1. Introduzione
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Combuh 24-inch LED Vanity Light Bar. Please read these instructions thoroughly before installation and retain them for future reference.
Figure 1: Combuh 24-inch LED Vanity Light Bar.
The Combuh LED Vanity Light Bar is designed to provide modern, cool white illumination for bathrooms and vanity areas. Featuring a sleek design, durable construction, and energy-efficient LED technology, this fixture is suitable for indoor use only.
2. Informazioni importanti sulla sicurezza
- Prima di iniziare l'installazione, disattivare sempre l'alimentazione elettrica tramite l'interruttore automatico.
- Installation should be performed by a qualified electrician or a person with adequate electrical knowledge.
- Assicurarsi che tutti i collegamenti elettrici siano sicuri e conformi alle normative elettriche locali.
- This fixture is designed for 110 Volts AC power supply.
- Do not use with a dimmer switch. Using a dimmer switch will cause stroboscopic flicker. Use a standard ON/OFF switch (not included).
- This product is rated IP44 for splash-proof protection, suitable for humid bathroom environments.
- This light is intended as an auxiliary light source and may not provide sufficient illumination for an entire bathroom.
3. Contenuto della confezione
Verificare che tutti i componenti siano presenti prima dell'installazione:
- 1 x Combuh LED Vanity Light Bar
- Piastra di montaggio 1 x
- 3 x Viti
- 3 x tasselli di espansione
- 3 dadi per cavi
Figura 2: Componenti inclusi per l'installazione.
4. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Combustione |
| Numero di modello | 4894773455992 |
| Dimensioni | 24"L x 3.3"W x 4.3"H (60 cm L x 11 cm W x 11 cm H) |
| Fonte di alimentazione | Elettrico con cavo |
| Voltage | 110 Volt |
| Cosatage | 14 Watt |
| Luminosità | 1250 lumen |
| Temperatura del colore | 6000 Kelvin (bianco freddo) |
| Materiale | Aluminum, SUS304 Stainless Steel, Acrylic |
| Tipo di finitura | Chrome mirror shining base |
| Caratteristiche speciali | Not Dimmable, IP44 Anti-Fog |
| Tipo di installazione | Wall Mount (Hardwire) |
| Uso consigliato | Indoor use only: Bathroom, Washroom, WC, Living Room, Cabinet, Table |
Figura 3: Dimensioni del prodotto e specifiche principali.
5. Istruzioni per l'installazione
Follow these steps for safe and proper installation. Ensure power is OFF at the circuit breaker before starting.
- Preparare la superficie di montaggio: Ensure the electrical junction box is securely installed in the wall.
- Fissare la piastra di montaggio: Secure the provided mounting plate to the junction box using the screws. Ensure it is level.
- Connessioni dei cavi: Connect the electrical wires from the fixture to the house wiring using the wire nuts. Match live (black), neutral (white), and ground (green/bare copper) wires.
- Dispositivo sicuro: Align the light fixture with the mounting plate and secure it with the provided screws.
Figura 4: Guida all'installazione passo passo.
Video 1: Installazione finitaview of the Combuh Bathroom Light Fixtures by Combuh_usa.
Video 2: Detailed installation and features of the Combuh 24 inch Modern LED Vanity Light by Combuh_usa.
6. Funzionamento
Once installed, operate the light fixture using a standard wall switch. This fixture is not dimmable and will provide a consistent 6000K cool white light.
Figure 5: The vanity light provides soft, uniform illumination for daily tasks.
7. Manutenzione
- Pulizia: Per pulire l'apparecchio, assicurarsi che l'alimentazione sia spenta. Pulire con un panno morbido e asciutto.amp panno. Non usare detergenti abrasivi o solventi.
- Longevità dei LED: The integrated LED module is designed for long-term use and does not require bulb replacement.
- Grado di protezione IP44: The IP44 rating ensures resistance to splashes, making it suitable for bathroom environments.
Figure 6: The IP44 splash-proof design ensures durability in wet environments.
8. Risoluzione Dei Problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Nessuna alimentazione; cablaggio allentato; interruttore difettoso. | Check circuit breaker. Verify all wire connections. Test the wall switch. |
| Sfarfallio di luce. | Interruttore dimmer incompatibile; cablaggio allentato. | Ensure a standard ON/OFF switch is used (not dimmable). Check wiring connections. |
| La luce non è abbastanza intensa. | Fixture used as primary light source in a large area. | This fixture is designed for auxiliary lighting. Consider additional lighting for larger spaces. |
9. Garanzia e supporto
This product comes with a manufacturer-and-seller-combination warranty. For specific warranty details or technical support, please refer to your purchase documentation or contact Combuh customer service.
Per ulteriore assistenza, visitare il sito Combuh Store on Amazon.