Manuale utente del kit di avviamento per svapo Innokin Kroma R 80W

Introduzione

Welcome to the user manual for your new Innokin Kroma R 80W Vape Starter Kit. This powerful and compact device is designed to provide an exceptional vaping experience, supporting both Direct-to-Lung (DTL) and Mouth-to-Lung (MTL) vaping styles. Crafted from premium quality zinc alloy with an ergonomic design, the Kroma R fits comfortably in your hand. Please read this manual thoroughly to ensure proper use, maintenance, and safety.

Prodotto finitoview

Immagine 1: The Innokin Kroma R 80W Vape Starter Kit, showcasing its sleek silver finish, ergonomic design, and the attached Zlide tank.

Guida all'installazione

1. Installazione della batteria

1. Locate the battery door at the bottom of the Kroma R mod.
2. Push the lock mechanism to open the spring-loaded battery door.
3. Insert a fully charged 18650 battery into the battery compartment, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Close the battery door firmly until it clicks into place.

2. Tank Installation

1. Screw the Zlide Tank onto the 510 connector at the top of the Kroma R mod. Turn clockwise until it is finger-tight. Do not overtighten.

3. E-liquid Filling (Zlide Tank)

1. To access the fill port, push the top cap of the Zlide Tank sideways at the indicated arrow. This will reveal the filling slot.
2. Insert the nozzle of your e-liquid bottle into the filling slot and gently squeeze to fill the tank. Do not overfill beyond the maximum fill line.
3. Una volta riempito, riposizionare il tappo superiore finché non scatta in posizione.
4. After filling, allow the tank to stand upright for at least 5 minutes to ensure the coil is fully saturated with e-liquid. This prevents dry hits and extends coil life.

Istruzioni per l'uso

Accensione/spegnimento

• To turn the device on or off, rapidly press the fire button (the large side button) three times within two seconds. The screen will display "Innokin" or "System Off".

Regolazione Wattage/voltage

• Utilizzare i pulsanti di regolazione '+' e '-' situati sotto lo schermo per aumentare o diminuire l'acquatage o voltage, depending on the selected mode.

Selezione della modalità

• To enter the mode selection menu, press and hold both the '+' and '-' adjustment buttons simultaneously.
• Navigate through the available modes (VW, VV, Boost, Bypass, Curve) using the '+' and '-' buttons.
• Press the fire button to confirm your selection.
• VW (Variable Wattage): Adjust power output in watts.
• VV (Variable Voltage): Adjust power output in volts.
• Aumento: Provides an initial power boost (Soft, Normal, Hard) for a stronger initial hit.
• Bypassare: Delivers direct battery output, mimicking a mechanical mod (use with caution and knowledge of Ohm's Law).
• Curva: Allows custom power output over time for a personalized vaping experience.

Svapare

• Once the device is on and the tank is filled, press and hold the fire button while inhaling from the mouthpiece. Release the button when you finish inhaling.

Manutenzione

Pulizia del dispositivo

• Regularly wipe down the Kroma R mod with a soft, dry cloth to remove dust and e-liquid residue.
• Per quanto riguarda il serbatoio, smontarlo e sciacquare i componenti (esclusa la serpentina) con acqua tiepida. Assicurarsi che tutti i componenti siano completamente asciutti prima di rimontarli.

Coil Replacement (Zlide Tank)

• When you notice a burnt taste, reduced vapor production, or diminished flavor, it's time to replace the coil.
• Svitare il serbatoio dal mod.
• Svitare la base del serbatoio.
• Pull out the old coil from the base.
• Insert a new Innokin Z-Coil into the base, ensuring it is seated firmly.
• Reassemble the tank and fill with e-liquid, allowing 5 minutes for saturation before use.

Carica della batteria

• Connect the micro-USB cable to the charging port on the Kroma R mod and the other end to a suitable USB power source (e.g., wall adapter, computer USB port).
• Lo schermo indicherà lo stato di carica.
• Per una durata ottimale della batteria e per la massima sicurezza, si consiglia di caricare le batterie 18650 utilizzando un caricabatterie esterno dedicato.

Risoluzione dei problemi

Specifiche

Informazioni importanti sulla sicurezza

DISCLAIMER LEGALE: The following warning only applies when the product is used with nicotine-containing e-liquid, this product contains nicotine which is a highly addictive substance. Keep this product out of the reach of children. Size of cartridge (not exceeding 2ml).

Precauzioni generali di sicurezza

• Do not use the device if it is damaged or has been submerged in water.
• Use only genuine Innokin coils and accessories.
• Non esporre il dispositivo a temperature estreme o alla luce solare diretta.
• Keep the device and e-liquids out of reach of children and pets.
• Always use high-quality, authentic 18650 batteries from reputable manufacturers.
• Never leave charging devices unattended, especially overnight.
• Smaltire le batterie e i componenti elettronici in modo responsabile, nel rispetto delle normative locali.

Garanzia e supporto

For warranty information and technical support, please refer to the warranty card included in your product packaging or visit the official Innokin website. If you encounter any issues not covered in this manual, please contact Innokin customer service for assistance.