1. Introduzione
The Ledlenser H15R Core is a high-performance, rechargeable LED headlamp designed for demanding users. It offers up to 2,500 lumens of brightness, a long lighting time, and features like magnetic charging and Flex Sealing technology for robust protection against dust and water.
Cosa c'è nella scatola
- Ledlenser H15R Core Headlight
- Dedicated Rechargeable Battery (Li-ion)
- Cavo di ricarica USB magnetico
Image 1.1: The Ledlenser H15R Core headlamp shown with its included magnetic USB charging cable.
2. Impostazione
2.1 Carica iniziale
Prima del primo utilizzo, caricare completamente la testinaamp's dedicated rechargeable battery. Connect the magnetic end of the USB charging cable to the charging port on the battery pack. Connect the USB-A end of the cable to a suitable USB power source (e.g., computer, USB wall adapter). The charging indicator lights on the battery pack will show the charging status. A full charge typically takes approximately 5.5 hours.
Immagine 2.1: Primo piano view of the magnetic charging port on the battery pack, with the magnetic USB cable attached.
2.2 Regolazione dell'archetto
Posizionare la testataamp on your head. Adjust the elastic headband straps to ensure a comfortable and secure fit. The headlamp should be snug enough to stay in place during activity but not so tight as to cause discomfort. The lamp head can be tilted up or down to direct the light beam as needed.
Image 2.2: The Ledlenser H15R Core headlamp positioned on a mannequin head, illustrating proper wear and headband adjustment.
3. Istruzioni per l'uso
3.1 Accensione/spegnimento
Per girare la testaamp on or off, press the power button located on the side of the lamp head. A single press will turn the light on to its last used setting or a default low setting.
3.2 Brightness Control (Stepless Dimming)
The H15R Core features stepless dimming. While the light is on, press and hold the power button to gradually increase or decrease the brightness. Release the button when the desired brightness level is reached. The headlamp also has predefined modes:
- Modalità Boost: Double-press the power button quickly to activate maximum brightness (2,500 lumens) for a short period.
- Modalità di alimentazione: Standard high brightness (1,000 lumens).
- Modalità a basso consumo: Energy-saving low brightness (20 lumens) for extended runtimes.
3.3 Focusing the Light Beam
il capoamp utilizes Ledlenser's Advanced Focus System. To adjust the beam from a wide floodlight to a focused spot beam, rotate the bezel around the lens. This allows for versatile illumination depending on your activity.
Immagine 3.1: Un primo piano view of the front of the Ledlenser H15R Core headlamp, showing the adjustable focus ring around the lens.
4. Manutenzione
4.1 Pulizia
Pulisci la testinaamp and headband with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port is clean and dry before charging. The Flex Sealing technology provides IP67 protection, meaning it is dust-tight and protected against temporary immersion in water (up to 1 meter for 30 minutes).
4.2 Cura della batteria
The Li-ion battery is designed for long life. For optimal performance, avoid fully discharging the battery frequently. If storing the headlamp for an extended period, charge the battery to approximately 50-70% capacity and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
4.3 Conservazione
Conservare la testaamp in a dry, cool environment away from direct sunlight and extreme temperatures. Ensure the headlamp è spento per evitare attivazioni accidentali e il consumo della batteria.
5. Risoluzione Dei Problemi
5.1 Problemi comuni e soluzioni
- headlamp non si accende:
Assicurarsi che la batteria sia carica. Collegare la testaamp to the charger and check if the charging indicator lights activate. - La luce è fioca o tremolante:
The battery may be low. Recharge the battery fully. Check for any debris on the lens that might obstruct the light. - headlamp non addebita:
Verify that the magnetic charging cable is securely connected to both the headlamp and the USB power source. Try a different USB port or power adapter. Ensure the charging contacts are clean. - La regolazione della messa a fuoco è rigida:
Clean the focus mechanism with a soft, dry cloth. Avoid using lubricants.
6. Specifiche
6.1 Dati tecnici
| Caratteristica | Specificazione |
|---|---|
| Luminous Flux (Boost/Power/Low) | 2,500 / 1,000 / 20 lumen |
| Irradiation Distance (Boost/Power/Low) | 250 metri / 170 metri / 20 metri |
| Lighting Time (Power/Low) | 5 ore / 80 ore |
| Tipo di batteria | Dedicated Li-ion rechargeable battery |
| Tempo di ricarica | Circa 5.5 ore |
| Dimensioni del prodotto (L x A x P) | 75 x 53 x 55 mm (3.0 x 2.1 x 2.2 pollici) |
| Body Weight (including batteries) | Circa. 380 g (13.4 oz) |
| Grado di protezione | IP67 (Dust-tight, protected against temporary immersion) |
| Tipo di sorgente luminosa | GUIDATO |
| Materiale | Plastica |
| Numero di modello | 502123 |
7. Garanzia e supporto
For information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your product or visit the official Ledlenser website. If you encounter issues not covered in this manual or require further assistance, please contact Ledlenser customer support.