EGLO G80 E26 LED Filament Bulb, 400lm, Warm White, Clear, Model 204663J Instruction Manual

Introduzione

This manual provides essential information for the safe and efficient use of your EGLO G80 E26 LED Filament Bulb, Model 204663J. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: EGLO G80 E26 LED Filament Bulb, front view.

Configurazione e installazione

Follow these steps to install your LED filament bulb:

1. La sicurezza prima di tutto: Before attempting any installation, ensure the power supply to the light fixture is turned OFF at the circuit breaker or wall switch.
2. Consenti raffreddamento: If replacing an existing bulb, allow the old bulb to cool completely before removal to prevent burns.
3. Rimuovere la vecchia lampadina: Svitare con cautela la vecchia lampadina dal portalampada E26 ruotandola in senso antiorario.
4. Installare una nuova lampadina: Gently screw the EGLO G80 LED Filament Bulb into the E26 socket by turning it clockwise until it is snug. Do not overtighten.
5. Ripristina alimentazione: Una volta installata saldamente la lampadina, ripristinare l'alimentazione elettrica all'apparecchio di illuminazione.

Importante: This bulb is designed for E26 base sockets only. Ensure your fixture is compatible before installation.

Figure 2: EGLO G80 E26 LED Filament Bulb with dimensions (Diameter 80mm x Height 120mm).

Istruzioni per l'uso

The EGLO G80 LED Filament Bulb operates like a standard light bulb. Once installed in a compatible fixture with power restored, simply use the fixture's switch to turn the light ON or OFF.

• Accensione/spegnimento: Use the wall switch or fixture switch to control the bulb's illumination.
• Non dimmerabile: This bulb is not designed for use with dimmer switches. Using it with a dimmer may cause damage to the bulb or fixture, and will void the warranty.

Figure 3: EGLO G80 E26 LED Filament Bulb illuminated in a light fixture.

Manutenzione

The EGLO LED Filament Bulb requires minimal maintenance.

• Pulizia: To clean the bulb, ensure the power is OFF and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Sostituzione: When the bulb reaches the end of its rated life, replace it with a new EGLO G80 E26 LED Filament Bulb or a compatible E26 LED bulb.

Risoluzione dei problemi

If your EGLO LED Filament Bulb is not functioning correctly, consider the following:

• La lampadina non si accende:
  • Check if the power switch for the fixture is ON.
  • Ensure the bulb is screwed in securely into the E26 socket.
  • Verificare che l'interruttore automatico dell'apparecchio non sia scattato.
  • Test the bulb in another working E26 fixture, or test another known working bulb in the original fixture to determine if the issue is with the bulb or the fixture.
• Sfarfallio:
  • Ensure the bulb is not used with a dimmer switch, as this bulb is not dimmable.
  • Controllare che non vi siano collegamenti allentati nell'apparecchio o nell'interruttore a parete.

If problems persist after performing these checks, consult a qualified electrician or contact customer support.

Specifiche

Informazioni sulla garanzia

This product comes with a warranty of up to 1 year. Please refer to the specific warranty terms and conditions provided at the time of purchase for full details regarding coverage and claims.

Assistenza clienti

For further assistance, technical support, or warranty claims, please contact the retailer from whom you purchased the product or refer to the EGLO official websito per le informazioni di contatto.