1. Introduzione
Thank you for choosing the Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use.

Image 1: Altec Lansing Super Lifejacket Jolt Bluetooth Speaker. This image shows the front view of the speaker, highlighting its rugged design and speaker grilles.
Cosa c'è nella scatola:
- Altec Lansing Super Lifejacket Jolt Speaker
- Cavo di ricarica CA.
2. Caratteristiche del prodotto
- Customizable Lights: Features 5 different LED light modes that can illuminate in a solid color, flash, or sync to the beat of your music.
- Vero accoppiamento wireless: Allows pairing with another compatible speaker for ampsuono lificato.
- Ricarica integrata: Includes a Qi wireless charging pad and built-in dual USB charging ports for external devices.
- Durata prolungata della batteria: Provides up to 30 hours of battery life.
- Tutto è una prova: IP68 rated for waterproof, snowproof, and shockproof protection, and designed to float in water.
3. Controlli e indicatori
Familiarize yourself with the buttons and controls located on the top panel of your Super Lifejacket Jolt speaker.
Video 1: Using the Super LifeJacket Jolt. This video demonstrates the various buttons and features of the speaker, including power, Bluetooth pairing, volume, microphone, Qi charging pad, and lighting controls.
- Pulsante di accensione (⏻): Press and hold for 3-5 seconds to turn the speaker on or off.
- Link Button (🔗): Used to connect your speaker to Bluetooth and to enable House Party pairing mode.
- Lighting Button (✱): Controls the lighting effects on your speaker. Cycle through multicolor slow fade, beat-to-music, solid color, slow fade, and off.
- Pulsante Meno (-): Decreases music volume. Can also be used to go back to the previous song.
- Pulsante Più (+): Increases music volume. Allows you to jump to the next song.
- Pulsante del microfono (🎤): Answers calls and accesses voice assistant features.
- Qi Charging Pad: Located on the top center, allows for wireless charging of Qi-enabled devices.
4. Impostazione
4.1 Ricarica dell'altoparlante
Before initial use, fully charge your Super Lifejacket Jolt speaker. A full charge typically takes 5 to 6 hours.
- Open the protective flap on the side of the speaker to reveal the charging port.
- Plug one end of the included AC charging cable into the DC IN port on the speaker.
- Collegare l'altra estremità del cavo di ricarica a una fonte di alimentazione.
- The power button LED will illuminate red while charging. It will turn off when fully charged.

Image 2: Speaker with charger. This image displays the speaker alongside its AC charging adapter, illustrating the charging setup.
4.2 Accensione/Spegnimento
To power on your speaker, press and hold the Power Button (⏻) located on the top of the speaker for 3 to 5 seconds. You will hear an audible prompt indicating it's powering on. To power off, repeat the same action.
4.3 Associazione Bluetooth
After powering on, the LED light on the Link Button (🔗) will begin flashing blue, indicating it's ready for pairing.
- Abilita il Bluetooth sul tuo dispositivo (smartphone, tablet, ecc.).
- Cercare dispositivi Bluetooth disponibili.
- Select "Super Lifejacket Jolt" from the list.
- Once paired, the Link Button LED will stop flashing and remain solid blue.
5. Istruzioni per l'uso
Ricarica wireless Qi da 5.1
The speaker features a Qi wireless charging pad to charge compatible devices. Ensure your speaker is powered on to use this feature.
- Place your Qi-enabled device directly onto the Qi charging pad on top of the speaker.
- Il dispositivo dovrebbe indicare che si sta caricando in modalità wireless.

Image 3: Speaker at a picnic. This image shows the speaker in an outdoor setting, with a smartphone placed on its Qi charging pad.
5.2 Customizable LED Lights
Premere il pulsante Illuminazione (✱) to cycle through the 5 available LED light modes:
- Multicolor Slow Fade
- Beat-to-Music
- Tinta unita
- Lenta dissolvenza
- Spento
5.3 House Party Pairing
For an enhanced audio experience, you can pair two Super Lifejacket Jolt speakers together using House Party pairing mode. Refer to the Altec Lansing website for detailed instructions on enabling this feature.
6. Manutenzione
The Super Lifejacket Jolt is designed for durability and outdoor use with an IP68 rating, making it waterproof, snowproof, and shockproof. It also floats in water.

Image 4: Speaker floating in water. This image demonstrates the speaker's ability to float, highlighting its waterproof design.
Pulizia:
Per pulire l'altoparlante, utilizzare un panno morbido eamp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or protective seals. Ensure all port covers are securely closed before exposing the speaker to water.
Magazzinaggio:
Quando non viene utilizzato per lunghi periodi, conservare l'altoparlante in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
7. Risoluzione Dei Problemi
If you encounter issues with your speaker, try the following steps:
- Nessun potere: Ensure the speaker is fully charged. Connect it to a power source using the provided AC adapter.
- Impossibile associare il Bluetooth: Make sure the speaker is in pairing mode (flashing blue LED on Link Button). Turn off and on your device's Bluetooth, then try pairing again. Ensure no other devices are currently connected to the speaker.
- Nessun suono: Check the volume levels on both the speaker and your connected device. Ensure the speaker is successfully paired via Bluetooth.
- Qi Charging Not Working: Confirm your device is Qi-enabled and properly aligned on the charging pad. Ensure the speaker is powered on.
For further assistance, please visit the Altec Lansing support websito.
8. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Marca | Altec-Lansing |
| Numero di modello | IMW889L |
| Potenza massima in uscita dell'altoparlante | 10 Watt |
| Tecnologia di connettività | Bluetooth, USB |
| Modalità di uscita audio | Stereo |
| Durata media della batteria | 30 ore |
| È impermeabile | Vero (classificazione IP68) |
| Portata Bluetooth | 10 metri |
| Porte USB 2.0 totali | 2 |
| Dimensioni dell'articolo (P x L x A) | 14.5"P x 5.8"L x 7.6"A |
| Peso dell'articolo | 2.73 chilogrammi |
9. Garanzia e supporto
Informazioni sulla garanzia:
Questo prodotto viene fornito con un 1 anno di garanzia completa from the manufacturer, Altec Lansing. Please retain your proof of purchase for warranty claims.
Assistenza clienti:
For additional support, troubleshooting tips, or to register your product, please visit the official Altec Lansing websito: www.alteplansing.com
Video 2: Altec IMW889L Video. This video provides a brief overview of the Altec Lansing IMW889L speaker.