Flexson S5-FS Floor Stand for Sonos Five Instruction Manual

1. Introduzione

This manual provides detailed instructions for the assembly, operation, and maintenance of your Flexson S5-FS Floor Stand, specifically designed for the Sonos Five speaker. Please read these instructions carefully before beginning assembly to ensure correct installation and safe use.

Image 1.1: The Flexson S5-FS Floor Stand in black, shown without a speaker.

Caratteristiche principali:

• Bespoke design securely holds the Sonos Five / Play:6 speaker.
• Allows horizontal or vertical orientation of the Sonos Five / Play:6.
• Processo di assemblaggio semplice e veloce.
• Constructed from durable aluminum with a metal finish.

2. Istruzioni per l'installazione

Follow these steps for the correct assembly of your Flexson S5-FS Floor Stand.

2.1. Contenuto della confezione

Prima di iniziare, assicurati che tutti i componenti siano presenti:

• Piastra di base
• Palo di supporto principale
• Piastra di montaggio dell'altoparlante
• Fixing Screws and Allen Key
• Cable Management Clips (if included)

Image 2.1: Individual components of the Flexson S5-FS Floor Stand.

2.2. Fasi di assemblaggio

1. Attach the Main Support Pole to the Base Plate: Align the bottom of the main support pole with the designated hole on the base plate. Secure it using the provided screws and Allen key. Ensure it is tightened firmly for stability.
2. Attach the Speaker Mounting Plate to the Main Support Pole: Position the speaker mounting plate at the top of the main support pole. Use the remaining screws and Allen key to fasten it securely.
3. Gestione dei cavi: If included, attach the cable management clips along the rear of the main support pole. These will help route the speaker's power cable neatly.

Image 2.2: Close-up of the speaker mounting plate, showing the secure fit for the Sonos Five.

3. Istruzioni per l'uso

Once assembled, the Flexson S5-FS Floor Stand provides a stable and optimal listening position for your Sonos Five speaker.

3.1. Placing the Sonos Five Speaker

1. Carefully place your Sonos Five speaker onto the speaker mounting plate. The stand is designed to hold the speaker in either a horizontal or vertical orientation.
2. Ensure the speaker is seated firmly and centrally on the mounting plate for optimal balance and stability.
3. Route the speaker's power cable through the integrated cable management system (if applicable) to maintain a tidy appearance and prevent tripping hazards.

Image 3.1: Sonos Five speaker mounted vertically on the Flexson S5-FS Floor Stand in a living room setting.

Image 3.2: Sonos Five speaker mounted horizontally on the Flexson S5-FS Floor Stand in a modern living space.

4. Manutenzione

To ensure the longevity and appearance of your Flexson S5-FS Floor Stand, follow these simple maintenance guidelines:

• Pulizia: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp È possibile utilizzare un panno e asciugare immediatamente. Evitare detergenti abrasivi o solventi, poiché potrebbero danneggiare la finitura.
• Controllo di stabilità: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain optimal stability.
• Posizionamento: Avoid placing the stand in direct sunlight or near heat sources, which could affect the material over time.

5. Risoluzione Dei Problemi

If you encounter any issues with your Flexson S5-FS Floor Stand, refer to the following common problems and solutions:

• Il supporto sembra instabile:
  • Assicurarsi che tutte le viti di montaggio siano ben serrate.
  • Verificare che il supporto sia posizionato su una superficie piana e livellata.
  • Confirm the Sonos Five speaker is correctly seated on the mounting plate.
• Speaker does not fit correctly:
  • Ensure you are attempting to mount a Sonos Five (or Play:6) speaker. This stand is specifically designed for these models.
  • Check for any obstructions on the mounting plate or the speaker itself.
• Cables are not tidy:
  • Utilize the integrated cable management system. If clips are provided, ensure they are correctly installed and holding the cable securely.

6. Specifiche

7. Informazioni sulla garanzia

The Flexson S5-FS Floor Stand is covered by a Garanzia del produttore di 1 anni. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims. For specific terms and conditions, refer to the warranty documentation provided with your product or contact Flexson customer support.

8. Supporto

For further assistance, technical support, or inquiries regarding your Flexson S5-FS Floor Stand, please contact Flexson customer service. You can typically find contact information on the official Flexson websito o tramite il tuo rivenditore.

Produttore: Flexson

Modello: S5-FS