Akozon Akozondhfstyga9v

Akozon 36V 6-Wire E-bike Speed Control Thumb Throttle Assembly

Model: Akozondhfstyga9v

Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Akozon 36V 6-Wire Speed Control Thumb Throttle Assembly. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Informazioni sulla sicurezza

  • Always disconnect the e-bike's battery before performing any installation or maintenance.
  • Assicurarsi che tutti i collegamenti elettrici siano sicuri e isolati per evitare cortocircuiti.
  • Verify the throttle's voltage compatibility (36V) with your e-bike system.
  • Do not attempt to modify the throttle assembly.
  • In caso di dubbi su una qualsiasi fase dell'installazione, consultare un tecnico qualificato.

Contenuto della confezione

  • 1 x Akozon E-bike Thumb Throttle (Grip not included)
  • 1 terminali di cablaggio
  • 1 x Round Fixed Terminal
Akozon 36V 6-Wire E-bike Speed Control Thumb Throttle Assembly with wiring
Image: The Akozon 36V 6-Wire E-bike Speed Control Thumb Throttle Assembly, showing the main unit with its attached wiring harness and terminals.

Specifiche

Condizione Nuovo di zecca
Materiale PVC + ABS
Colore Nero
Voltage 36V
Conteggio dei fili 6 fili
Lunghezza del cavo Circa 165 cm (65 pollici)
Peso Circa. 142 g (5 once)
Compatibilità Lithium battery electric bikes

Configurazione e installazione

1. Mounting the Throttle

  1. Identify a suitable position on your e-bike's handlebars, typically on the left side, ensuring it does not interfere with brake levers or gear shifters.
  2. Allentare la clamp screw on the throttle assembly.
  3. Slide the throttle onto the handlebar.
  4. Adjust the position for comfortable thumb operation and tighten the clamp avvitare saldamente. Non stringere eccessivamente.
Lato view of the Akozon thumb throttle mounted on a handlebar
Immagine: Lato view of the thumb throttle, illustrating its compact design and how it mounts onto a handlebar without obstructing other controls.

2. Collegamenti elettrici

The throttle assembly features a 6-wire configuration. Connect these wires to your e-bike's controller according to the following color code. Use the provided wiring terminals for secure connections.

  • Filo rosso: +5V (Power supply for throttle)
  • Filo nero: Negativo (terra)
  • filo bianco: Signal Output (Throttle signal)
  • Filo verde: Positive (Battery voltage input for indicator)
  • filo giallo: Switch (On/Off function, if applicable)
  • Filo marrone: Switch (On/Off function, if applicable)

Ensure that the wiring connections are correct and insulated to prevent any electrical issues. Incorrect wiring can damage the throttle or the e-bike's controller.

Istruzioni per l'uso

1. Controllo della velocità

Once installed and connected, the thumb throttle provides sensitive and even speed control. Press the thumb lever forward to increase speed. Release the lever to return to a neutral position and reduce speed.

Close-up of the Akozon thumb throttle with the thumb lever
Immagine: un primo piano view of the thumb throttle, highlighting the ergonomic thumb lever for speed control.

2. Battery Capacity Display

The throttle assembly includes an integrated battery capacity display with three LED indicators: FULL, HALF, and EMPTY. These indicators provide a visual representation of your e-bike's battery charge level.

  • PIENO: Indicates a high battery charge.
  • METÀ: Indicates a medium battery charge.
  • VUOTO: Indicates a low battery charge, requiring a recharge.
Close-up of the Akozon thumb throttle's battery capacity display
Immagine: Un dettaglio view of the thumb throttle's battery capacity display, showing the 'FULL', 'HALF', and 'EMPTY' indicators.
Akozon thumb throttle with illuminated battery indicators
Image: The thumb throttle with its battery indicators illuminated, demonstrating the visual feedback for battery charge level.

Manutenzione

  • Keep the throttle assembly clean and free from dirt and debris. Use a soft, dry cloth for cleaning.
  • Controllare regolarmente tutti i collegamenti elettrici per verificarne la tenuta e l'eventuale presenza di segni di usura o danni.
  • Ensure the thumb lever moves freely and returns to its neutral position without sticking.
  • Avoid exposing the throttle to extreme weather conditions or prolonged direct sunlight.

Risoluzione dei problemi

1. Throttle Not Responding

  • Check all wiring connections to ensure they are secure and correctly matched according to the wiring diagram.
  • Verify that the e-bike's battery is charged and properly connected.
  • Ensure the e-bike's power is on.
  • Inspect the throttle cable for any kinks or damage.

2. Incorrect Battery Indicator Reading

  • Confirm that the throttle's voltage (36V) matches your e-bike's battery voltage. Mismatched voltages can lead to inaccurate readings.
  • Check the green wire connection, which supplies power to the indicator.

3. Sticking Thumb Lever

  • Clean any dirt or debris around the pivot point of the thumb lever.
  • Ensure the throttle is not overtightened on the handlebar, which could impede lever movement.

Garanzia e supporto

For warranty information or technical support, please contact Akozon customer service through the retailer where the product was purchased. Please have your product model number (Akozondhfstyga9v) and purchase details ready.

© 2024 Akozon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.