Technical Precision Replacement Light Bulb for REFLECTA B100

Introduzione

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Technical Precision Replacement Light Bulb for REFLECTA B100 fixtures. This product is designed as a direct replacement and is not manufactured by REFLECTA. Please read these instructions thoroughly before use and retain them for future reference.

Informazioni sulla sicurezza

AVVERTIMENTO: Always disconnect power to the fixture before installing, removing, or handling the light bulb to prevent electric shock.
Allow the old bulb to cool completely before removal to avoid burns.
Handle the new bulb by its base or protective packaging to avoid touching the glass directly. Oils from skin can reduce bulb life.
Ensure the bulb is securely screwed into the socket but do not overtighten.
Do not use this bulb in wet locations or where it may be exposed to water unless the fixture is specifically rated for such conditions.
Smaltire le vecchie lampadine secondo le normative locali.
This bulb is for indoor use in compatible fixtures only.

Contenuto della confezione

Al momento dell'apertura del pacco, verificare che tutti gli articoli siano presenti e integri.

2 x Technical Precision Replacement Light Bulbs (Model: B100-AZ-4QQ0-1)

Two Technical Precision replacement light bulbs in packaging

Image: Two Technical Precision replacement light bulbs, packaged together. These bulbs are designed to replace the REFLECTA B100 light bulb.

Configurazione e installazione

Follow these steps to safely install your new replacement light bulb:

Passaggio 1: scollegare l'alimentazione. Locate the power switch or circuit breaker controlling the light fixture and turn it OFF. Confirm the power is off by attempting to turn on the light.
Step 2: Remove Old Bulb. Carefully unscrew the old light bulb from the fixture. If the bulb is hot, allow it to cool before handling.
Step 3: Inspect Fixture. Controllare che la presa della lampada non sia danneggiata o presenta detriti. Assicurarsi che sia pulita e asciutta.
Step 4: Install New Bulb. Remove the new Technical Precision replacement bulb from its packaging. Hold the bulb by its base and gently screw it clockwise into the fixture's socket until it is snug. Do not overtighten.
Fase 5: Ripristinare l'alimentazione. Riaccendere l'alimentazione tramite l'interruttore o il disgiuntore.
Fase 6: Test. Turn on the light switch to confirm the new bulb is functioning correctly.

Operazione

The Technical Precision replacement light bulb operates like a standard incandescent bulb. Once installed and power is restored, simply use the fixture's existing switch to turn the light ON or OFF.

Accensione immediata: This bulb features instant-on capability, providing full brightness immediately upon activation.
Alta efficienza: Designed for high efficiency, contributing to energy savings compared to older bulb technologies.

Manutenzione

Minimal maintenance is required for this light bulb. Follow these guidelines to ensure optimal performance and longevity:

Pulizia: Ensure power is OFF and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Sostituzione: Replace the bulb when it reaches the end of its operational life (approximately 750 hours) or if it fails prematurely. Refer to the "Setup and Installation" section for replacement steps.
Magazzinaggio: If storing spare bulbs, keep them in their original packaging in a cool, dry place to protect them from damage.

Risoluzione dei problemi

If your replacement bulb is not functioning as expected, consider the following:

Problema	Possibile causa	Soluzione
La lampadina non si accende.	Nessuna alimentazione al dispositivo. Lampadina non avvitata correttamente. La lampadina è difettosa. La presa dell'apparecchio è difettosa.	Controllare l'interruttore di alimentazione e l'interruttore automatico. Spegnere l'alimentazione, quindi riavvitare saldamente la lampadina. Try a different, known-good bulb in the same fixture. Test the fixture with a known-good bulb. If it still doesn't work, consult a qualified electrician.
La lampadina sfarfalla.	Collegamento allentato. Interruttore dimmer non compatibile (se applicabile). Voltage fluttuazioni.	Spegnere l'alimentazione, quindi riavvitare saldamente la lampadina. Ensure the fixture is not connected to an incompatible dimmer. This bulb is not specified for dimming. Consult an electrician if flickering persists across multiple bulbs.

Specifiche

Caratteristica	Dettaglio
Marca	Precisione tecnica
Nome del modello	B100-AZ-4QQ0-1
Sostituzione per	REFLECTA B100 Light Bulb
Cosatage	15 Watt
Voltage	130 Volt
Forma della lampadina Dimensioni	T8
Base della lampadina	E14
Caratteristiche speciali	Alta efficienza, accensione istantanea
Vita media	750 ore
Materiale	Bicchiere
Conteggio unità	2.0 Conteggio
Componenti inclusi	Pezzo di ricambio

Garanzia e supporto

Technical Precision strives to provide high-quality replacement parts. While specific warranty details are not provided in this manual, please contact your retailer or the manufacturer directly for any product support or warranty inquiries.

For further assistance, please visit the Technical Precision store on Amazon or contact their customer service through the platform where the product was purchased.

Note: This bulb is a replacement part and is not manufactured by REFLECTA.

Technical Precision B100-AZ-4QQ0-1