Maxlite SL-48231-50

Manuale di istruzioni Maxlite Shop Light SL-48231-50

Model: SL-48231-50

Prodotto finitoview

The Maxlite Shop Light SL-48231-50 is a 48-inch, 23W, 120V LED shop light designed for various indoor applications such as garages, workshops, and basements. It provides instant full brightness with a 5000K daylight color temperature and is ENERGY STAR certified for energy efficiency. This fixture features a built-in on/off pull chain, a 5ft power cord with a 120V plug, and is linkable with up to 4 units for extended lighting coverage.

Maxlite Shop Light SL-48231-50

Image: Maxlite Shop Light SL-48231-50, a white 48-inch LED fixture with a pull chain and power outlet on one end.

Informazioni sulla sicurezza

Always read and follow all safety instructions before installation and operation. Disconnect power before servicing. This product is intended for indoor use only. Do not modify the fixture or use it for purposes other than its intended use.

  • Ensure the power supply is turned off at the circuit breaker before installation.
  • Do not install near heat sources or in wet locations.
  • Use appropriate mounting hardware for your installation surface.
  • Do not exceed the maximum linkable units (4 units).

Configurazione e installazione

The Maxlite Shop Light SL-48231-50 is designed for semi-flush ceiling mount installation. No assembly is required for the light fixture itself.

Contenuto della confezione:

  • 1 x Maxlite Shop Light SL-48231-50
  • Mounting hardware (hooks, chains, screws)
  • 5ft power cord with 120V plug

Fasi di installazione:

  1. Preparare l'area di installazione: Choose a suitable location for mounting, such as a garage, workshop, or basement. Ensure the surface can support the weight of the fixture (approximately 15.5 ounces).
  2. Spegnimento dell'alimentazione: Before beginning any electrical work, turn off the power to the installation area at the main circuit breaker.
  3. Montare l'apparecchio:
    • Mark the desired mounting points on the ceiling or wall.
    • Install the provided mounting hardware (e.g., ceiling hooks or screws) securely into the marked points.
    • Hang the shop light using the installed hardware. The fixture has screw holes for flush mounting.
  4. Connetti alimentazione: Plug the 5ft power cord into a standard 120V electrical outlet.
  5. Link Multiple Units (Optional): If linking multiple units, connect the linking cable from the output end of one fixture to the input end of the next. Do not exceed 4 linked units.
  6. Ripristina alimentazione: Una volta completata l'installazione e verificati tutti i collegamenti, riattivare l'alimentazione tramite l'interruttore automatico.

Istruzioni per l'uso

The Maxlite Shop Light SL-48231-50 is simple to operate using its integrated pull chain.

  • Accensione: Gently pull the chain extending from the fixture once to turn the light on.
  • Disattivazione: Gently pull the chain again to turn the light off.

The light provides instant full brightness upon activation.

Manutenzione

The Maxlite Shop Light SL-448231-50 requires minimal maintenance due to its LED technology.

  • Pulizia: Before cleaning, ensure the power is disconnected. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
  • Sostituzione della lampadina: This fixture uses integrated LED lighting and does not require bulb replacement. If the LEDs fail, the entire fixture typically needs to be replaced.
  • Ispezione: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
La luce non si accende.
  • Nessuna corrente alla presa.
  • Pull chain is in the "off" position.
  • Apparecchio difettoso.
  • Check the circuit breaker and ensure the outlet is live.
  • Pull the chain to cycle the light on.
  • Contattare l'assistenza clienti per ricevere assistenza.
La luce tremola o si affievolisce.
  • Collegamento allentato.
  • Voltage fluttuazioni.
  • Fixture nearing end of life.
  • Assicurarsi che il cavo di alimentazione sia collegato saldamente.
  • Consultare un elettricista se voltagI problemi persistono.
  • Contatta l'assistenza clienti.
Linked lights do not work.
  • Incorrect linking connection.
  • Exceeded maximum linked units.
  • Verify linking cables are properly connected.
  • Assicurarsi che non siano collegate più di 4 unità.

Specifiche

CaratteristicaDettaglio
MarcaMaxlite
Numero di modelloCodice articolo: SL-48231-50
Dimensioni del prodotto48 cm L x 2.5 cm P x 2 cm A
Peso dell'articolo15.5 once
Tipo di sorgente luminosaGUIDATO
Cosatage23 watt
Voltage120 Volt
Temperatura del colore5000K (luce diurna)
Metodo di controlloControllo a catena
Tipo di montaggioCeiling Mount (Semi Flush)
Uso interno/esternoAl chiuso
Fonte di alimentazioneElettrico con cavo
collegabileFino a 4 unità
CertificazioniENERGY STAR certified, ETL

Garanzia e supporto

Informazioni sulla garanzia:

This Maxlite product comes with a Limited Warranty. For specific terms and conditions of the warranty, please refer to the documentation included with your purchase or visit the official Maxlite website. The provided data states "Warranty Description: N/a.", indicating general warranty information is not detailed here, but a limited warranty is offered.

Assistenza clienti:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Maxlite customer support. Visit the official Maxlite websito per le informazioni di contatto più aggiornate.

You can also visit the Maxlite store on Amazon for more information: Maxlite Amazon Store

© 2023 Maxlite. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.