EKO EK6088L-MT Automatic Liquid Soap Dispenser User Manual

Introduzione

Thank you for choosing the EKO EK6088L-MT Automatic Liquid Soap Dispenser. This device is designed to provide a hygienic and convenient handwashing experience by automatically dispensing liquid soap without physical contact. Featuring a sleek design, adjustable dispense levels, and USB-rechargeable functionality, this dispenser is an ideal addition to any modern home or office environment. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Informazioni sulla sicurezza

• Non immergere il dispenser in acqua o altri liquidi.
• Avoid direct sunlight or strong light exposure to the sensor.
• Do not use abrasive cleaners or harsh chemicals on the dispenser.
• Keep out of reach of children to prevent accidental activation or ingestion of soap.
• Use only liquid soap. Foam type detergents can be used if diluted appropriately as per soap manufacturer instructions.
• Assicurarsi che il coperchio della porta di ricarica sia ben chiuso quando non è in carica, per evitare infiltrazioni d'acqua.

Prodotto finitoview

Familiarize yourself with the components of your EKO EK6088L-MT Automatic Liquid Soap Dispenser.

Figura 1: Dimensioni del prodotto. The compact design of the EKO EK6088L-MT dispenser measures approximately 4.72 inches (12cm) in length, 2.75 inches (7cm) in width, and 6.89 inches (17.5cm) in height, making it suitable for various countertop spaces.

• Dispensing Nozzle: Where soap is released.
• Sensore di movimento: Rileva il movimento della mano per l'erogazione automatica.
• Power Button/Dispense Level Control: Controls power and adjusts soap volume.
• Porta di ricarica USB: Per ricaricare la batteria interna.
• Soap Level Window: Transparent window to monitor remaining soap.
• Tappo superiore: Removable cap for refilling the soap reservoir.

Impostare

1. Ricarica del distributore

Figure 2: USB Charging Port. The dispenser features a USB charging port located on the back, covered by a silicone flap. A full charge provides extended use.

1. Locate the USB charging port on the back of the dispenser, usually covered by a silicone flap.
2. Connect the provided USB charging cable to the port and plug the other end into a suitable USB power adapter (not included).
3. La spia luminosa indicherà lo stato di carica (ad esempio, rossa per la carica in corso, blu per la carica completa).
4. A full charge typically takes approximately 2 hours and can power the dispenser for up to 3 months, depending on usage.

2. Filling with Soap

Figure 3: Effortless Refills. To refill, gently press down on the top cap to open the reservoir. Pour liquid soap directly into the opening. The transparent window on the front allows monitoring of the soap level.

1. Gently press down on the top cap of the dispenser to open the soap reservoir.
2. Pour your preferred liquid hand soap or dish soap into the reservoir. The maximum capacity is 250 milliliters.
3. Do not overfill. Leave a small air gap at the top.
4. Securely close the top cap by pressing it back into place until it clicks.

Istruzioni per l'uso

1. Accensione/spegnimento

• To turn on the dispenser, press and hold the power button on the back for a few seconds until the indicator light illuminates.
• To turn off the dispenser, press and hold the power button again until the indicator light turns off.

2. Erogazione del sapone

Figure 4: Touchless Dispensing. The dispenser uses an infrared motion sensor to detect your hand, automatically releasing a measured amount of soap for hygienic, touchless operation.

• Place your hand directly under the dispensing nozzle.
• The motion sensor will detect your hand and automatically dispense a pre-set amount of soap.
• Remove your hand once the desired amount of soap has been dispensed.

3. Regolazione del volume di erogazione

Figure 5: Adjustable Dispense Levels. The dispenser offers three adjustable dispense levels (0.8ml, 1.4ml, 2ml) to suit individual preferences. This setting can be changed via the power button.

• With the dispenser powered on, briefly press the power button to cycle through the three dispense volume settings.
• Each press will change the dispense volume (e.g., 0.8ml, 1.4ml, 2ml), indicated by a change in the indicator light color or flash pattern.
• Select the desired volume for your needs.

Manutenzione

1. Pulizia del distributore

• Pulire l'esterno del dispenser con un panno morbido eamp panno. Non utilizzare materiali abrasivi o prodotti chimici aggressivi.
• Ensure no water enters the charging port or battery compartment.

2. Preventing Detergent Clogging

• If using thick liquid soaps, dilute them with water (e.g., 1 part soap to 2-3 parts water) to ensure smooth dispensing and prevent clogging.
• Regularly check the dispensing nozzle for any dried soap residue and clean it gently with a soft brush or cloth.

3. Internal Cleaning Function

• The dispenser is equipped with an internal cleaning function to help prevent buildup. Refer to the product packaging or EKO website for specific instructions on activating this feature.
• Typically, this involves running water through the dispenser for a short period.

Risoluzione dei problemi

Specifiche

• Numero modello: EK6088L-MT
• Marca: EKO
• Tipo di articolo: Dispensatore automatico di sapone liquido
• Colore: Argento
• Materiale: Acciaio
• Tipo di materiale gratuito: Senza BPA
• Dimensioni del prodotto (L x P x A): 4.72" x 2.76" x 6.89" (12 cm x 7 cm x 17.5 cm)
• Peso dell'articolo: 0.37 Kilograms (11.3 oz / 335 g)
• Liquid Volume Capacity: 250 millilitri (9 fl oz)
• Fonte di energia: Ricaricabile tramite USB
• Dispense Levels: 3 adjustable levels (e.g., 0.8ml, 1.4ml, 2ml)
• Tipo di sensore: Sensore di movimento a infrarossi
• Paese di origine: Cina

Garanzia e supporto

For warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official EKO websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.