Behringer RX1202FX V2 12-Channel Analog Mixer with FX

Introduzione

The Behringer RX1202FX V2 is a premium 12-input microphone/line mixer designed for professional audio applications. This 3U rack-mountable analog mixer offers ultra-low noise operation and versatile connectivity for various audio setups. It features high-quality XENYX microphone preamps, a warm 2-band 'British' EQ on each channel, and a studio-grade 24-bit multi-FX processor with 100 presets including reverb, chorus, flanger, delay, and pitch shifter.

This manual provides essential information for the safe and efficient operation of your RX1202FX V2 mixer. Please read it thoroughly before use and retain it for future reference.

Importanti istruzioni di sicurezza

AVVERTIMENTO: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Leggere queste istruzioni.
• Conservare queste istruzioni.
• Prestate attenzione a tutti gli avvertimenti.
• Seguire tutte le istruzioni.
• Non utilizzare questo apparecchio vicino all'acqua.
• Pulire solo con un panno asciutto.
• Non bloccare le aperture di ventilazione. Installare secondo le istruzioni del produttore.
• Non installare vicino a fonti di calore come radiatori, bocchette di riscaldamento, stufe o altri apparecchi (inclusi amplificatori) che producono calore.
• Non vanificare lo scopo di sicurezza della spina polarizzata o di tipo con messa a terra. Una spina polarizzata ha due lame, una più larga dell'altra. Una spina di tipo con messa a terra ha due lame e un terzo polo di messa a terra. La lama larga o il terzo polo sono forniti per la tua sicurezza. Se la spina fornita non si adatta alla tua presa, consulta un elettricista per la sostituzione della presa obsoleta.
• Proteggere il cavo di alimentazione da eventuali calpestamenti o schiacciamenti, in particolare in prossimità delle spine, delle prese di corrente e del punto di uscita dall'apparecchio.
Utilizzare solo accessori/componenti specificati dal produttore.
• Scollegare l'apparecchio durante i temporali o quando non viene utilizzato per lunghi periodi di tempo.
• Affidare tutti gli interventi di assistenza a personale di assistenza qualificato. L'assistenza è richiesta quando l'apparecchio è stato danneggiato in qualsiasi modo, ad esempio se il cavo di alimentazione o la spina sono danneggiati, se è stato versato del liquido o sono caduti degli oggetti nell'apparecchio, se l'apparecchio è stato esposto a pioggia o umidità, se non funziona normalmente o se è caduto.

Impostare

1. Disimballaggio e ispezione

Carefully unpack your RX1202FX V2 mixer. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging materials for future shipping or if the unit needs to be returned for service.

2. Montaggio su rack

The RX1202FX V2 is designed for standard 19-inch rack mounting, occupying 3U of rack space. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation openings.

3. Collegamento elettrico

Connect the supplied power cord to the AC/POWER inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the voltage matches the requirements specified on the unit. The mixer operates at 120 Volts.

4. Collegamento degli ingressi

The RX1202FX V2 offers 12 input channels:

• Ingressi microfono (canali 1-8): Use balanced XLR cables for connecting microphones. These channels feature XENYX preamps.
• Ingressi di linea (canali 1-12): Use balanced 1/4" TRS or unbalanced 1/4" TS cables for connecting line-level sources such as keyboards, drum machines, or other audio devices. Channels 9-12 are stereo line inputs.
• Ingresso CD/nastro: Connect external playback devices (e.g., CD player, media player) using RCA cables to the CD/TAPE IN jacks.

5. Collegamento delle uscite

• Uscite principali: Connect your main PA system or recording interface to the MAIN OUT (XLR) jacks.
• Uscite della sala di controllo: Connect your studio monitors to the CTRL OUT (1/4" TRS) jacks.
• Uscita cuffie: Connect headphones to the PHONES (1/4" TRS) jack for monitoring.
• Invii Aux: Use the AUX SENDS (1/4" TS) to send signals to external effects processors or monitor mixes.
• Aux Returns: Connect the output of external effects processors to the AUX RETURNS (1/4" TS) jacks.

Immagine: Rear panel of the Behringer RX1202FX V2 mixer. This view displays the AC power inlet, power switch, main XLR outputs, control room outputs, monitor outputs, CD/Tape inputs and outputs, Aux sends and returns, and the 8 XLR microphone inputs with corresponding 1/4" line inputs and inserts.

Istruzioni per l'uso

1. Accensione/Spegnimento

After all connections are made, press the AC/POWER switch on the rear panel to turn the unit on. Always turn on your mixer before connecting power amplifiers or active speakers, and turn it off after them, to prevent loud thumps.

2. Channel Controls (Channels 1-12)

Immagine: Front panel of the Behringer RX1202FX V2 mixer. This view highlights the individual channel strips with Gain, High EQ, Low EQ, MON (Monitor) send, FX send, PAN/BAL, and Level faders. The master section with the FX processor display, program knob, FX to Main/MON controls, CD/Tape controls, and Main Mix/Phones level controls is also visible.

• GUADAGNO: Adjusts the input sensitivity for the microphone or line input. Use the CLIP LED as a guide; it should flash only occasionally on the loudest peaks.
• EQ ALTO: Adjusts the high-frequency content of the channel.
• EQUALIZZAZIONE BASSA: Adjusts the low-frequency content of the channel.
• MON (Monitor) Send: Controls the amount of signal sent to the monitor output. This is pre-fader.
• Invio FX: Controls the amount of signal sent to the internal effects processor. This is post-fader.
• PAN/BAL: Pans the mono signal (channels 1-8) or balances the stereo signal (channels 9-12) across the stereo main mix.
• Fader di LIVELLO: Adjusts the overall output level of the channel to the main mix.
• LED CLIP: Illuminates when the input signal is too high, indicating potential distortion. Reduce the GAIN if this LED lights up frequently.

3. Alimentazione Phantom (+48V)

For condenser microphones, activate the +48V PHANTOM switch on the rear panel. Ensure microphones are connected before engaging phantom power to prevent damage.

4. FX Processor

The RX1202FX V2 includes a 24-bit multi-effects processor with 100 presets. Use the PROGRAM knob to select the desired effect. The FX TO MAIN and FX TO MON controls in the master section adjust the amount of the effect signal sent to the main mix and monitor mix, respectively.

5. Master Section Controls

• Fader MIX PRINCIPALE: Controlla il livello di uscita complessivo del mix stereo principale.
• PHONES/CTRL ROOM Level: Adjusts the output level for the headphones and control room outputs.
• CD/TAPE TO MAIN/CTRL ROOM: Buttons to route the CD/Tape input to the main mix or control room/phones output.

Manutenzione

Pulizia

Regularly clean the exterior of the mixer with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Keep faders and knobs free from dust and debris.

Magazzinaggio

When not in use for extended periods, store the mixer in a cool, dry environment, away from direct sunlight and extreme temperatures. If rack-mounted, ensure the rack provides adequate protection from dust and physical impact.

Risoluzione dei problemi

Specifiche

Garanzia

Behringer products, distributed by authorized MUSIC Tribe dealers, include a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty information provided with your product or visit the official Behringer websito.

Supporto

If you encounter issues not covered in the troubleshooting section, or require further assistance, please contact your authorized Behringer dealer or visit the official Behringer support website for up-to-date information, FAQs, and service contact details.