1. Introduzione
The FMS Pitts V2 1400mm RC Aerobatic Biplane is a high-performance remote control aircraft designed for aerobatic maneuvers. Built with robust EPO foam, it features a powerful 4258 brushless motor, 50A Hobbywing ESC, and responsive 17g servos, ensuring precise control and exhilarating flight. Its design includes authentic detailing and a large battery bay for extended flight times.
Image: The FMS Pitts V2 1400mm RC Aerobatic Biplane in a dynamic flight pose.
2. Informazioni sulla sicurezza
Always operate your RC aircraft in a safe and responsible manner. Failure to do so may result in injury or damage to property. Please observe the following safety guidelines:
- Leggi l'intero manuale: Familiarize yourself with all product features and operating instructions before use.
- Età consigliata: This product is recommended for users 14 years and older.
- Area di volo: Fly in open areas away from people, buildings, and other obstacles. Avoid flying near power lines or busy roads.
- Condizioni meteo: Non volare in caso di vento forte, pioggia o altre condizioni meteorologiche avverse.
- Controllo pre-volo: Eseguire sempre un controllo approfondito prima del volo per assicurarsi che tutti i componenti siano saldamente fissati e funzionino correttamente.
- Sicurezza della batteria: Utilizzare solo batterie e caricabatterie consigliati. Seguire tutte le istruzioni di ricarica e gestione delle batterie per prevenire incendi o lesioni.
- Sicurezza dell'elica: Keep hands, face, and loose clothing away from the rotating propeller.
- Mantenere il controllo: If you lose control of the aircraft, immediately reduce throttle and attempt to regain control.
3. Cosa c'è nella scatola
The FMS Pitts V2 1400mm PNP (Plug and Play) package includes the following components:
- FMS Pitts V2 1400mm Airframe (fuselage, wings, tail sections)
- 4258 Brushless Motor (pre-installed)
- 50A Hobbywing-sourced Electronic Speed Controller (ESC) (pre-installed)
- 17g Servos (pre-installed, 4x)
- Elica
- Carrello di atterraggio
- Puntoni alari
- Small parts for assembly (screws, pushrods, etc.)
Note: This PNP version does NOT include a battery, radio transmitter, or charger.
Image: All components of the FMS Pitts V2 1400mm laid out for assembly.
4. Installazione e montaggio
The FMS Pitts V2 features an ingeniously designed screw-together mechanism for swift and hassle-free assembly. Follow these steps:
- Disimballare i componenti: Carefully remove all airplane components from the packaging.
- Attacca le ali: Securely attach the wings to the fuselage using the provided screw-together mechanism. Ensure proper alignment.
- Install Wing Struts: Slide the wing struts onto the wings and secure them in place.
- Installare il carrello di atterraggio: Attach the landing gear to the fuselage.
- Installare l'elica: Mount the propeller onto the motor shaft.
- Install Receiver & Speed Control: If not pre-installed, install your receiver and speed control.
- Collegare i servi: Connect the pre-installed servos to your receiver according to your radio system's instructions.
- Inserire la batteria: Place your 6S battery (not included) into the oversized battery compartment. Ensure it is secured to prevent shifting during flight.
- Centro di gravità (CG): Verify the aircraft's Center of Gravity (CG) is within the recommended range (refer to specifications section). Adjust battery position if necessary.
- Configurazione radio: Bind your radio transmitter to the receiver and set up control throws as recommended by your radio system's manual.
Immagine: Primo piano view of the 4258 brushless motor, 50A Hobbywing ESC, and 17g servos.
5. Istruzioni per l'uso
The FMS Pitts V2 is designed for high-powered aerobatic performance. Its robust EPO construction ensures durability, while authentic detailing enhances the flying experience.
Controlli pre-volo:
- Assicurarsi che la batteria sia completamente carica e installata saldamente.
- Check all control surfaces (ailerons, elevator, rudder) for free movement and correct direction.
- Verificare che l'elica sia fissata saldamente e non danneggiata.
- Confirm radio signal strength and range.
Decollare:
Position the aircraft into the wind on a clear runway. Gradually increase throttle to full, applying slight up-elevator as needed for a smooth lift-off. The powerful motor will provide ample thrust for quick takeoffs.
Volo:
The Pitts V2 is highly maneuverable, capable of a wide range of aerobatic stunts. Its responsive 17g servos allow for precise control. Practice basic maneuvers before attempting advanced aerobatics. The large capacity battery bay accommodates powerful 6S packs for extended flight times.
Landing:
Approach the runway into the wind. Gradually reduce throttle and maintain a controlled descent. Apply slight up-elevator just before touchdown for a soft landing. The robust landing gear is designed to handle various landing conditions.
Images: Various dynamic flight shots of the FMS Pitts V2 1400mm RC Biplane.
Video ufficiale del prodotto:
Video: FMS 1400mm Pitts V2 - Flight and Features. This video showcases the aircraft's flight capabilities and key features.
6. Manutenzione
Regular maintenance will ensure the longevity and optimal performance of your FMS Pitts V2.
- Pulizia: Dopo ogni volo, pulire l'aereo con un panno morbido e asciutto per rimuovere sporco, polvere o umidità.
- Ispezione: Regularly inspect the airframe for any cracks, dents, or damage to the EPO foam. Check control surfaces, hinges, and pushrods for wear or looseness.
- Elica: Inspect the propeller for nicks, cracks, or bends. Replace if damaged to ensure balanced flight and prevent motor strain.
- Motore e ESC: Ensure the motor spins freely and the ESC connections are secure. Avoid overheating the motor and ESC.
- Servi: Check servos for smooth operation and ensure they are securely mounted.
- Cura della batteria: Store batteries in a cool, dry place. Do not overcharge or over-discharge LiPo batteries.
7. Risoluzione Dei Problemi
If you encounter issues with your FMS Pitts V2, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'aereo non risponde ai comandi | Unbound receiver, low transmitter/receiver battery, damaged wiring. | Re-bind receiver, check battery levels, inspect and repair wiring. |
| Il motore non gira | Disconnected motor/ESC, faulty ESC, low battery. | Check all connections, test ESC, charge/replace battery. |
| Poor flight performance/unstable | CG errato, trim della superficie di controllo errato, cellula danneggiata. | Adjust CG, trim control surfaces, inspect and repair airframe. |
| Tempi di volo brevi | Batteria non completamente carica, batteria vecchia/danneggiata. | Ensure full charge, replace old batteries. |
8. Specifiche
| Caratteristica | Valore |
|---|---|
| Dimensioni del prodotto | 47.5 x 19.5 x 12.5 pollici |
| Peso dell'articolo | 14 libbre |
| ASIN | B089Q56CGH |
| Numero modello articolo | Modello FMM126P |
| Età consigliata dal produttore | 14 anni e oltre |
| Produttore | Modello FMS |
Image: Detailed specifications table for the FMS Pitts V2 1400mm.
9. Garanzia e supporto
FMS is committed to providing quality products and support. For any inquiries or issues, please refer to the following:
- Politica di ritorno: This product is subject to a 30-day refund/replacement return policy.
- Pacco danneggiato: If your package was damaged during shipping, please contact FMS support immediately. Keep all packing material and original boxes. Provide photos of the damaged product and box.
- Wrong Product Received: If you received the wrong product, contact FMS support. Keep all packing material and original boxes. The incorrect item must be returned new and unused (FMS will cover return shipping).
- Produttore: Modello FMS
- Negozio del marchio: Visitare il FMS Store on Amazon per ulteriori prodotti e supporto.