il tasto IMPOSTATO button (gear icon) to exit the intensity setting and resume the normal lighting cycle.

4. Manutenzione

To ensure optimal performance and longevity of your NICREW Single Channel LED Light Timer Pro, keep the device clean and dry. Avoid exposing it to excessive moisture or extreme temperatures. Regularly check connections to ensure they are secure.

5. Specifiche

6. Risoluzione Dei Problemi

• Display shows '8.8:8.8' or is unresponsive: This may indicate a need for a reset. Perform the First Time Setup / Reset procedure by pressing IMPOSTATO E ENERGIA contemporaneamente per 3 secondi.
• Light not turning on/off or dimming as programmed: Verify that the correct operating mode (F1, F2, or F3) is selected and that all time points (L-01 to L-06) are programmed correctly. Ensure the timer is not in manual ON/OFF mode.
• Incompatibility with LED light: Confirm that your LED light operates within the 16-30VDC range and uses a standard 2.5mm or 2.1mm barrel connector. Use the provided DC plug adapters if necessary.
• Impostazioni perse dopo lo spegnimentotage: The timer features internal memory to store pre-programmed settings. If settings are lost, ensure the device is properly connected and re-program if needed.

7. Garanzia e supporto

The NICREW Single Channel LED Light Timer Pro comes with a hassle-free 12-month warranty. For any product inquiries, technical assistance, or warranty claims, please contact NICREW customer service. We are committed to providing 24-hour friendly customer service to ensure your satisfaction.