Manuale utente del telecomando Lepro per strisce luminose a LED bianche regolabili

Introduzione

Thank you for choosing the Lepro Remote Controller for your Tunable White LED Strip Light. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

Prodotto finitoview

The Lepro Remote Controller is designed to provide convenient control over your tunable white LED strip lights, allowing you to adjust brightness, color temperature, and activate various lighting modes.

Immagine: Frontale view of the Lepro Remote Controller.

Funzioni dei pulsanti del telecomando

Image: Diagram illustrating the functions of each button on the Lepro Remote Controller.

• Pulsanti ON/OFF: Power on or off the LED strip light.
• 60S OFF Button: Activates a 60-second auto-off timer.
• Pulsanti Luminosità +/-: Regola il livello di luminosità della luce.
• WW (Warm White) Button: Sets the light to a warm white color temperature.
• NW (Neutral White) Button: Sets the light to a neutral white color temperature.
• DW (Daylight White) Button: Sets the light to a daylight white (cool white) color temperature.
• Colour Temperature +/- Buttons: Regolare la temperatura del colore tra bianco caldo e bianco freddo.
• Pulsante MODE: Cycles through fast/slow flash modes.
• Scene Buttons (Morning/Evening/Night): Activates pre-set lighting scenes.

Impostare

Installazione della batteria

The remote controller requires 1 Lithium Metal battery (included). Before first use, please remove the insulation sheet from the battery compartment.

Image: Illustration showing how to remove the insulation sheet from the battery compartment.

1. Individuare il vano batterie sul retro del telecomando.
2. Pull out the plastic insulation sheet if it is present.
3. If replacing the battery, open the battery cover and insert the new battery, ensuring correct polarity (+/-).
4. Chiudere bene il coperchio della batteria.

Pairing (If Applicable)

This remote control uses Radio Frequency (RF) technology and is typically pre-paired with compatible Lepro tunable white LED strip lights (e.g., models 410098, 410049). If your remote does not respond to the light strip, ensure the light strip is powered on and within the maximum range of 10 meters. No manual pairing procedure is usually required for this model.

Istruzioni per l'uso

Once the battery is installed, you can begin controlling your LED strip light.

• Accensione/spegnimento: Premere il tasto ON pulsante per accendere la luce e il SPENTO pulsante per spegnerlo.
• Regolazione della luminosità: Utilizzare il Luminosità +/- buttons (sun icon with up/down arrows) to increase or decrease the light intensity.
• Selezione temperatura colore:
  • Premere WW for Warm White.
  • Premere NW for Neutral White.
  • Premere DW for Daylight White (Cool White).
  

  Image: Visual representation of Warm White, Natural White, and Cool White color temperatures.
• Fine-tuning Color Temperature: Utilizzare il Colour Temperature +/- buttons (yellow up/down arrows) to incrementally adjust the color temperature.
• Modalità flash: Premere il tasto MODALITÀ button to cycle through different fast/slow flash modes.
• Modalità scena: Select pre-set scenes using the dedicated buttons:
  • Morning Scene: (Sunrise icon)
  • Evening Scene: (Sunset icon)
  • Scena notturna: (Moon and stars icon)
• 60-Second Auto Off: Premere il tasto 60S SPENTO button to activate a timer that will turn off the light after 60 seconds.

Manutenzione

Pulizia

To clean the remote controller, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

Sostituzione della batteria

If the remote control's range decreases or it becomes unresponsive, the battery may need to be replaced. Refer to the "Battery Installation" section under Setup for instructions.

Nota: Smaltire le batterie usate in modo responsabile secondo le normative locali.

Risoluzione dei problemi

Specifiche

• Modello: 500014
• Marca: Lebbroso
• Dimensioni del prodotto: Dimensioni: 8.5 x 4 x 0.7 cm
• Peso: 20 grammi
• Batteria: 1 batteria al litio metallico (necessaria)
• Tecnologia di connettività: Radiofrequenza (RF)
• Portata massima: 10 metri
• Numero di pulsanti: 14
• Dispositivi compatibili: Lepro LED Strip Light 410098, LED Strip Light 410049

Informazioni importanti

Riciclaggio delle lampadine

For information on recycling this product and other types of lamps, please consult local recycling guidelines and facilities.

Informazioni sulla rottura e pulizia delle lampadine

In case of breakage or damage to associated light bulbs, follow proper clean-up and disposal procedures as recommended by local authorities. Avoid direct contact with broken glass or internal components.

Garanzia e supporto

Per informazioni sulla garanzia e sull'assistenza clienti, fare riferimento al sito ufficiale Lepro websito o contatta il tuo rivenditore. Conserva la ricevuta d'acquisto come prova d'acquisto.

Per ulteriore assistenza, puoi visitare il Lepro Store su Amazon.