BAFANG C965 LCD Display User Manual

1. Introduzione

This user manual provides detailed instructions for the installation, operation, and maintenance of your BAFANG C965 LCD Display. This display is designed for use with Bafang Mid Drive motors that utilize the UART communication protocol. Please read this manual thoroughly before using the product to ensure safe and correct operation.

The BAFANG C965 LCD Display offers essential information for your electric bicycle, including speed, battery level, assistance level (PAS), and trip data, enhancing your riding experience.

2. Informazioni sulla sicurezza

• Always ensure the display is securely mounted and all cables are properly connected before riding.
• Non tentare di aprire o modificare l'unità display. Ciò potrebbe invalidare la garanzia e causare danni.
• Keep the display screen clean and free from obstructions to ensure clear visibility of information.
• Evitare di esporre il display a temperature estreme o alla luce solare diretta per periodi prolungati.
• In case of malfunction, refer to the troubleshooting section or contact Bafang support.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• BAFANG C965 LCD Display Unit
• Staffa di montaggio del manubrio
• Unità pulsante di controllo
• Manuale dell'utente (questo documento)

4. Configurazione e installazione

Follow these steps to install your BAFANG C965 LCD Display:

1. Montaggio dello schermo: Attach the handlebar mounting bracket to your bicycle's handlebar. The bracket is compatible with handlebar diameters of 22.2mm, 25.4mm, and 31.8mm. Secure the C965 display unit into the bracket.
2. Cavi di collegamento: Connect the 5-pin female connector from the display unit to the corresponding male connector on your Bafang Mid Drive motor system. Ensure the connection is firm and secure.
3. Mounting Control Buttons: Position the external control button unit on your handlebar within easy reach. Connect its cable to the display unit.

Figure 1: Bafang C965 LCD display unit with cables and mounting bracket.

Figure 2: Bafang C965 LCD display mounted on an e-bike handlebar.

5. Istruzioni per l'uso

Once installed, operate your BAFANG C965 LCD Display as follows:

• Accensione/spegnimento: Press and hold the power button on the external control unit to turn the display on or off.
• Adjusting PAS Level: Use the '+' and '-' buttons on the control unit to increase or decrease the Pedal Assist System (PAS) level.
• Visualizzazione delle informazioni: The display cycles through various information screens. Use the 'M' (Mode) button to switch between different data views such as trip distance, total distance, average speed, max speed, and time.
• Controllo fari: If your e-bike system supports it, a dedicated button or a long press of a specific button (refer to your motor's manual) may control the headlights.

Figure 3: Bafang C965 LCD display showing active riding data.

6. Funzioni e indicatori del display

The C965 display provides various indicators and data points:

• Visualizzazione della velocità: Shows current speed, average speed (AVG), and maximum speed (MAX).
• Indicatore della batteria: Visualizza il livello di carica residua della batteria.
• Livello PAS: Indicates the current pedal assist level (0-9 or 0-3, depending on configuration).
• Indicatore di chilometraggio: Shows trip distance and total odometer reading.
• Indicatore di alimentazione: Displays real-time motor power output.
• Tempo: Current time or trip duration.
• Indicatore dei freni: Si illumina quando vengono azionati i freni.
• Indicatore di errore: Displays error codes if a system fault occurs.
• Accensione fari: Indicates when the e-bike's headlights are active.

Figure 4: Bafang C965 LCD display icons and basic specifications.

7. Manutenzione

To ensure the longevity and optimal performance of your C965 display:

• Pulizia: Pulisci lo schermo e il corpo del display con un panno morbido e asciutto.amp panno. Non usare detergenti abrasivi o solventi.
• Resistenza all'acqua: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. Avoid submerging the unit in water.
• Temperatura: Operate the display within its specified temperature range of -20°C to 60°C.
• Ispezione dei cavi: Controllare periodicamente tutti i cavi e i connettori per verificare la presenza di segni di usura o danni.

8. Risoluzione Dei Problemi

If you encounter issues with your BAFANG C965 LCD Display, consider the following:

• Il display non si accende:
  • Assicurarsi che la batteria della bici elettrica sia carica e collegata correttamente.
  • Check all cable connections between the display, control unit, and motor for looseness or damage.
  • Verificare che il pulsante di accensione sia premuto correttamente.
• Letture errate di velocità/distanza:
  • Controllare il corretto allineamento e la pulizia del sensore di velocità e del magnete sulla ruota.
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) is correct.
• Codici di errore visualizzati:
  • Refer to your Bafang motor's specific error code list for detailed explanations and solutions. Common issues include motor, controller, or sensor faults.
  • Often, turning the system off and on again can clear temporary errors.
• I pulsanti non rispondono:
  • Check the connection of the external control button unit to the display.
  • Ensure buttons are not physically stuck.

If problems persist after attempting these steps, contact Bafang customer support or your authorized dealer for assistance.

9. Specifiche

10. Garanzia e supporto

BAFANG products are typically covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, warranty inquiries, or spare parts, please contact your original retailer or visit the official BAFANG websito per informazioni di contatto del servizio clienti.