Joby Wavo Mobile

Joby Wavo Mobile Microphone User Manual

Model: Wavo Mobile

Introduzione

The Joby Wavo Mobile is a compact and lightweight shotgun microphone designed to enhance audio quality for content creators using cameras and smartphones. It features a super-cardioid polar pattern, ensuring clear, directional audio capture by focusing on sounds directly in front of the microphone while minimizing ambient noise. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Wavo Mobile microphone.

Cosa c'è nella scatola

Upon unboxing your Joby Wavo Mobile, please verify that all components are present:

  • Wavo Mobile Microphone

Impostare

Follow these steps to properly set up your Joby Wavo Mobile microphone with your recording device.

1. Attaching to a Camera

The Wavo Mobile microphone can be easily mounted onto a camera's cold shoe mount. Ensure the microphone is securely fastened to prevent movement during recording.

Joby Wavo Mobile microphone mounted on top of a camera
Image: The Joby Wavo Mobile microphone securely mounted on a camera's cold shoe, connected via its coiled cable. This setup is ideal for capturing high-quality audio directly with your camera.

2. Attaching to a Smartphone

For smartphone use, the Wavo Mobile can be attached to a smartphone rig or tripod with a cold shoe mount. Connect the appropriate 3.5mm TRRS cable (not always included, check product packaging) to your smartphone's audio jack or a compatible adapter if your phone lacks a 3.5mm port.

Joby Wavo Mobile microphone mounted on a smartphone rig with a tripod
Image: The Joby Wavo Mobile microphone attached to a smartphone, which is mounted on a small tripod. This configuration demonstrates a portable setup for mobile content creation.

3. Cavi di collegamento

Use the provided 3.5mm cable to connect the microphone to your camera or smartphone. Ensure the connection is firm to avoid audio interruptions.

Istruzioni per l'uso

The Joby Wavo Mobile is designed for straightforward operation. No batteries are required as it is powered by your device.

1. Modello polare

The Wavo Mobile features a Super Cardioid polar pattern. This means it is highly directional, picking up sound primarily from the front and rejecting sounds from the sides and rear. Position the microphone to point directly at your sound source for optimal results.

2. Wind Protection

For outdoor recording or in windy conditions, attach the included furry windjammer (dead cat) to significantly reduce wind noise and plosives, ensuring clearer audio.

Joby Wavo Mobile microphone with a furry windjammer attached
Image: The Joby Wavo Mobile microphone with its furry windjammer (dead cat) installed. This accessory is crucial for minimizing wind noise during outdoor recordings.

3. Monitoraggio audio

If your camera or smartphone allows, monitor your audio with headphones during recording to ensure proper levels and sound quality. This helps identify and correct any issues in real-time.

Manutenzione

Proper care will extend the life and performance of your Joby Wavo Mobile microphone.

  • Pulizia: Utilizzare un panno morbido e asciutto per pulire il corpo del microfono. Evitare l'uso di detergenti liquidi o solventi.
  • Magazzinaggio: Conservare il microfono in un ambiente asciutto e privo di polvere quando non viene utilizzato.
  • Cura del cavo: Avoid sharp bends or kinks in the audio cables to prevent damage.

Risoluzione dei problemi

If you encounter issues with your Joby Wavo Mobile, refer to the following common problems and solutions.

  • Nessuna uscita audio:
    • Ensure the microphone cable is fully inserted into both the microphone and your recording device.
    • Check your camera or smartphone's audio input settings to ensure the external microphone is selected.
    • Se disponibile, effettuare una prova con un cavo diverso.
  • Poor Audio Quality / Excessive Noise:
    • Assicurarsi che il microfono sia puntato direttamente verso la sorgente sonora.
    • Use the furry windjammer in windy conditions.
    • Verificare eventuali interferenze elettromagnetiche provenienti da altri dispositivi.
    • Verify that your recording device's audio input levels are set correctly, avoiding clipping or overly low levels.

Specifiche

CaratteristicaDettaglio
MarcaJoby
Nome del modelloWavo Mobile
Tecnologia di connettivitàAusiliario
Tipo di connettoreClamp
Dispositivi compatibiliVideocamera, macchina fotografica, smartphone
Modello polareSuper cardioide
Impedenza16 Ohm
Fattore di forma del microfonoFucile da caccia
Fonte di alimentazioneCorded Electric (device powered)
Signal-to-Noise Ratio76 dB
Piattaforma hardwareTelecamera
Numero di canali1
Risposta in frequenza20KHz
Gamma di frequenza35Hz - 20KHz
ColoreNero
Materiale di recinzionePlastica
Peso dell'articolo181 grammi
Dimensioni dell'articolo50 x 50 x 28 centimetri
Numero di modelloJB01643-BWW
Codice UPC817024016432
Paese di origineIndia

Informazioni sulla garanzia

The Joby Wavo Mobile comes with a Garanzia di 1 anni. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the official Joby websito o contattare l'assistenza clienti.

Informazioni di supporto

For technical assistance, product inquiries, or warranty support, please contact the authorized importer or manufacturer:

  • Contatto dell'importatore: Srishti Digilife Pvt. Ltd., No. 7/3, Krishna Street, T. Nagar, Chennai-17. Email: info@srishtidigilife.co.in. Phone: +91 44 2815 4778.
  • Contatto del produttore: Vitec Co. Spa, Italy.

© 2026 Joby. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.