Manuale di istruzioni della luce solare con sensore di movimento per esterni LE WL4000

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Immagine 1.1: Passoview of the LE Solar Outdoor Motion Sensor Light WL4000.

2. Caratteristiche del prodotto

• Ampio angolo di illuminazione: Features 3 adjustable heads providing 270° wide lighting coverage.
• Alta luminosità: Delivers 1000 lumens of 6500K daylight illumination.
• Ricarica solare efficiente: Converts sunlight into electricity, charging during the day for night operation.
• PIR sensore di movimento: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• Funzionamento automatico: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• Resistente e resistente alle intemperie: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• Installazione semplice: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

Immagine 2.3: Raggio e angolo di rilevamento del sensore di movimento.

3. Contenuto della confezione

• LE Solar Outdoor Motion Sensor Light (WL4000)
• Hardware di montaggio (viti e tasselli a muro)
• Manuale d'uso

4. Configurazione e installazione

Follow these steps for proper installation of your solar light:

1. Scegli una posizione: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. Installare la Lamp Titolare: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. Attiva la luce: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. Appendere la luce: Carefully hang the solar light unit onto the installed lamp titolare.
5. Regola le teste delle luci: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

Immagine 4.1: Procedura di installazione passo dopo passo.

Image 4.2: Fixing the lamp supporto con viti.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp titolare.

5. Istruzioni per l'uso

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• Operazione diurna: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• Operazione notturna: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• Spegnimento automatico: The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. Manutenzione

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• Pulire il pannello solare: Pulire regolarmente il pannello solare con un panno morbido e asciutto.amp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
• Ostacoli chiari: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• Ispezionare per danni: Periodically check the light for any physical damage, loose connections, or signs of wear.
• Resistenza alle intemperie: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. Risoluzione Dei Problemi

If your solar light is not functioning as expected, consider the following common issues and solutions:

• La luce non si accende di notte:
  • Assicurarsi che l'interruttore di alimentazione sia in posizione ON.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• Il sensore di movimento non rileva:
  • Assicurarsi che il sensore non sia ostruito.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. Specifiche

9. Garanzia e supporto

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.