Manuale d'uso

1. Introduzione

This manual provides essential information for the safe and effective use of your SupplySource AC/DC Adapter, specifically designed for Jodeway devices. This Class 2 power supply cord cable is suitable for various applications requiring a reliable wall home battery charger mains PSU.

The adapter is manufactured with high-quality materials and incorporates multiple smart features to safeguard against incorrect voltage (IV), short circuits (SC), and internal overheating (IO). It is certified with CE and FCC standards, ensuring safety and performance.

Figure 1: SupplySource AC/DC Adapter with its coiled power cable.

2. Informazioni sulla sicurezza

Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di utilizzare questo prodotto. Il mancato rispetto di queste istruzioni può causare scosse elettriche, incendi o lesioni gravi.

• Voltage Compatibilità: Ensure the DC output and tip size of the adapter are compatible with your device before connecting. Incorrect voltagpuò danneggiare la tua attrezzatura.
• Ventilazione: When using the adapter for extended periods, ensure adequate ventilation. Do not cover the adapter or place it on soft surfaces that may block ventilation openings.
• Condizioni ambientali: Avoid exposing the adapter to extreme temperatures, high humidity, or direct sunlight. Do not use in wet environments.
• Danni fisici: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter yourself. Refer all servicing to qualified personnel.
• Solo per uso interno: This adapter is designed for indoor use only.
• Bambini: Tenere fuori dalla portata dei bambini.

Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti e in buone condizioni all'apertura della confezione:

• 1 x SupplySource AC/DC Adapter (Model: JOD-S-050030A5-C-2)
• 2 x USB Cable (as per product listing, please verify upon receipt as the adapter typically has an integrated cable)

4. Guida all'installazione

Follow these steps to properly set up your AC/DC adapter:

1. Verifica compatibilità: Before connecting, confirm that the voltage and current requirements of your device match the output specifications of this adapter (refer to Section 6: Specifications). Also, ensure the barrel connector tip size is correct for your device's input port.
2. Connetti al dispositivo: Carefully insert the barrel connector of the adapter into the power input port of your Jodeway device or other compatible equipment. Ensure a snug fit.
3. Collegare alla presa di corrente: Plug the AC prongs of the adapter into a standard wall power outlet (100-240V AC, 50/60Hz).
4. Accensione: Once connected, your device should receive power. If your device has a power switch, turn it on.

Figure 2: The compact design of the adapter and its 4-foot cable length for flexible placement.

5. Istruzioni per l'uso

The SupplySource AC/DC Adapter is designed for straightforward operation:

• Once properly connected to both the device and a power outlet, the adapter will supply continuous power to your compatible electronic device.
• It functions as a direct power source or a battery charger, depending on the capabilities of the connected device.
• The adapter automatically adjusts to input voltages between 100-240V, making it suitable for international travel with appropriate plug adapters (not included).

6. Manutenzione

Una corretta manutenzione garantisce la longevità e il funzionamento sicuro dell'adattatore:

• Pulizia: Scollegare l'adattatore dalla presa di corrente e dal dispositivo prima di pulirlo. Utilizzare un panno morbido e asciutto per pulire la superficie. Non utilizzare detergenti liquidi o spray.
• Magazzinaggio: Quando non in uso, conservare l'adattatore in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme. Evitare di arrotolare troppo il cavo per evitare danni.
• Ispezione: Periodically inspect the adapter and its cable for any signs of wear, cuts, or damage. If damage is observed, discontinue use immediately and replace the adapter.

7. Risoluzione Dei Problemi

If you encounter issues with your SupplySource AC/DC Adapter, refer to the following common troubleshooting steps:

• Nessuna alimentazione al dispositivo:
  • Assicurarsi che l'adattatore sia collegato saldamente a una presa a muro funzionante. Provare la presa con un altro dispositivo.
  • Verify that the adapter's barrel connector is fully inserted into your device's power input.
  • Confirm that your device's power switch (if any) is in the "On" position.
  • Check if the adapter or cable shows any visible signs of damage. If so, discontinue use.
• Device Not Charging (if applicable):
  • Ensure the device's battery is not fully charged or defective.
  • Confirm the adapter's output specifications (voltage, amperage) match the device's charging requirements.
• Surriscaldamento dell'adattatore:
  • Disconnect the adapter immediately.
  • Ensure it is used in a well-ventilated area and not covered.
  • If overheating persists after ensuring proper ventilation, discontinue use and contact support.

If these steps do not resolve the issue, please refer to the Support & Contact section.

8. Specifiche

Detailed technical specifications for the SupplySource AC/DC Adapter:

9. Supporto e contatto

For any questions, concerns, or further assistance regarding your SupplySource AC/DC Adapter, please do not hesitate to contact us. We are committed to providing support and ensuring your satisfaction.

Please refer to the seller information on your purchase platform for direct contact methods, or visit the official SupplySource websito per le risorse di supporto.

Note: This manual is subject to change without prior notice. The latest version can be found on the manufacturer's websito.