rockspace 1200Mbps WiFi Repeater (AC1200) Instruction Manual

1. Introduzione e oltreview

The rockspace 1200Mbps WiFi Repeater (AC1200) is designed to extend your existing Wi-Fi network coverage, eliminating dead zones and providing a stable, high-speed internet connection throughout your home or office. This dual-band extender supports both 2.4GHz and 5GHz frequencies, offering versatile connectivity for various devices.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your rockspace WiFi Repeater to ensure optimal performance.

Immagine: Frontale view of the rockspace AC1200 WiFi Repeater, highlighting its 1200Mbps dual-band capability (2.4G/5G) and LED indicators for Signal, WPS, and Power.

2. Caratteristiche del prodotto

• Eliminate WiFi Dead Zone: Extends Wi-Fi coverage up to 2640 sq ft, ensuring signal strength even through walls, covering bedrooms, floors, restrooms, garages, basements, and gardens.
• Super High Speed & Stable Signal: Features dual-band technology (300Mbps for 2.4GHz, 867Mbps for 5GHz) for higher penetration and high-speed networking, ideal for smart homes, large file transfers, HD videos, and online gaming.
• Porta Gigabit: Provides a stable wired connection to your router, preventing Wi-Fi speed drops and delivering seamless internet speed. Note: Extenders improve coverage, not direct speed.
• One-Press Setup: Simplifies network extension with a WPS button for instant setup (within 8 seconds) or via a web browser on your smart devices.
• Safety Network Accessory: Supports WPA and WPA2 security protocols to maximize network security, protect personal Wi-Fi, and prevent unauthorized access.

Image: Illustration demonstrating how the rockspace WiFi Extender expands coverage throughout a home, eliminating dead zones.

3. Contenuto della confezione

Assicurati che tutti gli articoli siano presenti nel pacco:

• 1 x rockspace 1200Mbps WiFi Repeater (AC1200)
• Antenne integrate
• Quick Installation Guide (refer to this manual for detailed steps)

4. Istruzioni per l'installazione

4.1. Setup via WPS Button (Recommended for quick setup)

1. Collegare: Plug the rockspace WiFi Repeater into a power outlet near your existing router. Wait for the PWR indicator light to turn solid blue.
2. Premere WPS sull'Extender: Press the WPS button on the rockspace WiFi Repeater. The WPS indicator light will start blinking.
3. Premere WPS sul router: Entro due minuti, premi il pulsante WPS sul tuo router Wi-Fi esistente.
4. Collegare: The WPS and Signal indicator lights on the repeater will turn solid blue, indicating a successful connection.

Image: Visual guide for one-click WPS setup, showing pressing the WPS button on the router and then on the extender.

4.2. Configurazione tramite Web Browser (metodo alternativo)

1. Collegare: Plug the rockspace WiFi Repeater into a power outlet. Wait for the PWR indicator light to turn solid blue.
2. Connettiti al Wi-Fi dell'Extender: On your computer or smartphone, connect to the Wi-Fi network named "rockspace_EXT". Do not connect to your main router's Wi-Fi at this step.
3. Aprire Web Navigatore: Aprire un web browser (ad esempio, Chrome, Firefox, Safari) e tipo re.rockspace.local or 192.168.0.254 nella barra degli indirizzi.
4. Login: Create a new login password for the extender when prompted.
5. Seleziona rete: The extender will scan for available Wi-Fi networks. Select your existing home Wi-Fi network (your router's network) from the list.
6. Inserisci la password: Inserisci la password della tua rete Wi-Fi domestica esistente.
7. Confermare: The extender will now extend your network. You may see new Wi-Fi networks with "_EXT" or "_5GEXT" appended to your original network name.

Image: A hand holding a smartphone displaying Wi-Fi settings, showing how to connect to the extender's default network for webconfigurazione basata su.

4.3. Optimal Placement After Setup

After successful setup, relocate the extender to an optimal location. The ideal spot is halfway between your main router and the Wi-Fi dead zone. Ensure the Signal LED light on the extender is solid blue, indicating a strong connection to your main router.

Image: A visual guide on how to properly relocate the extender for maximum coverage, showing correct and incorrect placements relative to the router and dead zones.

5. Istruzioni per l'uso

Once the rockspace WiFi Repeater is set up, it will automatically extend your Wi-Fi network. Your devices can now connect to the extended network for improved signal strength and coverage.

• Dispositivi di connessione: On your Wi-Fi enabled devices (smartphones, tablets, laptops, smart TVs), scan for available Wi-Fi networks. You will see your original network name, and new networks ending with "_EXT" or "_5GEXT". Connect to these extended networks using your original Wi-Fi password.
• Utilizzo della porta Ethernet: The Gigabit Ethernet port allows you to connect a wired device (e.g., gaming console, smart TV, desktop computer) to the extender for a stable, high-speed connection. This is particularly useful for devices that require consistent bandwidth or are not Wi-Fi enabled.
• Regolazione dell'antenna: The two external antennas can be adjusted to optimize signal reception and transmission. Experiment with different angles to find the best coverage for your specific environment.

Image: Illustration of the dual-band Wi-Fi extender providing stable connections to various devices like laptops, tablets, and smartphones.

6. Manutenzione e buone pratiche

• Posizionamento ottimale: As mentioned in setup, ensure the extender is placed where it receives a strong signal from your main router (solid blue Signal LED) and can effectively cover the desired area. Avoid placing it in corners or behind large obstructions.
• Evitare interferenze: Importante: Please avoid putting the extender near Bluetooth devices and large electrical appliances such as microwave ovens or refrigerators. The Wi-Fi signal can be easily interfered with by these devices.
• Riavvii regolari: Periodically restarting your extender (unplugging it for 10 seconds and plugging it back in) can help clear its memory and improve performance.
• Aggiornamenti del firmware: Check the rockspace official website for any available firmware updates. Keeping your device's firmware up-to-date ensures optimal performance, security, and compatibility.
• Pulizia: Mantenere il dispositivo pulito e privo di polvere. Utilizzare un panno morbido e asciutto per la pulizia. Non utilizzare detergenti liquidi o spray.

7. Risoluzione Dei Problemi

Problemi comuni e soluzioni:

Nessuna alimentazione / Spie luminose spente:

Ensure the extender is securely plugged into a working power outlet. Try a different outlet to rule out power supply issues.

Signal LED is Red or Off:

This indicates a weak or no connection to your main router. Relocate the extender closer to your main router. Ensure there are no major obstructions (thick walls, large appliances) between the extender and the router. Re-run the setup process if necessary.

Cannot Connect to "rockspace_EXT" during Web Impostare:

Make sure your mobile data is turned off on your smartphone. Ensure you are connecting directly to the extender's default Wi-Fi network. Try restarting the extender and your device.

Extended Network Not Visible or Slow:

Verify the extender is successfully connected to your main router (solid blue Signal LED). Ensure optimal placement. Check for interference from other electronic devices. Try restarting both your router and the extender.

Errore di configurazione WPS:

Ensure you press the WPS button on both the extender and the router within the two-minute window. Some routers may have a different WPS activation method or a longer delay. If WPS continues to fail, use the web metodo di configurazione del browser.

Password di accesso dimenticata per Web Gestione:

You will need to perform a factory reset on the extender. See the "Resetting the Extender" section below.

Reimpostazione dell'Extender:

If you encounter persistent issues or forget your login password, you can perform a factory reset:

1. With the extender powered on, locate the "RESET" pinhole button on the device (usually near the Ethernet port).
2. Use a paperclip or a needle-shape object to press and hold the "RESET" button for approximately 8-10 seconds.
3. Release the button when all indicator lights blink. The extender will reboot with factory default settings.
4. After resetting, you will need to reconfigure the extender using either the WPS or web metodo di configurazione del browser.

8. Specifiche

9. Garanzia e supporto

For warranty information and technical support, please refer to the official rockspace webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Supporto online: Visit the rockspace official websito per FAQ, guide alla risoluzione dei problemi e download di firmware.

Assistenza clienti: Fare riferimento alla confezione del prodotto o al sito ufficiale website for contact details (phone, email, live chat).