1. Introduzione
Grazie per l'acquistoasing the JJRC Q39 HIGHLANDER 1:12 4WD RC Desert Truck. This high-performance remote control vehicle is designed for off-road adventures, offering excellent speed, control, and durability. Equipped with a powerful motor and high-torque servo, it is capable of climbing slopes, accelerating rapidly, drifting, and braking effectively on various terrains. Please read this manual thoroughly before operating the vehicle to ensure safe and optimal performance.

The JJRC Q39 HIGHLANDER 1:12 4WD RC Desert Truck, showcasing its dynamic capabilities on a dusty track.
2. Informazioni sulla sicurezza
- Utilizzare sempre il camion RC in spazi aperti, lontano da persone, animali domestici e ostacoli.
- Do not operate near roads, water, or high-voltage linee elettriche.
- Tenere mani, capelli e indumenti larghi lontani dalle parti in movimento.
- Per gli utenti di età inferiore ai 14 anni si raccomanda la supervisione di un adulto.
- Ensure the battery is fully charged before use and disconnect it after operation.
- Do not attempt to modify the vehicle or its components, as this may void the warranty and cause damage.
- Quando non vengono utilizzati, conservare il veicolo e il telecomando in un luogo fresco e asciutto.
3. Contenuto della confezione
Il pacchetto in genere include i seguenti articoli:
- JJRC Q39 HIGHLANDER RC Desert Truck
- Trasmettitore di controllo remoto da 2.4 GHz
- Batteria LiPo da 7.4 V 1500 mAh
- Cavo di ricarica USB
- Chiave a croce
- Manuale d'uso
4. Impostazione
4.1 Ricarica della batteria
- Collegare la batteria LiPo da 7.4 V 1500 mAh al cavo di ricarica USB.
- Plug the USB charging cable into a suitable USB power adapter (e.g., computer USB port, phone charger).
- La spia di carica indicherà lo stato di carica. Una ricarica completa richiede in genere circa 2.5 ore.
- Non lasciare la batteria incustodita durante la carica.

The 7.4V 1500mAh LiPo battery, providing approximately 15 minutes of run time with a 2.5-hour charging duration.
4.2 Truck Battery Installation
- Locate the battery compartment on the RC truck.
- Aprire il coperchio del vano batterie.
- Carefully insert the fully charged 7.4V 1500mAh LiPo battery into the compartment.
- Connect the battery connector to the truck's power connector.
- Chiudere saldamente il coperchio del vano batterie.
4.3 Installazione della batteria del telecomando
- Individuare il vano batteria sul retro del telecomando da 2.4 GHz.
- Aprire il coperchio del vano batterie.
- Insert three (3) 1.5V AA batteries (not included), ensuring correct polarity (+/-).
- Chiudere saldamente il coperchio del vano batterie.

The 2.4GHz remote control, showing the indicator light, servo fine-tuning, power light, turn left/right wheel, forward/backward trigger, and battery compartment for three AA batteries.
4.4 Pairing the Remote Control and Truck
- Turn on the RC truck using the power switch. The truck's indicator light will flash.
- Accendere il telecomando. La spia luminosa del telecomando lampeggerà.
- Wait a few seconds for the remote control and truck to automatically pair. Once paired, both indicator lights will become solid.
- Se l'associazione non riesce, spegnere entrambi i dispositivi e ripetere i passaggi.
5. Operating the RC Truck
5.1 Funzioni del telecomando
- Trigger avanti/indietro: Pull the trigger to move forward, push it to move backward.
- Turn Left/Right Wheel: Rotate the wheel left to turn the truck left, rotate right to turn right.
- Servo Fine-tuning: Use this dial to adjust the steering trim if the truck does not drive straight when the steering wheel is centered.
- Luce di alimentazione: Indicates the remote control's power status.
- Spia luminosa: Shows pairing status and signal strength.
5.2 Consigli di guida
- Iniziare con velocità ridotte per abituarsi ai comandi.
- The truck is designed for off-road use and performs well on dirt, gravel, and uneven surfaces.
- Avoid driving in deep water or extremely muddy conditions to prevent damage to electronic components.
- Practice turning and braking to master drifting and precise control. The high-torque servo provides excellent responsiveness.

The JJRC Q39 HIGHLANDER RC Desert Truck demonstrating its maximum speed capability of 40 KM/H on various surfaces.
6. Manutenzione
6.1 Pulizia
- After each use, especially in dusty or dirty conditions, clean the truck with a soft brush or compressed air to remove debris.
- Pulisci il corpo con l'adamp stoffa. Non utilizzare prodotti chimici o solventi aggressivi.
- Assicurarsi che tutte le parti mobili siano libere da ostruzioni.
6.2 Cura della batteria
- Scollegare sempre la batteria dal camion quando non è in uso.
- Store LiPo batteries in a cool, dry place, away from direct sunlight and heat sources.
- Non sovraccaricare o scaricare eccessivamente la batteria.
6.3 Componente suview

Un esploso view of the JJRC Q39 HIGHLANDER's internal components, including the motor, differential, shock absorbers, electronic speed control, and servo.

The 390 Powerful High Speed Magnetic Motor, responsible for the truck's acceleration and climbing capabilities.

The 19G High Speed Servo, providing 10 N.m of torque for precise steering control and immediate feedback.
7. Risoluzione Dei Problemi
- Il camion non risponde: Ensure both the truck and remote control are powered on and properly paired. Check battery levels in both devices.
- Short run time: The battery may not be fully charged, or it may be nearing the end of its lifespan. Ensure proper charging procedures are followed.
- Poor steering control: Adjust the servo fine-tuning dial on the remote control. Check for any obstructions in the steering mechanism.
- Loss of range: Ensure there are no strong interference sources nearby. Check remote control battery level.
8. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Nome del modello | Q39 HIGHLANDER |
| Scala | 1:12 |
| Sistema di azionamento | 4WD (trazione integrale) |
| Velocità massima | Up to 35km/h (40km/h as per some images) |
| Tipo di motore | 390 Powerful High Speed Magnetic Motor |
| Servo | 19G High Speed Servo (10 N.m torque) |
| Batteria | 7.4 V 1500 mAh LiPo (polimeri di litio) |
| Tempo di ricarica | Circa 2.5 ore |
| Tempo di esecuzione | Circa 15 minuti |
| Frequenza del telecomando | 2.4GHz |
| Batterie per telecomando | 3 batterie AA da 1.5 V (non incluse) |
| Materiale | Polyester (Body/Chassis components) |
| Colore | Blu e nero |
| Dimensioni (spedizione) | Dimensioni: 39.9 x 27.7 x 20 cm |
| Peso (spedizione) | 2.08 kg |
9. Garanzia e supporto
For warranty information, technical support, or replacement parts, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase. Refer to the official JJRC websito o sulla confezione del prodotto per informazioni di contatto specifiche.