Introduzione
This manual provides comprehensive instructions for the setup, operation, and maintenance of your BOYA 2.4G Wireless Microphone Kit for Type-C Devices 1+2. The BY-WM4 PRO-K6 is a digital plug-in 2.4GHz wireless system designed for seamless audio recording with Android and other Type-C devices. It is ideal for live streaming, vlogging, podcasting, and various other audio capture needs.
Contenuto della confezione
Si prega di verificare che tutti gli articoli elencati di seguito siano inclusi nel pacchetto:
- 2 x BY-WM4 PRO Transmitters (TX4 Pro)
- 1 x BY-WM4 PRO RXU Receiver (Type-C connector)
- 2 microfoni lavalier omnidirezionali
- Other accessories as specified in the product packaging.

Image: Complete BOYA BY-WM4 PRO-K6 Wireless Microphone Kit components.
Caratteristiche del prodotto
- Digital 2.4GHz Wireless System
- Compatible with Android and other Type-C devices
- Dual-channel receiver for simultaneous use of two transmitters
- Selectable Stereo and Mono modes
- 3.5mm headphone jack on receiver for real-time monitoring
- Plug-and-play operation for immediate use
- Design compatto e leggero
Identificazione dei componenti
BY-WM4 PRO Transmitter (TX4 Pro)

Immagine: Frontale view of the BY-WM4 PRO Transmitter.
- LED di potenza: Indica lo stato di alimentazione e l'associazione.
- Ingresso microfono: 3.5mm jack for lavalier microphone.
- Interruttore di alimentazione: Controllo di accensione/spegnimento.
- Vano batteria: Houses 2 AAA batteries.

Image: BY-WM4 PRO Transmitter with open battery compartment.
The transmitter is powered by two AAA batteries. Ensure correct polarity when inserting batteries. The Power LED will illuminate when the device is on.
BY-WM4 PRO RXU Receiver

Immagine: Lato view of the BY-WM4 PRO RXU Receiver with labeled controls.
- Connettore di tipo C: For connecting to Android phones and other compatible devices.
- Pulsanti Volume +/-: Regola il volume di uscita.
- Pulsante di coppia: Avvia l'associazione con i trasmettitori.
- Interruttore M/S: Toggles between Mono (M) and Stereo (S) output modes.
- Jack per cuffie (3.5 mm): Per il monitoraggio audio in tempo reale.
- LED di potenza: Indica lo stato di alimentazione e connessione.
- Built-In Internal Antenna: Per la ricezione del segnale wireless.

Immagine: Fine view of the BY-WM4 PRO RXU Receiver, showing connectivity ports.
The receiver draws power directly from the connected Type-C device. The M/S switch allows you to select the audio output mode. In Mono mode, audio from both transmitters is mixed into a single channel. In Stereo mode, each transmitter's audio is output to a separate channel (left/right).
Impostare
- Installare le batterie nei trasmettitori: Open the battery compartment of each BY-WM4 PRO Transmitter and insert two AAA batteries, observing the correct polarity. Close the compartment.
- Collegare i microfoni Lavalier: Plug the 3.5mm connector of each lavalier microphone into the microphone input jack on the top of each transmitter.
- Collegare il ricevitore al dispositivo: Plug the Type-C connector of the BY-WM4 PRO RXU Receiver directly into the Type-C port of your Android phone or other compatible recording device. Ensure it is securely seated.
- Accensione dei trasmettitori: Slide the power switch on each transmitter to the "ON" position. The Power LED on the transmitter will illuminate.
- Abbinamento: The transmitters and receiver should automatically pair. If not, press the "Pair" button on the receiver. The Power LED on both the transmitter and receiver will indicate a successful connection (e.g., solid blue light).
- Select Output Mode: Use the M/S switch on the receiver to select your desired audio output mode (Mono or Stereo).
- Collegare le cuffie (facoltativo): For real-time audio monitoring, plug 3.5mm headphones into the headphone jack on the receiver.
- Regola volume: Use the Volume +/- buttons on the receiver to adjust the output audio level as needed.

Immagine: Example setup of the BOYA BY-WM4 PRO-K6 with a smartphone.
Istruzioni per l'uso
Once the system is set up and paired, you can begin recording audio. The BY-WM4 PRO-K6 is designed for plug-and-play operation with most compatible devices.
- Registrazione: Open your preferred audio or video recording application on your Type-C device. The system should be recognized as an external microphone.
- Monitoraggio: Use headphones connected to the receiver's 3.5mm jack to monitor the audio in real-time. This helps ensure optimal sound quality and proper microphone placement.
- Controllo del volume: Adjust the output volume using the +/- buttons on the receiver. This controls the level sent to your recording device.
- Selezione della modalità: Switch between Mono and Stereo modes using the M/S switch on the receiver based on your recording needs. Mono is suitable for single-person interviews or when you want both microphones mixed. Stereo is useful for separating two audio sources.
- Posizionamento del microfono: For best audio quality, clip the lavalier microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth, ideally on clothing.
Manutenzione
- Pulizia: Use a soft, dry cloth to clean the exterior of the transmitters and receiver. Do not use liquid cleaners or solvents.
- Sostituzione della batteria: Replace AAA batteries in the transmitters when the Power LED indicates low power or when audio quality degrades. Always use fresh batteries.
- Magazzinaggio: When not in use for extended periods, remove batteries from the transmitters to prevent leakage. Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
- Cura del cavo: Avoid sharp bends or kinks in the lavalier microphone cables to prevent internal damage.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna uscita audio. |
|
|
| Scarsa qualità audio / Disturbo statico. |
|
|
| Receiver not recognized by device. |
|
|
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Fattore di forma del microfono | Sistema microfono |
| Tecnologia di connettività | USB (Type-C), Wireless (2.4GHz) |
| Tipo di connettore | 3.5 mm Jack (for mic input and headphone output) |
| Modello polare | Omnidirectional (Lavalier Microphones) |
| Numero di canali | 2 |
| Signal-to-Noise Ratio | 75 dB |
| Livello di rumore | 84 dB |
| Sensibilità Audio | 90 dB |
| Fonte di alimentazione (trasmettitore) | 2 batterie AAA |
| Fonte di alimentazione (ricevitore) | Device Powered (Type-C) |
| Dimensioni articolo (L x P x A) | 2.6 x 1.6 x 1 inches (approximate for individual units) |
| Peso dell'articolo | 13.4 once (kit totale) |
| Numero di modello | BY-WM4PRO-K6 |
| Produttore | Ragazzo |
Garanzia e supporto
Per informazioni sulla garanzia e supporto tecnico, fare riferimento al sito ufficiale BOYA webo contattare direttamente il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.
BOYA Official Websito: www.boya-mic.com